Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Driving with misaligned axles can lead to uneven tire wear and a bumpy ride. The Correct Track Trailer Alignment and Lift Kit allows you to precisely adjust the axle alignment in 1/4" increments, ensuring a smooth and balanced towing experience. Perfect for those long road trips where every mile counts, this feature can save you from the cost and hassle of frequent tire replacements.
Newer trucks tend to ride higher, which can cause an unlevel connection with your trailer. This kit's adjustable lift options of 1-1/4" or 2-1/4" bring the balance back to your setup, allowing for safe and smooth towing. It's an ideal solution whether you have a tall vehicle or a camper with clearance concerns.
Tired of shelling out for new tires every season? Misaligned axles can make your tires wear out faster, reducing fuel efficiency and affecting your rig's handling. The Correct Track system integrates seamlessly with your trailer's existing suspension, correcting any imbalance and stabilizing your ride for longer tire life and better mileage.
Worried about complicated installations? This kit eliminates the need for drilling, making it easy to install with your existing leaf spring suspension system. The ideal setup for DIY enthusiasts, this straightforward process equips you with the tools to enhance your ride with minimal effort.
Many fifth-wheel trailers face the challenge of bed side rails clashing with tall pickups. The Correct Track kit raises your trailer, providing the extra clearance needed to match new truck heights and avoid damage. It’s designed to make your camping or cross-country journeys more hassle-free.
This kit is engineered for tandem-axle trailers and RVs equipped with leaf spring suspensions. Supporting trailers with hangers of various sizes, it ensures an optimal fit for your setup. Whether you're towing a boat, camper, or utility trailer, this system is ready to meet the demands of your adventure, making it a must-have for serious road warriors.
Looks great and hopefully will work as advertised. Will be installing in a couple of weeks.
Great customer service from beginning to delivery.
All the parts are quality made, but I had to replace the axle and didn't need to use the Correct Track Trailer Alignment and Lift Kit.
The listing for this product was confusing. I thought I was ordering the LCI kit, even double checked part numbers, they are the same. What I got was a kit by The Mobil Outfitters. Maybe they are part of LCI, I don’t now..... But, now I know why this kit is cheaper than the LCI kit, I performs the same function, but it’s a little crude. They supply grade 5 standard bolts where the LCI kit has the nice shoulder bolts. I guess I should have looked really hard at the picture, because the parts are displayed as you will get them.
Another big gripe for me was that the reinforced spring slot has its inside reinforcement plate slightly out of alignment with the main plate. Did not realize this until I forced a bolt through and ruined the fine threads on a bolt.
It gets the job done, just not as refined as the LCI kt.
I needed to raise the height of my Keystone Laredo because my new truck was too high for a level pull. And it also allowed me to correct a tire wear that I had for years, due to an alignment issue.
Kaitlyn has been great with helping me with my orders for my trailer parts.
We have talked many times about getting all of the right parts that I will need. She is very helpful and I appreciate e-trailer for having great people working there.
Built heavy duty ,my axles are in line for once,opted to lift my rig at 2 1/4 " it sits level with my 17 dodge 3500. I like this kit better than the lippert kit. This kit is like it was made for my suspension.
The kit came exactly as described and works as indicated. The shipping was stunningly fast but that might have just been my location. Either way everything was delivered quickly and as described.
I am not sure if I did not read the part about it not working with my Dexter equalizers but I had to modify the kit considerably to get it to fit with my system. The equalizers rubbed on the plates and the plate with the holes extended to far down and rubbed on the rubber of the equalizer. I made it work for me. So far so good.
This will not be easy to install. The product is designed for use on 2" ID spring supports, however our supports are 1-7/8" ID. Hence bolt lengths and etc. will be a PITA to correctly install. Not happy to see this issue, however it is better to notice before beginning the project. This will end up being a 2-day minimum project with all the time spent going to the hardware store. However, upon completion it should work to correct our trailering concerns.
