Search: trailer leaf springs   >  

Hey Roland, thanks for reaching out! Overslung axles are a special order situation and we unfortunately only have standard axles here at etrailer. With that being said, you can order a standard axle that meets your specs and then use the Dexter…

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as…

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're…

So first I want to verify how you measured the leaf springs. On the etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles #e88SR the 26" measurement is from center of leaf spring hole to center of leaf spring hole when the…

Hi Wes, Yep, if you'd like you can definitely go with the 6,000 lb capacity, 26" long 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e94SR. It's not going to hurt anything, though the ride will be a bit stiffer compared to the…

I went and checked the thickness for the Tandem Axle Trailer Fenders #HP52VR and they are just over 1/16" or a 16 gauge aluminum.

Hello Lyn; I can definitely point you in the right direction of a new shackle kit and leaf springs for your 2019 Grand Design Imagine 2500RL. The 2-1/4" long shackles are pretty common and for that I recommend the MORryde Suspension Upgrade Kit…

Hey Dan, The info you provided does tell us a bit about the axle but isn't enough to look up what components go with with it. With it being a 3,500lb axle it's probably a generic 3,500lb kit for the bearings and seals but I'd hate to not…

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

Dexter doesn't actually make a 4k rated axle, but they do make a 4.4k axle which has a diameter of 3 inches. The next smaller axle is a 3,500 lb axle which has a 2-3/8 inch outer diameter.

Hello Ben. Anytime we see a trailers suspension go "wonky" like that it is almost always due to incorrectly sized suspension components. Since you say you replaced things recently, I suspect this is the issue. If the equalizer is pivoting…