Feature Breakdown: Trailer Hub and Drum Assembly Video

Dennis, many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. For your Lippert 4,400 lb axle, you can use the Trailer Hub and Drum Assembly #AKHD-655-35-K. Your 4,400 lb axle does…

Thanks for the information but I was not able to find out what drum you need. I am going to need you to pull one of the hubs off and read the numbers stamped into the sides of the bearings. These will tell me what I need to know. The Trailer Hub and…

Thanks for the Picture. What you have there is a 6 on 5-1/2" hub for a 3,500 lb axle. We do have a replacement hub for your Truryde RVD-H-65535 hub. The correct replacement will be part #AKHD-655-35-EZ-K. This will include the hub, bearings,…

Yes, a 2018 Ford F-250 can be flat-towed with all four wheels down behind a motorhome. However, if you have a 2WD model then there is a required drive shaft coupling (disconnect) which we do not offer. There are also certain procedures that will need…

Your 6 X 135 6 lug hubs, are not trailer hubs. I only have timbren axle less suspension systems for trailers, so your hubs are not compatible with anything we offer. The closest thing I have to what you are looking for is Timbren Axle-Less Trailer…

While I do not have any way to look up the parts used in the construction of your 2004 Weekend Warrior Super Lite FS 2300 I do see it has a GVWR of just over 7,000lbs which means you likely have 3,500lb leaf springs under your trailer. You will need…

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

The Lippert 126003 is a 3,500 pound hub/drum and has a bolt pattern on 5 on 4-1/2 inches. The Trailer Hub and Drum Assembly #AKHD-545-35-K will be the replacement you will need. The hub and drum has an Inner Bearing #L68149 and an Outer Bearing…

I do have just about everything you are needing. The only thing that we don't currently carry is a galvanized axle rated for 3,500 lbs. If you check with a local trailer garage/store they should be able to help you order one that has a galvanized…

You can't use conical/tapered lug nuts like the #12CLN on wheels with flat bolt seats; instead you'll want to use a lug nut with a flange like the Flange Wheel Nut - 5/8" #95188. If you can tell me which wheels you've got and the lug…

A steel wheel like the #TA32FR Taskmaster steel modular 15 x 6 wheel can use a standard lug nut like part #CE11051, but I personally prefer the better looking #12CLN. Either lug nut is a 60º cone style, which is compatible with the wheel you…

The correct hubs for the 4400 Lb Lippert Axle NV178936 are 3,500 lb hubs as confirmed by Lippert. If you need to replace the hubs, I recommend Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased part…