Replacement Landing Gear And Jacks For Lippert Ground Control 3.0 4-Point and 6-Point Systems

Question

Question:

can i only order jack without electric i only need to replace the jack or does it only come all connected

asked by: Robert M

0

Expert Reply:

The Lippert Ground Control 3.0 Replacement Jacks are only available as complete assemblies with the Motor # LC343758 attached. Here is a list of all the different jacks.

Lippert Ground Control 3.0 - 4-Point Set # LC358590
Front Legs # LC305340
Left Rear # LC305339
Right Rear # LC344792

Lippert Ground Control 3.0 - 6-Point Set # LC675817
Front Legs # LC305340
Middle Left # LC305339
Middle Right # LC344792
Left Rear # LC342610
Right Rear # LC428493

expert reply by: Bud M

0

Answer 1

It sure can Larry. The Mach-C Everest Variable Speed RV Air Conditioner System item #CM35MR includes an air distribution box that can be used for a top down set up. There's a baffle built into the air distribution box that can be removed to push…

view full answer...

Answer 2

Thank you for the picture of your jack motor as that makes it very easy to identify it. You are correct the part #LC305340 is the correct jack motor and leg but if you instead wanted just the motor you would want the part #LC343758 and you'd be…

view full answer...

Answer 3

Unfortunately, there is not Kenny. If your Replacement Front Jack for Lippert Ground Control 3.0 Leveling System item #LC362485 is damaged or not functioning correctly the only option available is to replace it. The Replacement Front Jack item…

view full answer...

Answer 4

Hello Johnny, The Lippert Ground Control 3.0 #LC675817 uses mostly sealed landing gear components, so there is not really a way to fully grease the internal gears like you could on some older manual landing gear systems. What you can do is keep the…

view full answer...

Answer 5

Unfortunately, you can not Kevin. If you bent the inner extension tube on the right front leg then you will need to replace the entire leg. The Replacement Front Jack for Lippert Ground Control 3.0 Leveling System item #LC362485 is the correct one.…

view full answer...

Answer 6

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 7

If both middle jacks are not retracting or extending on your #LC675817, odds are one or more of the fuses is out. There is a fuse for each of the legs and if one of these is bad, it will definitely cause the legs not to work. This can be mounted just…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…

view full answer...

Answer 10

You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…

view full answer...

Answer 11

Hey Tim, thanks for reaching out. Sure can! For your 2024 Grand Design Reflection 226RK with 4,400 lb axles, the correct Roadmaster Comfort Ride system is the following: - Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem…

view full answer...

Replacement Landing Gear And Jacks For Lippert Ground Control 3.0 4-Point and 6-Point Systems

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching