bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
Dexter

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

Part Number: 84545UC1-EZ
In Stock
$131.52
Trailer Hubs and Drums
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Great Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased part number 84545UC1-EZ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (357)
  • Q & A (0)
  • Photos

Dexter Trailer Hubs and Drums - 84545UC1-EZ

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • EZ Lube
  • Pre-Greased
  • Standard
  • Standard Grade
  • L68149 / L44649
  • 1/2 Inch Stud
  • Dexter

Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • E-Z Lube and standard grease caps, spindle attachment hardware, and lug nuts included
  • Pre-greased idler hub is easy to install - no need to pack bearings
  • Sturdy iron construction
  • Made in the USA


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel studs: 1/2" diameter x 1-1/4" long
  • Weight capacity: 1,750 lbs
  • 5-Year limited warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-248-1G Dexter Pre Greased Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - EZ Lube - Pre-Greased

Replaces 84545UC1-EZ and K08-248-95




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

357 reviews
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

All the parts were in the box, easy swap out if we have a issue on the road. Wonderful service, small price for piece of mind.



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
357
Show More Reviews

See what our Experts say about this Dexter Trailer Hubs and Drums

  • Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
    The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
    view full answer...
    Image 1 for
  • What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
    The Dexter Trailer Idler Hub Assembly for 3,500-lb Axles item # 84545UC1-EZ fits a item # L68149 bearing which has a 1.378" inner diameter. I would not recommend using this hub on a boat trailer. Instead, you'll want a galvanized one like item # AKIHUB-545-35-G-EZ-K. It's designed to get wet so it'll last longer. What kind of boat trailer do you have?
    view full answer...
  • Recommended 3500lb Axles To Replace Damaged Axles On Trailer
    We do not sell Bendron Tito's axles, and I was not able to find any information about them online. Are you sure that is the correct name for the axle? If you can send me the specs of your axle I would be happy to see if we have another brand of axle that would work for you.
    view full answer...
  • How to Determine Hub and Spindle Size
    The spindle dimensions are as follows: A is the mounting dimension, B is the seal dimension, C is the inner bearing surface, D is the outer bearing surface and E is the diameter of the threaded portion of the spindle for spindle nut selection. Say you need a spindle and hub for a wheel with 5 on 4-1/2 inch bolt pattern and an axle that is 3500 lbs. For a single axle trailer you can use two of either the item # TRU64FR, if your axle is round or item # TRU47FR if your axle is square. Then...
    view full answer...
  • Recommended Tire Size Compatible with Timbren HD 3500-lbs Axle-less Suspension System
    I'll start off by saying that wheels and tires do not come with hubs, and what hubs you'll be able to use depend on the spindles on the axles, and whether or not you'll want brakes on the trailer or not. If you're going to be using the Timbren # TASR35HDS07, you'll need hubs that have # 25580 inner bearing and # 15123 outer bearings, like the # AKHD-655-6-EZ-K for a hub and drum assembly or # AKIHUB-655-6-EZ-K for idler hubs. If you're going with the hub and drum so you can add brakes,...
    view full answer...
  • How to Pick Out Replacement Hubs for a Boat Trailer
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. Since the figure you came up with doesn't match any of the 5-bolt bolt patterns I am going to need to to recheck your bolt pattern. For further info on this check out the FAQ article I attached on this. Next thing you will need to know is what spindle you have on your trailer. In order to do that...
    view full answer...
    Image 1 for Image 2 for
  • How to Determine the Correct Hub for My MacGregor Sailboat Trailer
    Determining the correct wheel bearings, seals or hubs for a trailer is normally done by using the existing inner and outer wheel bearing part numbers and grease seal part number. This is the only way to be sure that the correct parts are ordered. The bearing part numbers will ensure that you get the proper size and weight capacity parts for your application. When replacing the hub you will also need to be sure that you measure the wheel bolt pattern (see link) and, if the axle capacity...
