Can Spare Tire Remain In Place With etrailer Brand e98858 Hitch Installed on 2008 Toyota Highlander

Question

Question:

This vehicle has 19inch tires including the spare. Will this be a problem?

asked by: Frank

0

Expert Reply:

One of the Draw-Tite hitches available for your vehicle won't allow full sized spare tires to remain under the vehicle, but this isn't the case with the etrailer # e98858 hitch.

As long as your 2008 Highlander is equipped with the 245/55-19 stock tire size, the etrailer brand Class III hitch you've looked at, part # e98858 will fit and will allow the 19 inch spare to remain in place under the vehicle once the hitch is installed.

If you plan on towing with the hitch, you'll also need a trailer wiring harness like part # 118449, a ball mount like # 2753 and for a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball.

I've linked to install videos for the hitch and the trailer wiring harness mentioned above.

expert reply by: Mike L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I would be happy to help you set up your 2013 Toyota Highlander for towing. I will start by confirming that the etrailer Trailer Hitch Receiver item #e98858 does fit your Highlander. Since you do not have any vehicle connectors at the rear of your…

view full answer...

Answer 4

I recommend using the etrailer Trailer Hitch Receiver #e98858 for a bike rack on your 2013 Toyota Highlander. This is rated as the same difficulty as pretty much all of the other hitches that fit your Highlander and the biggest benefit to this hitch…

view full answer...

Answer 5

Hey Travis. The trailer wiring for the 2013 Toyota Highlander Hybrid is the same as the standard Highlander. The difference in which harness to choose will be impacted by whether or not you have the tow package. The T-One Vehicle Wiring Harness item…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Phillip, I know it's frustrating when the RF monitor goes blank because it takes away that confidence that everything is working properly while you're towing. Since you've already replaced the fuse, the next thing I'd check is…

view full answer...

Answer 8

The issue with the Draw Tite hitch part #75726 not lining up with the holes on the vehicle like your 2010 Toyota Highlander is actually due to the hitch getting bent in shipping and not a design flaw. Unfortunately hitches are somewhat heavy and…

view full answer...

Answer 9

The Draw-Tite trailer hitch, #75726, will fit your 2008 Toyota Highlander with the factory OEM 19 inch full-size spare tire. There is a special note in the instructions which I have linked for you. The note states that when storing the spare, it is…

view full answer...

Answer 10

Hey Dan. The etrailer Hitch item #e98858 will indeed work with your full sized spare tire. This hitch is custom fit for your 2008 Toyota Highlander. It is a class III hitch, with a 2" receiver, it has a 5,000 lbs towing capacity, and a 750 lbs…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Can Spare Tire Remain In Place With etrailer Brand e98858 Hitch Installed on 2008 Toyota Highlander

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching