Replacement Hub For Shorelandr Boat Trailer Using Hub 4470400
Published 01/05/2023
Products Featured in This Question
Question:
I have a Shorelandr boat trailer and I need new wheel hubs. The Shorelandr part number is 4470400. Is there another brand such as Dexter or SeaChoice, etc that has a replacement?
asked by: Tim I
Helpful Expert Reply:
We do have the Dexter Hub # 84545UC1-EZ and our etrailer Hub # AKIHUB-545-35-EZ-K which has the same 5 on 4-1/2" bolt pattern as the Shorelandr 4470400. Both hubs include the same Inner # L68149 and Outer # L44649 bearings the Shorelandr hub uses. Both these hubs will include a Grease Seal # 58846 with a 1.719" inner diameter. You will want to verify this is the correct seal as it looks like some axles use a spindle sleeve. So you may end up needing a different seal like the Seal # 168255TB with a inner diameter of 1.687".
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: trailer leaf springs
- Search Results: 5 leaf trailer leaf springs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: timken l44649
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Vehicle Seat Covers
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: All You Need to Know About the Replacement Race for L68149 Bearing
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Complete Breakdown of the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Q&A: Replacement Hub For 2016 ShoreLand'r LUXR2314S7MH Boat Trailer
- Search Results: 4410130
- Search Results: grease seal 58846
- Search Results: akihub~545~35~g~k
- Search Results: 171255tb
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Hub Replacement for 1974 Prowler Camper with 3500-lbs Axles and 5 on 4-1/2 Bolt Pattern
- Q&A: Replacement for Hub to Fit with Shorelander SS734 Bearing Kit
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Ultimate Overview of the Lionshead Trailer Wheel Lug Nut