    view full answer...
  • Replacement Hub and Bearings for Fish Right River Master Jet Boat Trailer With Dexter 8-248 Hubs
    Thanks to the information and picture you provided I can definitely help. The replacement for your Dexter 8-248 is the # 84545BX. If you want a pre-greased option you can use the # 84545UC1-EZ. If you don't care about it being from Dexter the # AKIHUB-545-35-G-K you were looking at will also work. These all fit a standard 3,500 lb axle with # L68149 inner and # L44649 outer bearings.
    view full answer...
    Image 1 for
  • Replacement Axle and Leaf Springs For Road Warrior Trailer
    You want to replace the axle and leaf springs with the same dimensions of axles and springs you have now on the Road Warrior. The Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 measures 95" hub face to hub face. It also measures 80" from spring center to spring center so you wan't to make sure your existing axle is the same size. This axle does not come with hubs so you wan't to make sure your existing hubs will fit the spindle's of the new axle or you can replace them....
    view full answer...
  • Replacement Suspension For A 2010 Karavan WC-2450-84 Trailer
    I can certainly point you in the right direction. From what I can see on the Karavan website, your 2010 Karavan WC-2450-84 Trailer has a GVWR of about 3000 lbs and is about 100" wide. It is of course preferred to have you as the owner confirm these specs prior to ordering. That being said, for a replacement axle we would be looking at a 3,500 lb axle like the # 7359765 which measures 95" long from hub face to hub face. If you can confirm the hub face length of the current axle, we will...
    view full answer...
  • Can a 3,500LB Trailer Axle Be Used To Replace a Dexter 3,000LB Axle On a Tandem Axle Travel Trailer?
    A Dexter 3,500LB Axle # 7359765 is going to also have a 2-3/8" diameter axle tube like your Dexter 3,000lb axle. This will require you to have different hubs as the 3,500lb axle is going to have a larger spindle. If the axle you are replacing has Idler Hubs # 84545UC1-EZ that is all you will need. Otherwise if your axle has electric brakes you may have issues with new brakes as the 3,000lb axles commonly came with 7" brake drums while 3,500lb axles commonly use 10" drums. If you can provide...
    view full answer...
  • Is Dexter Hub 84545UC1-EZ Sold in Pairs or Individually
    The Dexter trailer axle # 84545UC1-EZ that you mentioned is sold individually. If you needed two you would need to order a quantity of two.
    view full answer...
  • Determining Replacement Hubs And Bearings For My 2005 Wesco 128 Trailer
    This is an torsion axle on your 2005 Wesco 128. You also think the axles are rated for between 3,000 lbs and 3,500 lbs. Without your specific axle model, I can only speculate which hubs and bearings you need based on the information you provided. For example, we offer a torsion axle rated for this weight, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs, part # 8327812. If your axle has the same measurements, the hub face to hub face measurement of 89"...
    view full answer...
    Image 1 for Image 2 for
  • Dexter Hub Replacement for Hub Marked 8-248
    The hub you want as a replacement for what you sent in a picture of is the Kodiak Trailer Idler Hub Assembly # Q-HUB84545 which is a galvanized hub for a 3,500 lb axle with a 5 on 4-1/2 inch bolt pattern.
    view full answer...
    Image 1 for
  • Looking For a Replacement 15 Tire and Wheel With 5 on 5 Bolt Pattern
    From the pictures you provided, you do indeed have a 5 on 5 bolt pattern. This isn't the most common bolt pattern though so if you were thinking about replacing the hubs as well, I do recommend swapping to the much more common 5 on 4 1/2 bolt pattern. However, due to the corrosion present in the pictures, I suggest pulling one of the hubs off to verify your bearing numbers. If the trailer is older, there can be a few different ones that were used. If the Inner Bearing is an # L68149 (1.378"...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Shorelander Hub Kit SS734 for a Trailer
    From the research I did the SS734 bearing/hub kit is designed for a number 84 spindle so the correct hub is the part # 84545UC1-EZ.
    view full answer...
  • Trailer Axle Option For M416 Trailer With & Without Electric Brakes
