Product Experts Available Now!
Call 1-800-940-8924
Replacement Single Axle Trailer Fender for EZ Loader Boat Trailers - Aluminum - Qty 1
(21 reviews)
Price: $59.44
In Stock
etrailer
Replacement Single Axle Trailer Fender for EZ Loader Boat Trailers - Aluminum - Qty 1
Part Number: HP83VR
In Stock
$59.44
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (21)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Fenders - HP83VR
- For Single-Axle Trailers
- Aluminum
- 27 Inch Long
- 9 Inch Wide
- Bolt-On
- Diamond Plate
- No Step
- etrailer
9" Wide x 27" long x 11-1/2" tall. Excellent for your EZ Loader boat trailer, this diamond plate aluminum trailer fender can stand up to rust and corrosion while you're on the road. Slanted back provides extra clearance for boat.
Features:
- Fender covers 1 tire of your single-axle EZ Loader boat trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Inner edge tilts away from your trailer to provide extra clearance for your boat
- 1" Wide outer edge is rounded
- Rustproof, corrosion-resistant aluminum construction
- .063 Aluminum diamond plate is stylish and rugged
- Bolt-on installation
- Mounting brackets sold separately
- Made in the USA
Specs:
- Application: single-axle EZ Loader boat trailers
- Dimensions: 27" long x 9" wide x 11-1/2" tall
- Quantity: 1 fender
- Weight: 2.5 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
Rustproof Aluminum Construction
Aluminum offers excellent, long-term defense against rust and corrosion. It is naturally rustproof, unlike steel, which must be treated with a rust-resistant coating that can break down over time. Aluminum is lightweight yet durable, making it suitable for heavy-duty, outdoor, and saltwater applications.
MFT00202 Single Axle Trailer Fender - Tapered Back - Aluminum Tread Plate - Quantity 1
Video of Replacement Single Axle Trailer Fender for EZ Loader Boat Trailers - Aluminum - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Breaking Down the Replacement Single Axle Trailer Fender for EZ Loader Boat Trailers
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this replacement single axle trailer fender for your EZ Loader Boat Trailers. This fender is going to cover one tire on either the left hand or right hand side of your single axle EZ Loader Boat Trailer. And as you no doubt know, this fender's gonna do a great job of blocking road debris from hitting other vehicles and help protect your trailer's cargo. Now, this inner edge, as you can see, is going to tilt away from your trailer to provide extra clearance for your boat. And again, you're gonna be able to mount this on either the left hand or the right hand side of your trailer. And the one inch wide outer edge is rounded, as you can see there.
And this fender is made here in the USA of a rustproof corrosion resistant aluminum construction. It features a 0.063 aluminum diamond plate that is stylish and rugged as well. And this is going to be a bolt-on installation. The mounting brackets are sold separately. Usually you will wanna use your existing mounting hardware if possible.
Now, let me go ahead and give you some overall measurements, so you can be confident that this is going to work for you. So, beginning with the overall length, and I'm gonna line this up here from end-to-end. As you can see, we are sitting right at 27 inches long. And then, give me my ruler here for some of these smaller measurements. Looking at the widest point, I'm gonna come over there and line my ruler up.
As you can see, we are sitting right at, line that up a little better for you. We're sitting right about nine inches wide at the widest point at the bottom. And then, at the top it tapers a little, it becomes a little more narrower, more at the closer to the top that you get, we're sitting right at about seven and three quarters inches wide. And then looking at the overall height, I'm gonna get my tape measure here. We're sitting right at, right about 11 and a half inches tall.
Now, I weighed this fender earlier before our time together and this weighs almost two and a half pounds. So, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- etrailer mistake
Ratings & Reviews
4.8
21 reviews
by:
Rafel
04/29/2026
Love the replacement fenders. I installed larger tires and wheels on my boat trailer and needed larger fenders to cover them. These fit great and look awesome. They look very well made and look like they will hold up good. I will be ordering up some others for a small tandem axle trailer when I get the tires figured out.
by:
JPD
02/12/2024
These fenders were perfect for the job; much sturdier than the plastic fenders they replaced. I painted then to match other parts on the trailer I was up-grading to transport a boat I built.
by:
Randy
06/08/2026
Awesome product. Looks amazing on my trailer. The customer service experience was like no other. It felt like family.
by:
Talbot
05/14/2025
What I expected.
by:
Scott
02/09/2024
Very descriptive on what you're getting and it arrived really fast. I haven't installed them yet,but have verified they are the correct fenders. Thank you!!
by:
Gary
06/02/2023
the fenders did the job
by:
Paul
07/24/2024
by:
Isaac
05/08/2024
by:
Mark
03/13/2024
by:
Triston
06/18/2024
by:
Karen
05/26/2023
by:
Steven
11/24/2025
Very good service
by:
Scott
05/11/2023
Very pleased with the fenders and how well they were packed. No shipping damage which was originally a concern. These fenders had no pre-drilled holes which is what I preferred. Overall, very pleased with the product and always pleased with etrailer!
by:
Hammerhead
07/05/2024
Fenders look good. Couldnt find the tapered boat trailers but etrailerhad them. Paid for 2 day shipping but arrived in 6 days.
by:
Jack
06/20/2024
Jack
6/21/2025
Excellent product. I would buy them again.
by:
Thomas
03/20/2026
by:
Jim
10/26/2023
Just got here...quick delivery! Thank you
by:
Joe
11/20/2025
by:
Ed
06/10/2025
by:
Jeff
04/07/2024
by:
Steve
10/26/2023
21
21
true
See what our Experts say about this etrailer Trailer Fenders
- Option For Replacing Fender On Chrysler Single Axle Boat TrailerHey Thad, thanks for reaching out. We do carry a fender that may work for you, but I am sorry to say that we do not have anything with the exact same dimension as your current fender. We offer only a few jeep-style fenders and none of them are really anywhere close to the size you need. The # HP99VR you were looking at would be the closest thing and it measures 24" long 8" wide and 8" tall. If you are ok with going away from the jeep-style fenders, one pretty close option is the Single...
view full answer...
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Carrie F
Installed by:
Andy C
Written by:
Sabrina W
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Claire H.
6/10/2026
Thanks so much for the awesome review! We're glad to hear the product looks great on your trailer and that you're happy with it. It really means a lot to hear that our customer service felt like family—that's exactly the kind of experience we hope to provide. Thanks for choosing etrailer and for taking the time to share your feedback. Enjoy your new setup!