Search: Trailer Lights kit > !Fifth Wheel Installation Kit >
!Fifth Wheel Installation Kit
Filter ResultsBearing Kit, 15123/25580 Bearings, GS-2125DL Seal
In Stock
Features: Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin EZ Lube spindle washer Outer Bearing Inner Bearing Seal Seal I.D. 15123 25580 GS-2125DL
- Bearings
- Standard Bearings
- Bearing Kits
- 6000 lbs Axle
- Bearing 15123 and 25580
- etrailer
- Race 25520 and 15245
Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
In Stock
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring ...
Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate
Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Red and Amber
- Surface Mount
- Rectangle
- Kit
- Submersible Lights
- Optronics
- 8L x 3W Inch
Standard Trailer Light Kit with 25' Wire Harness
In Stock
Trailer kit with 2 stud mount tail lights; 2 stud mount amber clearance lights; license plate bracket; wire harness w/4-pole connectorStandard Trailer Light Kit with 25' Wire Harness This is a stud-mounted trailer light kit. The kit contains two stud-mount tail lights, two stud-mount, amber clearance marker lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Red and Amber
- Surface Mount
- Square
- Kit
- Non-Submersible Lights
- Optronics
- 5L x 4-1/2W Inch
Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
In Stock
Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting ...
Features: Red, submersible, trailer light kit with stud mount lights, license bracket, amber clearance lights, wiring harness, mounting hardware 2 Red, stud-mount, submersible tail lights (ST6RB
Features: Red, submersible, trailer light kit with stud mount lights, license bracket, amber clearance lights, wiring harness, mounting hardware 2 Red, stud-mount, submersible tail lights (ST6RB
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Red and Amber
- Surface Mount
- Square
- Kit
- Submersible Lights
- Optronics
- 5L x 4-1/2W Inch
Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
In Stock
Cam-action door latch with pre-installed 1" diameter pipe is ideal for side doors that are smaller than rear doors on your trailer. Double-action handle protects against jarring while driving ...
Features: Cam-action door latch with pre-installed pipe is ideal for side or small rear doors on utility trailers, vans, and trucks Bridge-type hasp helps prevent accidental opening and ensures safe
Features: Cam-action door latch with pre-installed pipe is ideal for side or small rear doors on utility trailers, vans, and trucks Bridge-type hasp helps prevent accidental opening and ensures safe
- Latches
- Cam Door Latch
- Lock Not Included
- 36 Inch Long
- Polar Hardware
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Precision, robotic welding maximizes strength and improves fit Bolt-on installation -
- Custom Fit Hitch
- Class III
- Visible Cross Tube
- 3500 lbs GTW
- 350 lbs TW
- 4000 lbs WD GTW
- etrailer
- 400 lbs WD TW
Explore Expert Info
![Our Expert]()
on Search Results
on Search Results
Peterson Clearance and Side Marker Trailer Light Kit - Submersible - Incandescent - Red Lens
In Stock
4-1/8" x 1-1/4" Rectangle. Waterproof, incandescent trailer light functions as both a clearance light and a side marker light. Premium bulbs for long life. Surface mounts with included ...
marker light or as a rear clearance light and side marker light. Surface Mount Light Installation Surface mount lights install flat against the surface of the trailer, so a hole does not need to be cut
marker light or as a rear clearance light and side marker light. Surface Mount Light Installation Surface mount lights install flat against the surface of the trailer, so a hole does not need to be cut
- Clearance Lights
- Rear Clearance
- Side Marker
- Red
- Surface Mount
- Rectangle
- Submersible Lights
- Peterson
- 4-1/8L x 1-1/4W Inch
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
In Stock
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
Peterson Trailer Tail Light Kit - Waterproof - Stop, Turn, Tail - Incandescent - Oval - Red Lens
In Stock
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer tail light functions as a stop, turn, and tail light. Durable polycarbonate lens is welded to housing. Flush mount with included ...
on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board. Recessed-Mount Light Recessed-mount trailer lights
on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board. Recessed-Mount Light Recessed-mount trailer lights
- Tail Lights
- Stop/Turn/Tail
- Red
- Recessed Mount
- Oval
- Submersible Lights
- Peterson
- 6-1/2L x 2-1/4W Inch
Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
Straight trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" ...
Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend
Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend
- Leaf Spring Suspension
- Easy Lube Spindles
- No Drop or Lift
- 2200 lbs
- Idler Hubs
- 5 on 4-1/2 Inch
- Dexter
- 60 Inch Long
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
In Stock
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate ...
Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate
Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Red
- Surface Mount
- Rectangle
- Kit
- Submersible Lights
- Optronics
- 6L x 3-1/2W Inch
Peterson LED Tail Light Kit for Trailers Over 80" Wide - 25' Harness - Driver and Passenger
In Stock
5-3/8" x 4-5/8" Square. Waterproof, LED lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers over 80". Stud ...
Features: Square combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear
Features: Square combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Red
- Kit
- Peterson
Timken Grease Seal - Single Lip - I.D. 1.250" / O.D. 1.983" - 203029 - TMK36ZR
In Stock
- Seals
- Grease Seals - Single Lip
- 1.983 Inch O.D.
- 1.250 Inch I.D.
- Timken
Mini LED Identification Light Kit for Trailers - Submersible - Amber LEDs - Clear Lens
In Stock
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets ...
Features: Trailer light kit functions as front identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements
Features: Trailer light kit functions as front identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements
- Clearance Lights
- Rear Clearance
- Amber
- Recessed Mount
- ID Bar
- Round
- Submersible Lights
- Optronics
- 3/4 Inch Diameter
Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2
In Stock
9" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your trailer.Features: Straight fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Welded backing plates add
- No Step
- 72 Inch Long
- 9 Inch Wide
- Steel
- etrailer
- For Tandem-Axle Trailers
LED Trailer License Plate Light Kit with Bracket - Submersible - 2 Diodes - Clear Lens
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire ...
Features: Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of LED
Features: Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of LED
- License Plate Lights
- White
- Surface Mount
- Round
- Submersible Lights
- Optronics
- 2-1/8L x 1-3/8W Inch
Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2 - HP92VR
10-3/4" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your ...
Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Backing plates add
Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Backing plates add
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- 72 Inch Long
- 10-3/4 Inch Wide
- Steel
- etrailer
- For Tandem-Axle Trailers
Identification Light Kit for Trailers over 80" Wide - Submersible - 3 LEDs - Red
In Stock
Waterproof identification light kit with (3) 3/4" diameter red LEDs is designed for trailers wider than 80". Supplemental brake function - lights brighten when brake pedal is pressed ...
Features: Trailer light kit functions as an identification light for trailers wider than 80" Supplemental brake function - lights brighten when brake pedal is pressed Black molded wiring harness
Features: Trailer light kit functions as an identification light for trailers wider than 80" Supplemental brake function - lights brighten when brake pedal is pressed Black molded wiring harness
- Clearance Lights
- Rear Clearance
- Red
- Recessed Mount
- ID Bar
- Round
- Submersible Lights
- Optronics
- 3/4 Inch Diameter
Grease Seal SL226 - SL226
In Stock
- Seals
- Grease Seals - Single Lip
- 3.066 Inch O.D.
- 2.250 Inch I.D.
- Redline
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
In Stock
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket ...
Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light
Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Red
- Surface Mount
- Square
- Kit
- Submersible Lights
- Optronics
- 5L x 5W Inch
Replacement Trailer Hub Bearing - 25580
In Stock
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
- Bearings
- Standard Bearings
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- 1.750 Inch I.D.
- Bearing 25580
- etrailer
- Race 25520
Peterson Light Kit for Trailers Under 80" Wide - 20' Harness - Driver and Passenger
In Stock
4-3/4" x 4-1/2" Square. Incandescent trailer light kit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount ...
Features: Trailer light kit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex
Features: Trailer light kit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex
- Tail Lights
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Red
- Surface Mount
- Kit
- Peterson
- 4-3/4L x 4-1/2W Inch
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL - GS-2250DL
In Stock
Trailer Hub Grease Seal better protection against moisture and impurities than its single lip counterpart and improves retention of grease inside your trailer hubs. GS2250DL Double Lip Grease Seal - Replaces Single Seal 42385
- Seals
- Grease Seals - Double Lip
- 3.376 Inch O.D.
- 2.250 Inch I.D.
- TruRyde
Mini LED Identification Light Kit for Trailers - Submersible - Red LEDs - Clear Lens
In Stock
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets ...
Features: Trailer light kit functions as rear identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements
Features: Trailer light kit functions as rear identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements
- Clearance Lights
- Rear Clearance
- Red
- Recessed Mount
- ID Bar
- Round
- Submersible Lights
- Optronics
- 3/4 Inch Diameter