7-11/16" x 3-5/8" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts AMP connector.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Peterson LumenX LED Red Four Function Trailer Taillight. Now, this is an oval taillight for your trailer, serves four functions, it'll work as a taillight, a brake light, a turn signal, and a backup light. This does use LumenX optics, which will create a nice solid panel of light that'll illuminate the entire lens, and if you noticed right here, it has a cyclops-style design which will integrate a single backup light into your taillight. The regulated design on this ensures consistent light output, prevents over heating. Now, at the end of this video, I'm gonna hook this up to some 12 volt power just to show you how bright the light is, but I first wanna go over some of its features.
The LEDs on this will make great replacements for incandescent lights, they'll last 50 times longer, and they're more efficient, 'cause they'll provide brighter light with less power output, and of course, you don't have to worry about any bulbs to replace or brittle filaments that are gonna break. It is a red and a clear lens over six red LEDs and one white LED. Again, this is compatible with 12 volt DC systems, it is a recessed mount design, you can see it comes with the built-in plastic flange, and you can mount this in any 360 degree position. Now, this does accept the industry standard AMP-style weatherproof plugs, now, those plugs we do sell separately on our website, this one here you can see comes with five hardwired leads with a separate 3-wire plug and a separate 2-wire plug. This is DOT compliant, Department of Transportation, does meet the Federal Motor Vehicle Safety Standards 108 requirements for automotive lighting, and it is made in the USA.
Few specs again on this, there is six red LEDs, one white LED, input voltage 9 volts to 16 volts DC, dimension on this, and then we'll hook it up to some power. So the overall length, and I am gonna measure the plastic flange included, one end to the other is 7 11/16 inches long, the height, right at 3 5/8 inches tall, and the total depth, I'm gonna measure from the front to the back of the plug here that sticks out, so if we do that, you're gonna be looking at right at about 1 3/8 inches deep. So what I'm gonna do now is we're gonna go ahead and plug this in. Again, I happen to have the weatherproof plugs. We'll go ahead and plug the 3-wire one, and we'll go ahead and plug the 2-wire one in.
And then if I go ahead and turn on my 12 volt power, I'll go ahead turn off the overhead light, there's your taillight function. And then when you apply your brakes, you can see how much brighter it gets when your brakes are applied. And then when you do your turn signal, there's your turn signal, same way, it gets brighter. So that's a total of three functions, and then the last one we have is our backup light function. And once we get that all connected, and you can see when you go into the backup light mode, you can see the single very bright LED comes on, lets everybody know you're going in reverse.
Go ahead and turn off our power, turn back on our overhead lights. But that should do it for the review on this Peterson LumenX LED Red Four Function Trailer Taillight..
Average Customer Rating: 4.6 out of 5 stars (117 Customer Reviews)
7-11/16" x 3-5/8" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts AMP connector.Thank you for the prompt service.
I replaced the entire running lights system and the LED lights are high quality and work great.
The running lights and backup lights are all amazingly bright!
I really appreciate that they help keep my trailer visible and safe!
The installation was done without problem and the lights worked as expected.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
The lights look ok, but I haven't gotten them installed yet. My main complaint is the packaging, because everything I ordered was thrown loose into one box. You need to do better to ensure nothing is damaged during shipping.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
The light is very bright and is good quality I love it
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
perfect timing on the ETA of parts Thanks alot
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.