See what our Experts say about this etrailer Hitch Adapters

• Can Blue Ox TrackPro Weight Distribution Saely Be Used with Longer Shank to Clear Tailgate
  Yes, you can use the Blue Ox TrackPro Weight Distribution # BLU36FR with an extended shank, and for that I recommend the Equal-i-zer Weight Dist Shank # EQ90-02-4600 which measures 14" from the center of the hitch pin hole out to the adjustment holes for the ball mount section. Using a standard extended shank will be just fine and won't have any positive or negative effects on this system. The only time using an extender is an issue is if you add a standalone extender like the 18" Long...
  view full answer...
• Camper Tie-Downs, Steps, and Hitch for 2006 GMC Sierra 2500
  Alright so I still don't know if you have no hitch, a factory hitch, or an aftermarket hitch. An extended hitch isn't really a thing but there are extenders that can be added to your existing hitch. I'll cover both possibilities just to be sure. If you have the factory hitch you need the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL86FV. If you have an aftermarket hitch you need the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL99NR. You will also need turnbuckles...
  view full answer...
• 24" Extension Fabrication Piece for a 2" Hitch Receiver
  Hey Adam, thanks for reaching out! It sounds like you're either looking for a 24" fabrication part like the Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver # 337RT25824B, or an extender piece like the 18" Extender # e48YR. If you need the latter in a 24" length then you'll need to fabricate that because the only ones longer than this 18" extension are specialized ones for a dual receiver setup.
  view full answer...
• Looking For 32" Hitch Extension For A 2" Receiver
  Hello Sallie. The longest extension we offer for a standard 2" hitch is the Trailer Hitch Extender # e48YR which is 18" long. The thing to keep in mind is that using this kind of extension decreases the carrying capacity of your hitch by 50%. Depending on the weight of your bike rack and your bikes this may not be a practical solution. We do offer a 32" extension, the TorkLift SuperTruss Hitch Extension # TLE1532, but this can only be used with the TorkLift SuperHitch Trailer Hitch Receivers....
  view full answer...
• Options For Pulling a Boat Trailer Behind a 2014 Dodge Ram 3500 with an In-Bed Truck Camper
  The longest extension available that will work with the factory trailer hitch receiver on your 2014 Dodge Ram 3500 is the Trailer Hitch Extender # e48YR. You will need to measure from the center of the hitch pin hole on your trailer hitch receiver to the edge of your truck bed camper to see if this extension is long enough. Keep in mind that a hitch extender like the # e48YR will reduce your trailer hitch receivers capacities by 50%, and has a max tongue weight rating of 350lbs and a max...
  view full answer...
• Can Hitch Extender be Used with Dual Hitch Adapter
  Because there isn't tongue weight like you mentioned you can use a hitch extension like the # e48YR with your dual hitch adapter so that you have the needed clearance.
  view full answer...
• Do Cargo Carriers Have Max 350 lb Weight Capacity When Used With Hitch Extender
  A hitch extender will not reduce the capacity of a cargo carrier itself, though most extenders do have a max 350 lb tongue weight limit, such as the Trailer Hitch Extender for 2" Hitch Receivers - 18" Long # e48YR. That said, extenders like # e48YR also reduce the tongue weight capacity of your hitch by 50 percent, so you have to go with whatever is lower - 350 lbs or half your hitch tongue weight capacity. For example, if your hitch had a 500 lb tongue weight capacity and you used the...
  view full answer...
• Can A Hitch Extender Be Used With A Lock N Roll Articulating Hitch
  Yes, you could use the Trailer Hitch Extender for 2" Hitch Receivers # e48YR with a Lock N Roll Articulating Hitch like part # 336VS503505, but you'll be reducing the capacity of your vehicle's trailer hitch by 50%. If the trailer hitch is rated for 5,000lbs then you'd still have enough capacity for your 2,300lb trailer.
  view full answer...
• Can I Use An Extender For A 2-1/2" Hitch In A 2" Hitch?
  I do have some potential solutions for you, but we are not aware of any kind of adapter that would go from a 2" hitch to a 2-1/2" hitch. An adapter like that would cause a lot of folks to overload their 2" hitches. The 2" hitches are only rated for so much weight. Also keep in mind that the use of a hitch adapter/extender will effectively decrease your tongue weight capacity by half. Using an adapter plus an extension would drastically decrease your towing capacity, and this would not be...
  view full answer...
• Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
  We do offer hitch extenders which can be used for towing but the big thing to keep in mind when using such adapters is capacity, as they reduce this by 50%. The longest extender we offer for standard applications is 18" like the Trailer Hitch Extender for 2" Hitch Receivers part # e48YR. The capacity of the adapter is 3,500 lbs or 50% of the hitch's weight capacity, whichever is lower.
  view full answer...
• Can the Yakima EXO Swing Away Carrier Be Used On A 2017 Ford F-350 With an In-Bed Camper?
  The Yakima EXO Swing Away Storage System w/ Enclosed Cargo Carrier and Cargo Carrier # Y44ZR is not actually meant to be used with any type of hitch extender or adapter so with your truck having a hitch extender, it's not going to be recommended that you use this as is. That said, seeing as though you're still going to need to use some type of an extension, the Yakima StraightShot Hitch Extension # Y69VR has been approved and will work great with the EXO Swing Away # Y44ZR. If that is...
  view full answer...
• Hitch Extension for Towing Trailer Below a Cargo Carrier With Gen-Y Stacked Receivers
  Our Trailer Hitch Extender # e48YR will extend out your 2" ball mount 18". This extension is rated for a trailer up to 3,500lbs with a tongue weight up to 350lbs. Do note the extender will require you to reduce your tongue weight capacity by 50%. So if your current receiver is rated for 6,000lbs or more you will be within range for your 3,000lb trailer.
  view full answer...
