Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
view full answer...The serial number and VIN are typically printed on a label or plate placed somewhere on the trailer's pole tongue, although it could possibly found elsewhere on the trailer frame, possibly on the inside edge of the frame so…
view full answer...The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000…
view full answer...To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of…
view full answer...The #37213635 JR Products Replacement Landing Gear Switch you'd mentioned would be a proper replacement for your existing Atwood 70254 landing gear switch. If you wanted the switch, wiring harness and the bezel for the switch, use the…
view full answer...The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the…
view full answer...The best option we have to replace the AV615BHM is the Furrion RV Stereo #DV1230BL. This is also a double din stereo with a DVD player and Bluetooth connectivity; just keep in mind it does require a cutout of 6-15/16" wide x…
view full answer...To make a 7-way to 6-way square adapter will require you to get the part #37995 to use the 6-way end and then wire up a 7-way to it like part #H20043. This will give you the adapter you would need since there isn't one already pre-made.
view full answer...When installing the WeatherTech Side Window Air Deflectors #WT82476, there is no adhesive strips used on the front deflectors. I have attached a link to an installation video for the deflectors on a 2015 Grand Caravan and as you can see in the…
view full answer...It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…
view full answer...The Curt Custom 5th Wheel Install Kit part #C16443-204 which is a fit for your 2003 Ford F-250/F-350 will use three bolts to secure the base rail to the frame bracket and one bolt to secure the base rail to the bed floor on each side. Therefore,…
view full answer...Filter Your Search
Contact and Help