etrailer Trailer Hubs and Drums AKHD-545-35-K Review

content loading



Customers compare AKHD-545-35-K to these similar products




Products Featured in this Video



Review of etrailer Trailer Hubs and Drums AKHD-545-35-K


Today we are going to take a look at the ten inch trailer hub and drum assembly for 3,500 pound axle with the five on four and half inch bolt pattern. This trailer hub and drum assembly will include the bearing races they are preinstalled in the hub. The outer race you can see right here. The inner race is right here on the back. It also includes the inner and outer bearings, the grease seal, the grease cap and the lug nuts. This assemble is designed to work with both electric and hydraulic brakes. Application again is for 3,500 pound axles, has the bolt pattern of five on four and half inches.

Now when we say a ten inch hub and drum assembly, what we are measuring is inside the inside. This is designed to work with ten inch brake assemblies. If we take a ruler and measure inside the inside you can see right at ten inches. The inner bearing which is the larger one, it is part number L68149, the inner diameter of this bearing is 1.378 inches. This will go right in the inner bearing race just like that. I'm just showing you where they go.

When you install these you will be greasing these bearings up. With that installed just like that, then you take your grease seal, that has an overall diameter of 2.565 and then that would go right there. You tap that in to place to hold everything in. Then you move to the outer bearing. The outer bearing which is the smaller one. That's part number L44649 has an inner diameter of 1.063 that will go right on the outer bearing race just like that.

Then your grease cap has a measurement of 1.988 that's the flange diameter. That will go right over that and you tap that right into place to hold everything there. Last you will have your five lug nuts and their a half inch by 25 and your lug nuts are designed to hold your wheel and tire assembly on to this brake drum assembly so you just go ahead and put your wheel right up on here under the studs. Go ahead and put your lugs on there, go ahead and tighten them down, you want to make sure you torque them to the correct spec's for your application. That should do it for the review on the ten inch trailer hub and drum assembly for 3,500 pound axle with the five on four and half inch bolt pattern.

Info for this part was:

Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Chris R
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.