14-1/4" x 1-3/16" x 1-1/16". Waterproof identification light bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're taking a look at the Peterson LED identification light bar for trailers over 80 inches wide. This trailer light functions as an identification light bar. It features a sealed housing and lens unit. It does feature LEDs, so we have three light units with two LEDs per unit, so a total of six LEDs, two per light.LEDs make great replacements for incandescent lights. They last longer. They burn brighter.
They're much more efficient. With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments. Those lights sit on a stainless steel base, which is rust and corrosion resistant. It mounts to the surface of your trailer, so you've got a mount hole right here and a mount hole located right here.Now, on this unit we have a 60 inch lead wire. This is your main power wire, and then the unit grounds through your mounting hardware.
It's Department of Transportation compliant.Taking a look at the measurements real quick, starting with the overall length of the unit. So measuring edge to edge, it's going to give us a measurement of around 14 and one quarter inches long. Side to side right here, one and three sixteenths. And the overall depth, from the very back to the very front, gives a measurement of about one and one 16th inches deep. That's how far it sticks out from your installation surface.
The distance between your mount holes, center on center, is about eight and a half inches. Again, your lead wire length is 60 inches long.We're going to go and hook it up to power, that way you can see what it looks like with some power running to it. We'll also turn off our overhead lights so you can see it in a low light setting. So, you can see here that it sends out a really nice, clear, consistent signal. We have two LEDs per light, so if we combine all of those, that's a total of six LEDs.
Again, they have the nice red lens that goes over them. Allows plenty of light to come through. The LEDs on this unit are also covered with a limited lifetime warranty.That's going to do it for today's look at the Peterson LE . Excuse me. LED identification light bar for trailers.
Average Customer Rating: 4.8 out of 5 stars (47 Customer Reviews)
14-1/4" x 1-3/16" x 1-1/16". Waterproof identification light bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.I received my Peterson LED identification light bar today and have installed it on my Shorelander trailer. Etrailer's website was super easy to find and purchase my light replacement and was delivered in 3-days. Thanks much for the great service!!
Perfect clearance light for the rear of a boat trailer - submersible - completely waterproof. Delivery was very quick.
This was a nice replacement 3 bar light. Easy to install. Great quality and materials. Has always worked like it should. I would recommend this if you are looking / considering..
Everything good kept me informed on delivery date will order again thank
My 1997 boat trailer is back to full se rvice
I ordered 9 LED lights to replace the incandescent lights which were OE on my boat trailer. I found a great assortment of LED lights on the ETRAILER website at very competitive prices. The lights I purchased are very good quality and provide much higher night visibility as compared to the OE lights. My order was processed and shipped very promptly.
Easy to install and work well.
Fleet Maintenance Shop.
Wasn't aware of this spring relocation kit until finding it here. Needed something easy for our welder to install on a tandem, drop axle trailer to raise the deck higher as he is new to repair/fabricating work. After seeing the kit and reading the instructions, he thanked me for buying this kit because he wasn't worried about getting the spring saddles lined up.
Ordering from your web site was very easy, with all specs clearly shown. The order arrived 1 day earlier than I expected and it was exactly as described and without damage. I would highly recommend etrailer.com.
This is the 3rd time i've ordered from etrailer and the service is great, order was put together quick and delivered when it was scheduled to be.
This center light was a direct replacement for our Four Winns boat trailer and was very easy to install
Perfect replacement for my old one. Unless you have a disconnect on your old light you will need to splice the wire.
Got Just what I ordered and it is way brighter than old light bar
Exact replacement.
It's what I wanted but your packaging is not so good. You pack paper than put the product on top of paper no protection at all. The boxs was packaged badly to much tape and box was somewhat crushed
Product was fine but all in all could of been better.
Nice lights! Bright at night and easy to install!
I think your service and estimate time was excellent. I would recommend to a family or friend.
very satisfied with products. Thank you
nice light very bright very good quality
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.