Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1
(1675 reviews)
Price: $83.41
In Stock
Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1
Item # HP76VR
Our Price: $83.41
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (1675)
- Q & A (0)
- Photos
- Why etrailer?
etrailer Trailer Fenders - HP76VR
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- For Single-Axle Trailers
- Bolt-On
- Weld-On
- Steel
- 36 Inch Long
- No Step
- 10 Inch Wide
- etrailer
10" Wide x 36" long x 19-1/4" tall. This Jeep-style trailer fender gives your trailer a rugged look. Sturdy, 16-gauge steel easily blocks road debris. Bolt or weld onto your trailer.
Features:
- Jeep-style fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps to protect your trailer's cargo
- Classic Jeep design offers a rugged look for your trailer
- Sturdy, 16-gauge, cold-rolled steel construction
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 13" to 15" diameter wheels
- Dimensions: 36" long x 10" wide x 19-1/4" tall
- Quantity: 1 fender
- Weight: 12 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFJ00010 Single Axle Jeep-Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Quantity 1
Replaces J101936
Customer Reviews
Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1 - HP76VR
Average Customer Rating: 4.8 out of 5 stars (1675 Customer Reviews)
10" Wide x 36" long x 19-1/4" tall. This Jeep-style trailer fender gives your trailer a rugged look. Sturdy, 16-gauge steel easily blocks road debris. Bolt or weld onto your trailer.by: John08/11/2022
It took forever to get the parts I had ordered. And after speaking with someone to ensure the parts would match, I still received spindles and hubs that would not fit. I tried to call and email and got no response.
by: John05/27/2022
Luv it jus hook it up n drills n getting it ready getting it rubberized undercoating n hit the water soon thanx etrailer can't ask for to much perfect product would order more for the feature...
by: Dagweed 08/17/2017
These are what I needed to finish off my trailer after I upgraded to 15" wheels, & of course I wanted to match my Jeep. Very pleased..ordered tail lights at the same time!!
by: Brian08/31/2020
Arrived sooner than expected. And a perfect match to what was on the trailer originally. We added tires and lug nuts from etailer to complete our refurbished trailer.
by: James 09/24/2022
as advertise
by: JOEY C.09/15/2015
The best customer service providing great products one after the other!
Once I recieved the steel fenders I had them Rhino Lined and they came out great.
by: Steve C12/30/2016
Fenders worked great. I ended up cutting them shorter and painting with bed liner. They look great!
by: Douglas 12/22/2021
Loving it. I primed and painted then mounted with new lite/ signal.
Thx George and have a nice Holiday coming up.
by: Steven 12/03/2021
I was impressed with the communication and customer service. Delivery was on time and good condition. I am confident I will be using etrailer for future service. Thank you team!
by: Mike 07/30/2022
Nice fenders quick delivery
by: Matt Bates08/22/2013
Recently bought a Storm trailer only to find out they went out of business. During my travels I busted the driver side fender and couldn't find one in stock locally anywhere. Hopped on etrailer.com and found exactly what I needed for half the price local stores were offering for the "Wrong" fender. I wasn't in an extreme hurry so I opted for ground shipping (5-7 days) and after shortly after confirming my order I received an email saying they had already processed my order and upgraded me to express shipping (3-7 days). Then out of nowhere a UPS truck pulls up to my house the following day with my fender in hand.
Great work etrailer.com
New loyal customer,
Matthew Bates
by: Justin08/23/2021
etrailer always has the products I need or want. They also do a great job shipping them in a faster time than expected.
by: Bill G.04/21/2014
This fender was all it was advertised as, a quality part, well packaged and delivered very speedily.
I have not had time to install the brake controller but it too was well packaged and shipped promptly. It will just fit into the space that was formerly occupied by indicator panel that is no longer in the dash of my pickup.
Comments
Both the fenders and the brake controller have worked out well. The brakes work exceptionally smooth and I am quite pleased.
