Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to 14" Wheels - Qty 1
(2295 reviews)
Price: $30.20
In Stock
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to 14" Wheels - Qty 1
Item # HP37FR
Our Price: $30.20
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2295)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Fenders - HP37FR
- 13 Inch Wheels
- 14 Inch Wheels
- For Single-Axle Trailers
- Steel
- 28 Inch Long
- Bolt-On
- Weld-On
- 7-3/4 Inch Wide
- No Step
- etrailer
7-3/4" Wide x 28" long x 10" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, ribbed steel is built to last. Bolt or weld onto your trailer.
Features:
- Rounded fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
- Close fit keeps dirt from building up between the fender and trailer
- 1" Wide outer edge is rounded
- Ribbed, 16-gauge, cold-rolled steel is tough and sturdy
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 13" to 14" diameter wheels
- Dimensions: 28" long x 7-3/4" wide x 10" tall
- Quantity: 1 fender
- Weight: 6 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFS00492 Single Axle Trailer Fender - 90-Degree Back - Cold Rolled Steel with Ribs - 13" to 14" Wheels - Quantity 1
Video of Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to 14" Wheels - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Trailer Fenders - Single Axle Fender - HP37FR
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this etrailer single axle steel trailer fender with the ribs for 13-inch to 14-inch wheels. It is for a quantity of one fender. Now, this rounded fender will cover one tire on your single axle trailer. This will act as a splash guard.
Keeps road debris from hitting other vehicles, and it will also help protect your trailer's cargo. Now, I wanted to show you the outer edge on this if you notice. Has this nice one-inch curve radius lip to it. Gives it a nice finished appearance, and on the inner edge, right back here, it is a 90 degree lip on this inner edge, and that's so it's designed to mount flush to your enclosed trailer.This is a sturdy ribbed, 16-gauge cold rolled steel construction. Nice raw finish.
Can be primed and then paint it to provide even more resistance to corrosion and also to match your trailer's paint finish. If you notice, it has the two ribs on here. These are stiffener ribs. They're designed to help eliminate flexing of the fender. Now, this is a nice weld-on or bolt-on installation.
It is not pre-drilled, and the mounting brackets for bolt-on installation are sold separately.This part is made in the USA. Again, the specs on this. It's for a quantity of one fender. It is for a single axle trailer with 13-inch to 14-inch diameter wheels. The weight on this fender is only about six pounds.
And the last thing I do is just to give you some measurements on this. We're going to measure the length from here to here. If we put our ruler on there, it's going to be right at 28 inches long. Overall height from the bottom to the very top is right at 10 inches tall, and the width on it is right at seven and three quarter inches wide. That should do it for the review on this etrailer single axle steel trailer fender with the ribs for 13-inch to 14-inch wheels for a quantity of one.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to 14" Wheels - Qty 1 - HP37FR
Average Customer Rating: 4.8 out of 5 stars (2295 Customer Reviews)
7-3/4" Wide x 28" long x 10" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, ribbed steel is built to last. Bolt or weld onto your trailer.by: Neil06/03/2022
It is exactly as described except for the ends which both have a slight bow in them. I am not using this for a trailer and need the shape and size as close to perfect as possible. Hopefully my straightening skills will be up to par. Every other part of this transaction was excellent.
by: Darryl 07/08/2023
Actually I ended up not using these so probably not fair for me to rate them.
The other stuff I ordered is fine though. I don’t use the trailer very often, but when I do I’m pretty confident everything will be fine.
by: William09/22/2022
Shipping was quick and informative the entire time.
Fenders are what I expected. I have not had time to install them yet but don't foresee having any issues.
by: Timothy S07/12/2022
Fenders are as advertised, hopefully I can adapt them to my trailer. They are well made.
by: John 11/29/2022
Was easy good price installed like a ch arm!
by: David10/06/2021
Got 5 what I order 1 of something else only use 4 so got 2 can’t use that money spent you can’t get back customer waiting on product can’t build just 2 have to find some more fenders some else
by: Darryl 10/05/2020
This company has it nailed when it comes to customer contact. My product arrived in half the time promised and I was kept aware of status constantly. I will definitely use them again!
by: Curtis 06/21/2023
by: Johnny 12/06/2021
Fenders are very good for the use I nee d.
by: Ricky C10/20/2020
Great product.
by: Leroy09/23/2023
by: Ronald 08/11/2021
Very sturdy,well made
by: Jose 12/01/2021
by: Glen 07/30/2021
Very good
by: Robert 03/06/2023
by: Rahab11/15/2022
by: Mark 10/08/2021
by: Vermount10/08/2022
by: Ron03/12/2022
by: Luz02/12/2021
by: Thomas 06/19/2021
by: Christopher 02/12/2021
by: Donald05/29/2023
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
by: Ryan R08/02/2023
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
by: Matthew10/27/2023
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
25
2288
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Is Backing Plate on Single Axle Trailer for 13" to 14" Wheels Tack Welded Into PlaceThe Single Axle Trailer Fender w/ Backing Plate # HP97FR has the backing plate tack-welded to it. If you'd rather add your own backing plate then you'll want to go with the Single Axle Trailer Fender for Enclosed Trailer # HP37FR which is the exact same thing, just without the backing plate.
view full answer... - Can I Swap The 12" Wheels On The CE Smith Multi Sport Trailer CE48870 To 13" Wheels?Though it is possible to upgrade the wheels on the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870 to a 13" option, like the Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel # AM31994, it will have to be a separate purchase and cannot be swapped out by us. This is kitted together from CE Smith and isn't something we can change parts on, unfortunately. I do also have to mention that going with a larger tire/wheel will require a few things to be done. First,...
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
10/15/2021
Thank you for leaving a review and bringing this to our attention. Our customer service team should be reaching out to you in the near future.