Availability of 15 x 6 Trailer Wheels With 5 On 5 Bolt Pattern

Question

Question:

I’m looking for trailer rims I like the star flat 5 spoke size 15x6x5 on 5

asked by: Dale R

0

Expert Reply:

The 5 on 5 bolt pattern is not very common so the choice on wheels is fairly limited. We have the following wheel styles that fit your 15" x 6" with a 5 on 5 bolt pattern criteria:

-Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 5 on 5 - White Powder Coat # AM20528DX

-Vesper Steel Modular Trailer Wheel - 15" x 6" Rim - 5 on 5 - Black # TA97RR

-Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 5 - Silver Powder Coat # AM20538DX

-Vesper Steel 10-Spoke Trailer Wheel - 15" x 6" Rim - 5 on 5 - White # 560550WS1

If you really want a wheel with that style then I suggest swapping out your hub for one with a 5 on 4-1/2 bolt pattern so your options aren't limited.

For example, if you have a 3,500 lb axle using # L44649 outer and # L68149 inner bearings you could replace it with the # 84545UC1-EZ or # 84546UC3-EZ. This would allow you to use a 5 on 4-1/2 bolt pattern wheel that matches the size and design you're looking for.

expert reply by: Robin H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 5

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Availability of 15 x 6 Trailer Wheels With 5 On 5 Bolt Pattern

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching