Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These tie-downs clamp right onto your truck’s bed rails using T-bars and hex bolts, so you don’t have to drill or modify anything. The wide clamp plates grab firmly for a strong hold, and the setup can be done with basic tools. When you’re not hauling, you can remove them in minutes, leaving no trace behind.
The angled design gives you more space between the tie-down points and the sides of your truck. That extra clearance makes it easier to hook up and tighten your turnbuckles, especially when space around the fenders is tight. It’s a small detail that makes loading and unloading your camper quicker and less of a hassle.
To keep your truck looking sharp, each bracket includes neoprene pads where metal meets paint. These soft pads help prevent scratches, dents, or scuffs as you clamp down the tie-downs or remove them later. You get a secure mount without sacrificing the finish of your bed rails.
Made from heavy-duty steel and finished with a black powder coat, these tie-downs deliver solid strength while standing up to weather and road grime. The durable coating resists rust and corrosion, keeping them dependable through long trips and rough conditions.
You get four tie-downs with matching clamp plates, twelve neoprene pads, and all the hardware needed for installation. The setup creates stable anchor points at both ends of your camper so you can lock everything down securely before hitting the road.
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews
Good product! Thank you!
I thought they were very strong but got some bed distortion for some reason.
Hefty quality material, feels solid. Was worried trailer plug outlet would interfere, but it easily clears. Maybe some foam packing instead of brown shipping paper, paint is a little chipped up, nothing serious. Got these in anticipation of a future camper so haven't used yet.
I accidentally ordered this item while intending to purchase the Torklift frame-mounted tie down system, which I ordered as well. As a result, the Brophy tie-downs remain brand new and unopened in the box. While I can’t give a fair rating on their performance or quality, I wanted to note that the packaging and delivery were handled well.
Unfortunately, I now have to decide what to do with this item, but that’s on me not the product. Just make sure to double check your order to ensure you’re getting the correct system for your setup.
From start to finish the price, service and quality of the Brophy tie down great! Made in America
Great company to work with, they really care about customer service. Super product!
Worked as stated. Wouldn’t use anything else and a real comfort in knowing I will be traveling 4,000 miles in the next three months! Awesome equipment!
Kate F.
9/17/2025
Wow Steve, set-up looks great!! Where did you go for your first trip to break it all in?
They do the job and I can easily swap them to my other truck if needed
Charles
2/11/2026
Theyve been great they did what was needed at a cost we could afford but I plan on up grading to the frame mount like we had on another truck and putting the Brophys on our secondary truck
Parts are better than expected. Great service.
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
April
7/11/2014
Haha
Part is what was represented and arrived when promised.
Instillation went well and did the tric k!
Gwendolyn Y.
6/8/2025
Your set up looks great, Paul! When's the next camp out?
That’s fine with the order except the rubber pads that they would dry and unusable.
Got these as a quick one time use until I could get the frame mounts and fast guns. They go the job done and did ok for the 100 miles I had to move my new camper.
Shipping was super fast and I received exactly what I ordered.
Very unstable system causing sway on the road. Turnbuckles rattled loose and had to be tightened about every 50 miles.
I will be returning these ASAP. Something this dangerous should not be sold!
Heavy duty and not hard to install. No drilling.
Gwendolyn Y.
5/19/2025
Install looks great, Kenneth! Have you been out with your camper yet with the new tiedowns?
Not what was expected. Would not stay tight to the rail of the truck. Called the manufacturer, sent them pictures, I was told that the bolts needed to be flat on the tiedown. They can't be because of the welding, there is no room for them to set flat / flush. I also purchased lock washers anticipating they would help, they did not. Might be an ok product for very short trips, I would not recommend them. They are nicely finish.
It takes me a little extra time to install due to having to remove my tonneau cover bedrails, but these tie downs work great with my slide in truck camper.
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
Steve
3/23/2025
I have had no problems with them sturdy built strong enough to do the job and theyre also easy to take off and put back on right now Im in a RV campground for a few months and I took them off. On and off in about 10 minutes
Jerred H.
3/23/2025
They stuck out too far. I could not back the vehicle between the jacks of the camper. I have to return them.
Dale
5/1/2026
I had to return them. They stuck out too far past the camper jacks. I could not use them. I bought themn before going nearly across country to buy a used camper. I couldnt use them. Had to improvise to get it home.
overall pretty good product - the T-brackets did not reach the side walls due to the tonneau cover rails...if the T-brackets came in 2 lengths, these would be perfect. I solved the problem with some creative brackets.
I have a F150 lariat with running boards that didn’t allow me to hook to the frame of my truck. I use the Brophy attachments from the rail and they are heavy duty secured well and I just drove 2200 miles and they held up perfectly.
Very happy with the way they attach and how my truck camper was secured.
Good idea although they flex up when a load is fastened to them with turnbuckles. Had to drill a hill through bed rail and add bolt, nut, and Washer to make a solid connection to truck.
I put a brand new 2025 Lance SQ605 on my 2017 Ram 1500. The camper lives on my truck year round. Highways and Mountain, I put the Brophy’s on with turnbuckles and stainless carabiners. Have been happy and no problems. Have not had to tighten them as much as I thought I would. They stay snug and fixed! Really happy with them.
Condition: Installed
Notes: Item has been installed and gently used.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Kate F.
2/5/2026
We are always looking for ways to improve Ronald, I will let our shipping team know. What kind of in-bed camper are you looking to get?