Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-9/16" x 2-1/2". Incandescent dome light illuminates your trailer's interior. Push-button nylon switch controls on/off function. Screw-on lens. Durable steel base. Surface mounts with included hardware. 2-Wire design. (1) 1141 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck Lite # 549SWD
Optronics # IL21CB
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Peterson Trailer interior dome light with the switch and the clear lens. Now this is an incandescent dome light that'll provide bright white light to illuminate your trailer's interior. Has this push button nylon switch at the top here that'll control the on and off function. Does use incandescent bulbs that can be easily replaced. Does use a bulb type 1141. It's a durable steel base with the screw on lens and it has a clear lens over an incandescent bulb.
Now it is compatible with 12 volt DC systems to surface mount design to the trailer with the included hardware all shown here. It includes four small screws for installing the steel base of the light to the trailer and then two long screws, which will apply the . Or install the clear lens to the base and a foam gasket to help seal it.When you go to install this, you'll just put your wires through your foam gasket just like that. Put it to the base and then attach it down. That'll help seal it.
It is a two wire design as you can see. It includes a black wire for the power and the white ground wire. Few specs on this, dimensions on this. The overall length of it, one end to the other is going to be right at four and 9/16s inches long. The height on it is right at two and a half inches tall and the depth on it, the widest point, is about one and 3/4 inches deep.
Distance between the mounting holes, center to center is going to be right at three and a half inches. Wattage on the slide is 28 watts and now what I'm going to do is we're going to go ahead and hook this up to some 12 volt power just to show you how bright it is and how the switch operates.We'll go ahead and take our power wire and your white wire will be your ground wire. With those all connected we'll go ahead and turn on the light and you can see how bright the light is, and there's the switch to turn it off, turn it on. Go ahead and turn off the overhead lights, and you can see how bright of an interior light it is. Again, it's a clear Lens, so it gives you light on all sides.
Again, if you push it to turn it off, push it to turn it on. Go ahead and turn back on overhead lights, disconnect it. But that should do it for the review on the Peterson Trailer interior dome light with the switch and the clear lens.
Average Customer Rating: 4.6 out of 5 stars (18 Customer Reviews)
4-9/16" x 2-1/2". Incandescent dome light illuminates your trailer's interior. Push-button nylon switch controls on/off function. Screw-on lens. Durable steel base. Surface mounts with included hardware. 2-Wire design. (1) 1141 bulb.Everything was exactly as described .
We have ordered a lot of part of our Horse Trailer remodel. Everything has been excellent ! Even Tech help is awesome !
great customer service
We've used these lamps for years for utility lighting in our technical rescue trailers. Rough service. Lots of dust. They have been very reliable. On rare occasions we've had to blow dust out of a switch, but these switches actually give us less trouble than those that come in higher priced units. We will continue to use Peterson lamps.
Just the lights I was looking for to replace my old weathered lights
Quick and simple. Arrived fast.
Exact replacement for 32 year old interior light replaced on a featherlight tc horse trailer
Exact replacement
Easy install works great with the clear lens
It is a match to the one in my truck and working great.
Nice lights, compact and easy installation
Jesse W.
6/18/2016
Lights worked real well. Lot brighter than the old ones. Thanks.
Good product, reliable too. Installed in fish house, very bright..... Well done etrailer.com, thank you
Lights work great, very easy to install. Put 5 lights up in a 7x14 enclosed trailer and it lights up nicely.
Exact replacement light I was looking for and at a good price, happy customer.
Jenny N.
10/5/2022
I am sorry to see that you are unhappy with the light. I am happy to assist you.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dale
7/11/2023
Great