Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...The B and W Companion hitch part #BWRVK3370 that you referenced does not come assembled. The head will come in one box, and the slider setup will be separated out into two more boxes. I attached a link to the install instructions for you to check…
view full answer...You will need to get the other bearing number from inside your current hubs before we can pick you out replacement hubs. Most likely the outer bearing you pulled is a LM67048 and the inner you have is a 25580 which would mean that the #8-201-5UC3…
view full answer...A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…
view full answer...The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…
view full answer...Thanks for reaching out, Roy! The term "best" can be a little subjective since everyone has their own experiences and needs/wants, but in regards to which bike rack has the best features it is the Thule Epos Bike Rack #TH99XE hands-down…
view full answer...Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…
view full answer...Hey Richard; that's a good question and I think between the two, the best option for use with your Blue Ox tow bar is definitely the Roadmaster option: - Roadmaster Tow Defender #RM-4750 There are a couple reasons I like the Tow Defender #RM-4750…
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…
view full answer...To install a Curt TriFlex NEXT Trailer Brake Controller #C24VV on your 2024 Hyundai Santa Cruz you will need the Curt Custom Wiring Adapter #C77BR. This will provide you with a plug and play connection as long as you have the factory 7-Way #C68JR.
view full answer...To make a 7-way to 6-way square adapter will require you to get the part #37995 to use the 6-way end and then wire up a 7-way to it like part #H20043. This will give you the adapter you would need since there isn't one already pre-made.
view full answer...Related Searches
Filter Your Search
Contact and Help