    The only option for an axle for your M416 trailer is what is called an axle-less system, as there aren't axles in that particular length. You can get these with either idler hubs (for without electric brakes) or hub and drums if you choose to use electric brakes. They are available in either a straight spindle or with a 4 inch lift if you want to add some extra height: - Timbren Axle-Less Trailer Suspension System - 2,000 lbs # ASR2000S02 - Timbren Axle-Less Trailer Suspension - 4" Lift...
    view full answer...
  • Recommended Axle To Replace 3000lb Axle With 86.5" Hub Face Measurement On Grand Design TT
    I have another option for you, but the closest standard axle we offer to your 86-1/2" hub face to hub face measurement is the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974 which measures 89" hub face to hub face and would add 2-1/2" total length. The spring center to spring center measurement is 74" but you can remove the current spring seats and weld the # TRSS238 in the correct place. The option I recommend is going with the Timbren Axle-Less...
    view full answer...
  • Replacement Axle-Less Trailer Suspension Square Axle 49.5 Hub Face and 38.5 Spring Center
    The Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS01 will be the only thing we carry to replace your square axle with the dimensions you have. This will replace your axle and leaf springs with a progressive spring and independent suspension. It has a weight rating of 2,000lbs and straight spindles. It does use larger spindles that will accept the Dexter Trailer Idler Hub Assembly # 84545UC1-EZ and has the 5 on 4-1/2" bolt pattern.
    view full answer...
  • Recommendation For Replacing A Dayton Fayette 9222 Hub
    Having a 1.25 spindle, it can be a few bearings that will fit. However, there will not be a hub that uses both an inner and outer bearing of this size. With that said, I highly recommend replacing your axles with something that will use a more common bearing combo. Doing this will require a few things. If you look at the Dexter Trailer Axle with Idler Hubs # 35545I-ST-89, it will have a hub face to hub face measurement of 89 inches and a center of one spring seat to the center of the other...
    view full answer...
  • Dexter Replacement 3,500LB Axle With 89 Hub Face, 70 Spring Center and 4 Drop Spindle
    The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 8327812 is going to be the closest to the Dexter axle you described. This axle has a 89" hub face to hub face measurement with a 4" drop spindle and underslung design. The axle is rated for 3,500lbs and the spring seats on the axle measure 74". You can weld on some new Spring Seats # TRSS238 to the 70" measurement that you are needing. I do recommend new U-Bolts # APUBR-1 as your current bolts will likely have corrosion. Two...
    view full answer...
  • Replacement Brake Shoes For Dexter 8-283 Trailer Hub Brake Assembly
    Hey Richard, The Dexter trailer hub 8-283 is a 10" x 1-1/2" design so you would need brake shoe kit # DX78FR for the right-hand side and # DX88FR for the left-hand side.
    view full answer...
  • Replacement Hub For Shorelandr Boat Trailer Using Hub 4470400
    We do have the Dexter Hub # 84545UC1-EZ and our etrailer Hub # AKIHUB-545-35-EZ-K which has the same 5 on 4-1/2" bolt pattern as the Shorelandr 4470400. Both hubs include the same Inner # L68149 and Outer # L44649 bearings the Shorelandr hub uses. Both these hubs will include a Grease Seal # 58846 with a 1.719" inner diameter. You will want to verify this is the correct seal as it looks like some axles use a spindle sleeve. So you may end up needing a different seal like the Seal # 168255TB...
    view full answer...
  • Replacement Dexter Idler Trailer Hub With 8-248 and T20 Stamped on Back Of Hub
    I can tell by the 8-248 and t20 stamped on your hub you will either need the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles # 84545BX or Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84545UC1-EZ. The idler hub for E-Z lube axles includes a grease cap with rubber insert so that you can pump grease into the spindle for additional lubrication. Your spindle must have the grease zerk on the end of the spindle to use that option.
    view full answer...
    Image 1 for Image 2 for


< Previous
123. . .9



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Michael B
Installed by:
Michael B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Zach D
Video Edited:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<