Bill G - 04/22/2015by: Glenn02/12/2022
Just what we needed. Thank you for the fast shipping
by: Karl08/14/2018
Nice steel unfinished fender to replace an aluminum fender ripped off my trailer by a tire tread thrown off a tire. As received, light surface rust in a couple of spots, expected on unfinished steel. Well packaged, quick handling and shipment. I also ordered a pair of brackets CE26098G-2, which are very heavy galvanized steel and Classic Accessories tire covers 052963762303, which appear to be very nice vinyl with a three year warranty. There was an issue with my credit card on the order page, quickly taken care of by Amanda in customer service. Now, if someone would just paint and mount the fender, all would be good.
by: Mark A.12/12/2016
Very sturdy fender which I welded onto my trailer. Material is thick enough to easily weld.
Comments
Hello The fenders are nice and strong. I have enjoyed them.
-- 
Mark A - 12/12/2017by: Larry K10/21/2014
I ordered for my trailer because I put new tires and wheels on my trailer that are larger than the fenders on the trailer presently. These fenders were great although I had to cut down some to make it work sijnce they were longer than I needed. These fenders worked great and now my trailer looks good and the size is perfect.
by: James03/08/2018
I am extemely happy with the product and the service from etrailer. I received the fenders on the estimated ship date suggested after typing in my zip code. George comunicated with me throughout the process, thank you. The the fenders are good quality and am using them on a off road trailer for camping. I absolutely recommend and will continue to use etrailer for my future trailer parts.
by: Mike Regner03/23/2017
All items were received within three business days of placing the order and were easily tracked from the tracking site etrailer sent. They were packed well and received in great condition. Thank you for the great customer support and speed of delivery. I will use etrailer for my future needs.
by: Jose04/20/2020
Good product and very fast shipping, dont hesitate to buy from this website, I had a great experience
by: Mark 1843512/29/2015
This is an excellent trailer fender. I looked around at local trailer parts stores and everywhere online. I bought from George at etrailer for these reasons:
--they provided excellent follow-up on the questions I had about the fitment on my trailer
--they showed me which products would fit
--incredible pricing and low shipping
--great post shipping service
They are a great company!
by: Gail H05/14/2017
Fenders look good, no dents or scratches, packaging good enough. Dimensionally correct, as advertised. These have better tire coverage than my OEM square trailer fenders, with longer ends and one inch wider. Rec'd them one day earlier then originally quoted using standard ground shipping, ordered on a Tuesday, at 10:30am and received on Thursday. Shipped out same day I purchased. Well satisfied, recommend etrailer to anyone and will buy from etrailer again.
by: Mark02/05/2019
All the products I have purchased from Etrailer have been good. Quailty, durable products, fast shipping and easy transactions. Etrailer.com has pretty much any product you need for your trailers. Thank you Etrailer!
by: Ricky05/12/2019
Not as nice as they appear on the website. There is distortion at the corners from the bending process. Plus mine came pre dented, the packed mine with a trailer hitch receiver and 3 trailer jacks bouncing around in the same box.
25
1675
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- What are the Dimensions of the Flat Top Portion of the 16-Gauge Steel Jeep Style Trailer FenderThe flat portion of the top measures 8-1/4 inches wide by 15-1/2 inches long. Out side of this area you get into the radiused portions for the lip and the downward bends.
view full answer... - Distance from the Midpoint of Curve to the Bottom of the Legs of a etrailer Trailer Fender # HP76VRI went out into our warehouse and measured an etrailer Trailer Fender # HP76VR and found that from the ground straight up to the midpoint of the radius it measures 17-3/4 inches and measured from where the leg touches the ground to the midpoint of the radius it measures 19 inches. Check out the pictures I attached to see these measurements.
view full answer...
- Can the Jeep Style Single Axle Trailer Fender be Screwed Onto an Enclosed TrailerThe Jeep style Single Axle Trailer Fender, # HP76VR, is designed to be welded on. You might be able to use screws but you would have to use a lot of them all around the back lip of the fender. Since it is designed as a weld-on application I do not recommend using hardware to mount the fender. Welding should be performed by a qualified professional.
view full answer... - Trailer Fender Recommendation for an ATV TrailerThe Single Axle Trailer Fender # HP76VR that you referenced would work well on your ATV trailer, but these do not have a weight rating so I would not recommend you drive your ATV over them. There should be a way to load your ATV's without resorting to driving over the fenders. You might have to load them and then get off the ATV to reposition them by pulling them around.
view full answer...
