Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…
Hey Jeff, we can definitely help but the pins that go into the breakaway switch are not all universal and unless you know what brand it is the best solution is to just replace the entire switch like with the part #420000 as this approach is universal…
Hey Walker, thanks for reaching out, and thanks for the pictures. We do have a bearing for the TJD-7000 jack part #TJD-7000-BR but its a 0.75" ID/ 1.519" OD so it sounds like this won't match up with your jack. Without knowing the brand…
Not, to those specifications Rob. Our fenders like the item #TD86VR are all generic replacements as well. We don't have a set with 30" mounting bracket spacing. The Tie-Down item #TD86VR attaches with universal weld on brackets and…
Hey Morgan, the best hitch for what you are looking for would be the Curt #C67JR which has the easiest install and the highest tongue weight rating. The hitch does fit right up under the rear bumper which will slightly reduce ground clearance but it…
Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…
It definitely is Landon! The Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire item #KE94WV is a load range D tire that will work great on the highway for a long trip. It has a 2,200 lbs capacity per tire and a maximum speed 87 mph. The 15"…
Hey Nelson, welcome back and congrats on your new SUV! We get our information directly from Curt and their item #C13409 and item #C47HR hitches fit all models of the 2025 Subaru Forester including the hybrids. This is why we don't list a hybrid…
Hi Steven; I believe there was a change in the wiring for the 2026 model that doesn't allow the previous custom wiring to cross over. I'm sure Curt is working on a new wiring harness but we don't have an ETA on when that might be…
Hi Michael! Do you already have a 7-way on your Transit? If you don't have wiring, you need to start by adding a 4-way with #C56327 (single rear wheel) or #C42MJ (dually). Once you have your 4-way installed you can upgrade it to a 7-way using the…
Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…
Hi Joe; what you're looking for is a 3,500 lb axle with a 77-1/2" hub face measurement (this is considered the length) and a 59-1/2" spring seat measurement. We don't have a standard axle that matches so I can only offer the…
Filters
