Result: Trailer Axles

Hey Jeffrey. Sweet, you have a Lippert 3,500lb axle. It looks like this axle already has a brake mounting flange installed. This is going to allow you to add all the braking components without replacing the axle. The parts you're going to need in…

Hey Jason, thanks for reaching out. Yes, the etrailer Electric Trailer Jack #e55ZV is a great fit for your 2022 Cruiser MPG. Your trailer uses a standard A-frame tongue, and the #e55ZV is designed to mount directly in place of the factory jack, so…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Happy to help Nick, thanks for reaching out! The Kenda Karrier ST205/75R15 KR53 Radial Trailer Tire #KE85TJ has a speed rating of 87 mph, speed symbol N is stamped on the side wall of the tire. This is a Load Range D tire with a maximum load capacity…

Hi, Yes, it is possible to add hydraulic disc brakes to a trailer that currently has no brakes, but there are a few things we'll need to confirm first. Since you'll be towing in the mountains, I think hydraulic disc brakes are a great choice…

Hey Dan! What you have there is a 3,500 lb Lippert axle that is 86" long. If your leaf spring run under the axle you need #LC73PK and if they sit on top of the axle (overslung) #LC33PK. This matches the capacity, length, and spring center…

Hey Kevin, welcome back! It is possible to use an 8,000 lb spring on a 7,000 lb axle, but this wouldn't necessarily increase the weight capacity of the trailer. The springs may be rated for 8K, but things like the axles, brakes, hubs, trailer…

Hey Liam. All of our 10" brake assemblies like item #23-454-455 have a 4-bolt brake mounting flange. The Trailer Hub and Drum Assembly item #8-407-5UC3-EZ you were looking at is not available in a 12" drum. We do not have a 12" braking…

Thank you so much for the detailed information Doug! The Lippert Beam-Only Trailer Axle item #LC63PK is exactly what you need. This axle matches your specifications perfectly; 86.5" hub face, 68.5" spring center, and designed to replace…

Hey Tilo! The CE Smith Trailer Idler Hub Assembly #CE13515 from your order uses a lithium complex grease like LubriMatic LMX Industrial Strength Grease #L11390. When you're maintaining your hubs, you can use the chart below to see which grease…

Hi Donald! Yes, the B&W Companion OEM 5th Wheel Trailer Hitch w Slider #BWRVK3370 will fit the puck system in your 2012 Ford F-250. This is specifically designed for the Ford OEM prep package. The slider is the right choice for the short bed…

Hey Dave, thanks for reaching out. Our etrailer brand axles are made by a company called AxleTek. They make a lot of OEM and aftermarket parts for trailers. The main difference between those and the Dexter are the Dexter axles are made here in the…