Dexter Replacement 3,500LB Axle With 89 Hub Face, 70 Spring Center and 4 Drop Spindle

Updated 03/08/2022 | Published 03/07/2022

Products Featured in This Question

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs

(784)

$314.42

Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

(1627)

$220.03

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(369)

$124.93

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1075)

$174.42

U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts

(1992)

$70.19

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(634)

$16.38

Question:

I need a replacement axle. Currently have a Dexter 3500# 89 inch hub face 4" Drop, underslung spring axle. 2 3/8 diameter 70 inch spring center or loose spring seats thank you for your time.

asked by: Scott B

Expert Reply:

The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 8327812 is going to be the closest to the Dexter axle you described. This axle has a 89" hub face to hub face measurement with a 4" drop spindle and underslung design. The axle is rated for 3,500lbs and the spring seats on the axle measure 74". You can weld on some new Spring Seats # TRSS238 to the 70" measurement that you are needing. I do recommend new U-Bolts # APUBR-1 as your current bolts will likely have corrosion.

Two of the Dexter Trailer Idler Hub Assemblies # 84545UC1-EZ can be used if you do not require trailer brakes. This will give you the common 5 on 4-1/2" bolt pattern used on 3,500lbs axles.

You will need two of the Dexter Trailer Hub and Drum Assemblies # 84546UC3-EZ and a Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 if you will need electric brakes. This will give you the same 5 on 4-1/2" bolt pattern as the previous hub.