• What Do I Need To Carry 2 E-bikes 70lbs Behind My Truck With A Truck Bed Camper?
  Hey Deb, The bike rack and swivel hitch you mentioned, # S86SR and # HLY84FR, are great options for what you are trying to do. The bike rack is going to have plenty of capacity for your bikes. The TorkLift # TLE1536 is a hitch extender that requires the TorkLift Superhitch to attach to. It needs a dual receiver hitch to install so a regular factory 2" hitch will not work with this hitch extension. The longest extender that we have for a normal 2" receiver is the 18" # e48YR. This is...
  view full answer...
• Hitch Extension that Could be Used with Thule EasyFold XT Bike Rack
  From the center of the hitch pin of the Thule EasyFold XT part # TH903202 to the nearest upright portion of the rack is 8 inches so to determine how much of an extension you may need you would need to measure from the center of your hitch pin out to the furthest point out on the rear spare and compare that to the 8 inch measurement I mentioned. Most likely an 8 inch extension like the part # C45791 would work well for you. If you needed something longer we have the # e48YR which is 18...
  view full answer...
• What Hitch Extension Is Needed For Carrying E-Bikes Behind a 2023 Ford Bronco On 1Up Bike Carrier?
  Using a 18" Extension # e48YR is most likely going to extend the bike rack much further than what you are needing. If your 2023 Ford Bronco does not come with a receiver we do have the Draw-Tite # DT37GR which is specifically designed longer. This will place the hitch pin center hole 3-1/2" behind the rear bumper which better allows for hitch mounted accessories to clear the rear tire. A Curt Receiver # C76WR which is more like the factory option places the hitch pin hole 3" in on the rear...
  view full answer...
• Longest Hitch Extender for a 2" Hitch
  Hey Heidi! The longest hitch extender I have for a 2" hitch is going to be the 18" long item # e48YR. You can add the 15-3/4" Long Hidden Hitch Ball Mount item # 80232 to get to 33-3/4". If you go this route you'll need a Hitch Pin and Clip item # 37201074 and a hitch ball item # A-90 for a 2" or item # C40002 for a 1-7/8". Please note a hitch extender like item # e48YR is going to reduce your hitch's towing capacity by 50%.
  view full answer...
• Looking For 2" Hitch Extender Rated For 6,000 lbs Towing OR 1,000 lbs Tongue Weight
  Hello Francis, thanks for reaching out. That is a pretty tall order. The strongest hitch extensions we offer are the TorkLift SuperTruss Hitch Extensions like part # TLE1548 (10,000 lbs towing 500 lbs tongue weight). These can only be used with a TorkLift SuperHitch trailer hitch with stacked 2" receivers. So you would need to install a new trailer hitch on your truck. If you can tell me the year, make and model of your truck I can see what we have available for you. We do have a 14"...
  view full answer...
• Looking For 36" Hitch Extension For 2008 Ford F350
  Hello John, thanks for reaching out. Do you have a 2" receiver on your Ford? if so, the longest extension we have for a 2" hitch is the Trailer Hitch Extender # e48YR which is 18" long. The only way to use a longer 36" extender is to replace your trailer hitch with the TorkLift SuperHitch # TLF1002 and use the TorkLift SuperTruss Hitch Extension # TLE1536. I know this setup is a bit expensive, but it will be the only way to safely use a 36" extension. If you have a 2-1/2" receiver on...
  view full answer...
• Shortest Extension For TorkLift SuperHitch Magnum Trailer Hitch
  Hi Marty; while we do have an extension for your TorkLift SuperHitch Magnum, the shortest extension made by TorkLift for the SuperHitch is a 21 inch extension: - TorkLift SuperTruss Hitch Extension - 21" Long # TLE1521 If you just want a standard 18 inch extension that fits in the 2 inch receiver of your TorkLift you can use part # e48YR, but it only has a 3,500 lb towing/350 lb tongue weight capacity compared to the SuperTruss having a 7,500 lb towing/750 lb tongue weight capacity and...
  view full answer...
• Availability Of 48" Extension For 2" Hitch
  Hello Vasiliy, thanks for reaching out. It sounds like you are looking for a 48" long extension for a 2" hitch receiver. If so, I am sorry to say that we do not offer an extension that long. We have extensions for 2" hitches, but the longest we offer would be an 18" extension like part # e48YR. The only way to get a longer extension would be to swap out the trailer hitch on your truck for a TorkLift SuperHitch. This would allow you to use the 48" extension part # TLE1548. This does not...
  view full answer...
• Will etrailer Hitch Extension e48YR Work with Blue Ox Tow Bar
  Hey Mark, yes you can use the hitch extender part # e48YR with a tow bar setup like your Blue Ox.
  view full answer...
• Availability of 2" Receiver Extension for Hitch and Yakima Hanging Bike Rack
  Hi Rick; are you looking for some kind of 2" hitch extension like # e48YR? The 2" shank on the bike rack will fit the 2" receiver on your trailer hitch. I'm not sure what else you might mean by an 11/16 piece of piping. If you could give me a little more information or clarify I would be happy to help just reply below.
  view full answer...
• Solution For Temporarily Extending Trailer Tonge Depending On Boat Ramp Conditions
  Hello Adam, thanks for reaching out. That is an interesting idea, but I am not aware of any product that would attach to the trailer to intermittently extend the tongue. Your best bet for that would be to use an extended ball mount like part # 80232, or to use a hitch extension like part # e48YR. Aside from that, the only other solution would be to permanently extend the trailer tongue. Just keep in mind if you do tow with an hitch extender, your hitches towing capacity will be reduced...
  view full answer...

Do you have a question about this Hitch Adapter?