Easy install did in an afternoon.
Two problems (errors by me) .
1. MARK with BRIGHT PAINT MARKER the correct hole on the adjustable spacer including which side goes out. (would be nice if they were labeled) I reversed one and had to go back and fix it. Took about 15min to swap the position.
2. Be sure to predrill the self-tapping position screws. I did.- and even there I snapped the head off one.
Suggestion- Order replacement bolts that are ported for grease fittings, (20$ at your auto parts store) you will need two per axel.
When you are done you can check if your work is matching your desires by looking at the bolts and are they in the middle front or rear of the alignment channel at the bottom of the spacer
All told raised my 5th wheel 1”
Corrected my rear axle from under ½ inch error to 1/16 the out of parallel.
It CAN work with the Moryde CRE3000 suspension! For obvious reasons etrailer cannot and will not advise on making any modifications to this product and in doing so you are likely forfeiting any chance at returns or exchanges. I spent plenty of time researching best I could before pulling the trigger on this because I didn’t want to replace my perfectly good Moryde CRE3000 stabilizer unless I absolutely had to or the modifications would be too much work than it was worth. I’ll include as much information as I can.
Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!
When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.
I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)
I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.
I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.
Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.
Purchased a year ago for a new duel axle enclosed trailer. From the factory, this trailer was out of true. I was replacing tires every couple thousand miles. This fixed it all. I would recommend.
ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!
Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to
Daniel
5/9/2024
This product has helped us tremendously because of where we live. We are in mountainous country my driveway is hard to get into and this lift kit and the shock absorbing equalizer kit has made our trailer awesome. I would recommend it to everyone that has a bumper pull fifth wheel double or triple axle trailer you will love it
I have not installed the kit yet. The ordering process was easy and had plenty of information to make sure it was what I needed. The delivery date estimated during the order process was not accurate. The delivery date during the order process stated it to be the end of April. A few days after the date had passed I received a notification saying the order was being gathered and was expected to ship May 1. I received the order on May 6. This is not a huge issue, but with porch pirates these days, I make plans based on the stated date when ordering.
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***
It raised my camper to better match the height of my truck. Also, I was able to align the axles for more even tire wear.
Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied
Jenny N.
8/31/2023
It is very unusual for the holes to rotate once this is installed. The manufacturer will be in contact to discuss this with you.
I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.
Thomas
5/26/2023
After 2 years and 3300 miles, product is still working as expected. Completely solved the problem of tire wear, and excessive brake heating which lead to brake failure. Very happy with product.
This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!
The Triple Axle Kit costs less and includes three boxes instead of two, as with the tandem axle kit. However, the instructions could be clearer. I’d recommend choosing a triple axle set even if you’re working on a tandem axle, so you can adjust each hanger individually and maintain the correct spring angles. Otherwise, if you only install it on the center and rear hangers, you’ll need to adjust both the center and rear if you need to tweak the front right wheel, which can be tricky to get right. Alternatively, buying two single-axle kits could save you around $150 and simplify the setup.
Installing this kit on my travel trailer corrected my dual axle alignment problem which was wearing the inside of the left rear tire. It was easy to install, easy to understand, and very adjustable.
Product is great. I just wish the instructions addressed tandem and triple axle applications. And some actual pictures of installation would be even better.
Used this to lift my fifth wheel 2 inches to reduce the nose height condition that is common with newer trucks. Not as easy as changing a tire though.
I can’t review the product since installation is not scheduled until Friday. I have ordered fro eTrailer because I like their service, customer service and quick ship and deliver.
Price was good and it was in stock.
I was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.
Jenny N.
6/12/2023
To be honest it looks like there was a hiccup when the order was sent to the warehouse. We did not have the kit on hand to ship right way and needed to wait til our next shipment came in which was just in a few days.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Michael
3/27/2024
So, far even with chug holes and some rough interstate pavement, no more tire rubbing on the upper part of my self-made wheel wells. The Lift Kit has worked great!