Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The correct replacement tire for a 20.2 x 8.0 - 10 is going to be the Loadstar K399 Bias Trailer Tire item #AM1HP56. This is a load range E tire that has a capacity of 1,650 lbs at 90 psi each. It has a speed rating of N which tops out at 87 mph. If…
view full answer...The tread depth on the Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Mini Mod Wheel - 5 on 4-1/2 - Load Range D #AM31991 you were looking at is 1/4".
view full answer...By looking at the photo you provided, I can see that you do indeed have a clearance problem with the fender. Going to a 13 inch wheel/tire combo like the Kenda Wheel/Tire Combo part #AM31990 for a black mod wheel or #AM31991 for a white mod wheel…
view full answer...Yes, as long as the spare tire is the same size, load range (weight rating) and has the matching wheel bolt pattern you can use a bias ply spare to replace a radial main tire for the short distance you'll travel to get the radial repaired or…
view full answer...According to MORryde the AllTrek 4000 #MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of 15"…
view full answer...There is a quality difference between the Taskmaster Provider tire #TTWTRTM2358016E and the Taskmaster Contender, #C23516E. The biggest difference is in the tread. The Provider just has better tread. The Contender was meant as a less expensive radial…
view full answer...Your StarCraft trailer would have to be overloaded and/or you would have to hit a pretty severe bump for the leaf springs to deflect beyond what they are designed for. SInce there is a chance this could happen, albeit a small one, having some extra…
view full answer...To install Timbren helper springs #TTRA1032 the included bolt will need to be tack welded to the top plate, the top plate then gets welded to the bottom of the frame above the leaf spring stack. The 3 lower brackets will need to be welded together to…
view full answer...Yes, the DeeMaxx Trailer Wheel Lug Nut #DE65GR is strong enough to be used with an RV that has axles with a higher weight capacity.
view full answer...The Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles, #DX73QR is 26-5/8" long overall and to the center of bolt is 11-1/2".
view full answer...Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
view full answer...The tire size ST225/75R15 is designed to fit 15 inch diameter wheels with a 6-7-1/2 inch width. The part #AM20534 that you referenced is a 15 inch wheel with a 6 inch width so in that regard it would work well. The bolt pattern of this wheel is 6 on…
view full answer...Filter Your Search
Contact and Help