Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2

etrailer Trailer Fenders - HP82VR

9" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your trailer.

Features:

• Straight fenders cover 2 tires on each side of your tandem-axle trailer
  • Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
• Welded backing plates add extra protection for the sides of your trailer
  • Close fit keeps dirt from building up between the fenders and trailer
• 1" Wide outer edge is rounded
• Sturdy, 16-gauge steel construction
  • Prime and paint the fenders to get corrosion protection and to match your trailer's finish
• Sleek design offers a clean, stylish look
• Weld-on or bolt-on installation
  • Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation
• Made in the USA

Specs:

• Application: tandem-axle trailers
• Dimensions: 72" long x 9" wide x 20-1/2" tall
• Quantity: 2 fenders
• Weight: 15 lbs each
• 1-Year limited warranty

Note: Do not use the backing plate to mount the fender to your trailer.

Tips for Replacing and Installing Trailer Fenders

• Do your best to match the dimensions of the new fender to your old one.
  • If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
• As with all trailer maintenance, don't forget to chock your wheels before getting started.
• For a bolt-on fender, use your existing mounting hardware, if possible.
  • The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
• If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
• Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
• Before you start drilling, position the fender where you need it and center it over your wheel well.
  • Mark where you need to drill (measure twice, drill once).
• Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.

MFS00046 Tandem Axle Trailer Fender w/ Backing Plate - Steel - 9" x 72" x 20-1/2" - Quantity 2