Replacement Hubs, Drums, and Brakes for 3,500 LB AL-KO Axle
Published 08/27/2015
Products Featured in This Question
Question:
I have a 7 x 27 trailer that has Alko axles and brakes They are 5 bolt x 4.5 inches I believe there are 10 inch breaks Do you guys sell the whole kit for this with the drum.
asked by: Rob
Expert Reply:
If you have a 3,500 lb AL-KO axle and the brakes are indeed 10 inches, you can use Trailer Hub and Drum Assembly, # AKHD-545-35-K for a standard spindle and # AKHD-545-35-EZ-K for an E-Z lube spindle.
For brakes you can use etrailer.com Trailer Brake Assemblies, # AKEBRK-35L for left hand side and # AKEBRK-35R for right hand side or the self adjusting versions, # AKEBRK-35L-SA for left hand side and # 2AKEBRK-35R-SA for right hand side.
To confirm that you do have a 3,500 lb axle you would just need to check your bearings. A 3,500 axle is going to use inner bearing # L68149 and outer bearing # L44649.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit Recommendation for 3,500 lb Dexter Axle
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured Before May 2009 - 10" - Right Hand
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Q&A: Replacement Brakes, Drums, And Bearings For A 2007 American Hauler Trailer With BD-545 AxleTek Drums
- Q&A: Replacement Parts For Dexter 4,000LB Axle Under a 2019 Keystone Hideout LHS Travel Trailer
- Q&A: Replacement Brake Assemblies for a Trailer with 3,500 Pound LCI Axles
- Q&A: Difference Between Trailer Hub Grease Seals 10-40 and 10-19
- Q&A: Replacement Brake Shoes for Dexter 4400 Pound Axles Made Before 2009
- Q&A: Can Drums from a Trailer with 10 Inch Hydraulic Brakes be Re-Used When Converting to Electric Brakes
- Search Results: 010~019~00
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Search Results: brake adjuster
- Search Results: adjuster