- Are the Weld-On Redline Fenders GalvanizedThis etrailer Trailer Fender # HP76VR is not galvanized. The reason for that is that these fenders are a weld-on application and it is not recommended you weld galvanized steel for health reasons.
view full answer... - What is the Height of the Lip on Jeep-Style, Single-Axle Trailer Fender HP76VRI went out to the warehouse to measure the fender, # HP76VR The lip on it measures 1-1/8 inches tall and it has a 1/2 inch radius. I included a picture that illustrates the measurement I took for you to view.
view full answer...
- Could etrailer Fender HP76VR be Bolted On Instead of Welded OnThere's not much of a lip to bolt through to attach the Redline fender part # HP76VR but if you wanted to bolt it on instead of weld it on it would work just fine.
view full answer... - Dimensions of the etrailer Steel Trailer Fender # HP76VRI went out in the warehouse and measured the etrailer Steel Trailer Fender, part # HP76VR. If you measured the width of the fender including the radius lip portion of the fender it is 10 inches wide everywhere. It is not narrower at the top. The 8-1/4 inch width is if you just measured the flat portion of the width not including the radius lip. See photo of the fender I am including that will show the measurements on the fender.
view full answer...
- Compatibility of Jeep Style Fender on Tear CamperWe have Jeep style trailer fenders but only for up to 15 inch wheels. We don't have any fenders for 17 inch wheels unless you are referring to the overall diameter of the tire versus the wheel/rim. I haven't seen any tear campers with that size wheel as it isn't even a standard trailer size. I've linked the pages to our tire and fender options to assist. The Single Axle Trailer Fender HP76VR is the longest fender we have in that style and it is 20 inches long and 21 inches tall along...
view full answer...
- Width of Single Axle Jeep Style Trailer Fender HP76VRThe width is 10 inches for the Single Axle Jeep Style Trailer Fender # HP76VR.
view full answer... - 13 inch Wide Trailer Fender RecommendationCheck out the etrailer brand Trailer Fenders part # HP66VR. The dimensions of this fender are 13 inches wide by 36 inches long and 20 inches tall. Its a different shape than the etrailer brand Fender # HP76VR that you referenced but it is very close to the specs that you need.
view full answer... - Dimensions for Portions of etrailer Trailer FendersI went out to the warehouse and pulled the two fenders and took the measurements you requested of each one. The dimensions of the etrailer Trailer Fender # HP99VR from the side starting from the ground straight up to the midpoint of the radius measures 15 inches. The dimension for the top from the midpoint of the radius (both sides) is 7 1/2 inches. The dimensions of the etrailer brand Trailer Fender # HP76VR from the side starting from the ground straight up to the midpoint of the radius...
view full answer...
- Replacement Jeep Style Fender Recommendation For 15 Inch WheelWe offer 2 different Jeep Style fenders that are designed to work with 15 inch wheels. The aluminum fender we carry is the etrailer brand Trailer fender, part # HP96VR. This fender has a 1/2 inch radius lip on both the front and the back of the fender and has an aluminum tread plate design. I have attached an installation video for this fender you can check out. The second jeep Style fender we offer is part # HP76VR. This is a 16 gauge steel fender that is a weld-on application.
view full answer... - 13 Inch Wide Trailer Fender RecommendationThe only 13 inch wide trailer fender we offer is the etrailer brand Trailer Fenders # HP66VR. The flat inside edge of the fender could be used to bolt the fender on. You would need to drill holes in that edge to run nuts and bolts through the fender and the trailer.
view full answer... - Recommended Replacement Trailer Fender for a 2003 Haulmark TrailerYou can certainly email me your photos of your Haulmark trailer's fender to help me determine which replacement would be the best fit. But you will also need to confirm the dimensions of the fender since Haulmark has made many different trailer models over the years and even just within their 2003 model year. Fender specs are not included on their website. In the meantime you can review the linked page to see all of our replacement trailer fenders. You can click on the wheel size first,...
view full answer... - Replacement Fender Options for Haulmark Single Axle FenderI do have an option for you but we only offer universal trailer fenders, nothing specific to any one trailer. The Single Axle Jeep Style Trailer Fender part # HP96VR for diamond plate or part # HP76VR are two suitable options under the jeep style category designed for 13-15" wheels.
view full answer... - Availability of Jeep-Style Trailer Fenders for 255/75 R17 Size TiresWe do offer Jeep-style trailer fenders in a range of sizes, however the largest ones are intended for tires sizes up to 15-inches, such as part # HP96VR. This is an aluminum tread plate design that welds on. We also offer the similar fender # HP76VR. The largest fender we offer is # HP66VR, which is a round profile type for 16- to 16-1/2-inch wheels, also intended for weld-on installation. For reference I have linked you to our main page for all trailer fenders.
view full answer... - Replacement Fender and Clearance Light for Enclosed TrailerYour trailer has Jeep style fenders. For your 14 inch wheels you'll want # HP76VR which measures 10 inches wide by 36 inches long by 19-1/4 inches tall. For sealant I suggest TremPro Silicone # 0160297. It's extremely versatile and can be painted if you desire. I would replace the hardware with exactly what is originally there. I can't see the light you asked about in the picture. If you can provide me with the measurements and a picture I can make a recommendation for a replacement....
view full answer...
- Trailer Fender Recommendation for a 1999 Interstate Enclosed TrailerThe Jeep-Style, Single-Axle Trailer Fender, # HP76VR, can be bolted on to a trailer but you would have to make sure it is secure to the trailer, will not rub the wheels, and is centered. The biggest issue is to make sure it is secure. It will require drilling into both the fender and the trailer as you are aware. It would be best for this fender to be welded on. With an aluminum trailer and steel fender, this will not be feasible, so it would be better to find the best match fender for...
view full answer... - Looking for Aluminum Jeep-Style Fenders for Haulmark TrailerWe do offer Jeep-style fenders. You can see our selection by clicking the provided link. We have two different aluminum tread plate fenders, part # HP49VR, designed for 8-12 inch wheels or part # HP96VR designed for 13-15 inch wheels. We also offer steel Jeep-style fenders, # J10821 for 10 inch wheels, and # HP76VR for 13-15 inch wheels.
view full answer... - Replacement Jeep-Style Fender for a Trailer with 15 Inch WheelsWe have several Jeep-style fenders that will fit 15 inch trailer wheels and that you can bolt on. For plain steel fender you can use # HP76VR. It can be bolted on or welded on. Holes will need to be drilled to bolt it on like your existing fenders. This fender is 10 inches wide 33 inches long and 17 inches tall. We also have # HP96VRwhich is 10 inches wide, 33 inches long, and 17 inches tall. it can be bolted on as well but would require drilling holes. And finally we have a tread plate...
view full answer...
- Jeep Style Trailer Fender Without Tread FinishThe Jeep Style Trailer Fender Trailer Fender # CE18041ATB you referenced is 36" long x 10" wide x 19-1/4" tall. The only other fender we carry that has those dimensions but without the tread is Fender # HP76VR, though it is not aluminum, it is steel and a weld-on application.
view full answer... - Availability of Jeep Style Fender Measuring 10 Inch Wide x 36 Inch Long x 19-1/4 Inch TallThe closest Jeep style fender we are going to have is trailer fender part # HP76VR. This fender is for single-axle trailers with 13" - 15" diameter wheels and measures 10" wide x 36" long x 19-1/4" tall. For an aluminum tread plate fender see # CE18041ATB. I have included a video review of this fender for you to check out.
view full answer... - Replacement Fender for Single Axle Haulmark TrailerI looked up your 2003 Haulmark Trailer and it looks like they typically use the Jeep Style trailer fender. If you have 12 inch wheels then # HP99VR is a steel fender option that could work for you. It will mount using your existing brackets, but if for some reason you need the brackets we offer # CE26061G-2. If you were looking for an aluminum option we offer one in diamond plate in that size # HP49VR. I noticed you were looking at the # HP76VR. This fender accommodates 13 inch to...
view full answer...
Do you have a question about this Trailer Fender?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer fenders for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer fender information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.