Base Plate Kit Options for Flat Towing a 2013 Ford Edge

Updated 05/29/2020 | Published 11/13/2017

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2137)

$575.00

2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights

(173)

$38.04

Blue Ox Base Plate Kit - Removable Arms

(4697)

$459.86

Blue Ox Alpha Non-Binding Tow Bar - RV Mount - 2" Hitch - 8,000 lbs

(462)

$1079.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3249)

$188.48

Roadmaster Battery Charge Line Kit for Towed Vehicles

(1235)

$42.89

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(407)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(660)

$69.90

Roadmaster Hy-Power Diodes (Qty 2)

(340)

$34.59

Roadmaster Brake-Lite Relay Kit for Towed Vehicles

(711)

$44.50

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(767)

$1175.00

Question:

Im looking for a base plate for a 2013 Ford Edge, NON ecoboost, NO adaptive cruise control. Does Roadmaster make a EZ product for this vehicle? I dont want square tube with locking pins and I DONT want a cross-bar to attach the tow bar to. Thank you.

asked by: Mark N

Expert Reply:

For your 2013 Ford Edge we have 2 different options for a base plate kit.

One is the Roadmaster XL # 4408-1 and the other is from Blue Ox # BX2628. The both are compatible with the non-EcoBoost without Adaptive Cruise Control. The difference between these options is that they install slightly different and the removable draw bars have a different design.

The Roadmaster XL # 4408-1 will work great with the Roadmaster Falcon 2 Tow Bar # RM-520 and 6K Coild Safety Cables # RM-643. If you choose to go with the Blue Ox # BX2628 the you will need to use the Blue Ox Alpha Tow Bar # BX7380 instead which comes with safety cables.

Keep in mind that for a complete flat towing setup you will also need vehicle tow bar wiring, a supplemental braking system, and most likely a high-low adapter.

Since you will need to keep your key in the accessory position while flat towing I recommend going with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 for tow bar wiring. You can then install the Roadmaster Battery Charge Line Kit # RM-156-25 to the middle pin of the 6-Way connector on your Edge to keep your battery charged. You will also need to install the Brake Light Relay Kit # RM-88400, and if your Edge has separate lighting you will also need to install the Converter # 118158 and 2 additional Diodes # RM-792.

The SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 is one of the best ones that w currently have to offer and I highly recommend using it. Once installed it is simply a matter of flipping a switch for the system to be ready for flat towing. It installs in such a way that you hardly notice it is there when you are not flat towing.

Some flat towing setups require the use of a high-low adapter so that everything is level. I have attached a link to our selection of high-low adapters as well as a helpful article on how to choose the correct one for your application.

I have attached some installation videos you can check out.

Be sure to follow any specific instructions laid out in your owner's manual for flat towing.

expert reply by: Jon G

Matthew H.

5/27/2020

I have a Demco tow bar Excali-Bar III class 4 hitch I need a base plate to fit my 2013 Ford Edge that will work with it. also need brake system and wiring

Chris R.

5/29/2020

For your Ford Edge the Demco Base Plate Kit # DM9519210 will work perfectly and is compatible with your existing Exacli-Bar Tow Bar. For lighting/wiring I really like the Roadmaster Diode Fexo-Coil Kit # RM-15267 and for brakes I recommend the Brake buddy Select 3 # HM39524.