How to Determine if HappiJac Qwik-Load Turnbuckles Will Be Short Enough For Frame Mounted Tie-Downs

Question

Question:

2012 FORD F350 SUPER DUTY. i have bed mounted tie downs on this truck. Are the front turnbuckles short enough to fit?

asked by: Derek T

0

Expert Reply:

The HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs # LC182895 have a minimum reach of 16-1/2". This means your tie-downs need to be at least 16-1/2" away from the attachment points on your camper. The best way to determine fitment would be to measure the distance from your campers attachment points to the tie-downs on your 2012 Ford F-350.

expert reply by: Scott S

0

Answer 1

The Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long #C45048 is the best extension we carry for your need. However, it is limited to 6,000 lbs when extended 24 inches, so it will not work for your…

view full answer...

Answer 2

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Answer 3

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Answer 4

At this time we only offer the Brophy Camper Tie Downs part #HSAB sold in a quantity of 4.

view full answer...

Answer 5

Hey Stephanie, Brophy has a set of camper tie downs that they do recommend for your 1998 Chevy K3500 with the part #TDSF so that is going to be your best option over the #HSAB. Do you have turnbuckles already?

view full answer...

Answer 6

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 7

Hello Keith, thanks for reaching out. The Brophy Slide In Camper Tie-Downs #HSAB will work for your 2019 Chevy 3500 Duramax Diesel and lance camper. The Brophy tie-downs are more of a universal solution and while they do work, they are not the most…

view full answer...

Answer 8

Unfortunately the deployable running boards are going to prevent the installation of TorkLift camper tie-downs so the only other option would be Brophy Clamp On Camper Tie-Downs #HSAB. These tie-downs clamp to the inner lip of the bedrails and angle…

view full answer...

Answer 9

It is very likely the Brophy Clamp On Camper Tie-Downs - Bed Mount #HSAB will fit your 1999 Dodge Ram 2500 with an 8 foot bed, but because this is a universal fit, there isn't any specific fit information for your truck, though I can help you…

view full answer...

Answer 10

You can use the Brophy Clamp On Camper Tie-Downs #HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs #HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are…

view full answer...

Answer 11

The reason the manufacturers of the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSAB have the plastic bed rail exemption is because depending on the thickness of the plastic bed rail you might not have…

view full answer...

Answer 12

The Brophy camper tie downs #HSAB are pretty universal and should fit your 1997 Chevy K1500 pretty easily but you might measure the bed rails just to be sure. As long as you have 2 inches of space between the lip of the bed rails and the side of the…

view full answer...

How to Determine if HappiJac Qwik-Load Turnbuckles Will Be Short Enough For Frame Mounted Tie-Downs

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching