Hi Thomas! The distance from the center of the hitch pin hole to the center of the ball on the #BW77BR is 13-5/8". This is designed to fit a 2-1/2" receiver with a 10k rating for the 2" and 21k rating for the 2-5/16" ball. What…
It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…
Hello Ben, Thanks for writing in! Yes! The WeatherTech Front Auto Floor Mats #WT54TZ you were looking at are made specifically for the factory vinyl floor in your 2026 Ram 2500. For the rear, WeatherTech does not have a matching custom-fit rear mat…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…
Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…
Hi Tracy, The etrailer Replacement Fabric for etrailer Slide-Out Topper part #e65QV is 96" wide (8ft) and 48" (4ft) deep. It will work with etrailer brand and Solera slide out toppers. The replacement fabric is also packaged with poly cord.…
Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Thanks for your question Brian. I've included a graphic showing the hole spacing for the mounting bracket on #ARK79FR. Of note, this jack does not include the hardware or a backing plate in order to mount it to your trailer frame. It is meant to…
Hey Noah, so the vertical bike racks like the Thule Revert #TH73VA are so tall they end up putting quite a bit more leverage and torque on the hitch they are installed in. This is why Curt doesn't want you to use them with their hitches like the…
Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…
Hi Thomas! The distance from the center of the hitch pin hole to the center of the ball on the #BW77BR is 13-5/8". This is designed to fit a 2-1/2" receiver with a 10k rating for the 2" and 21k rating for the 2-5/16" ball. What…
It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…
Hello Ben, Thanks for writing in! Yes! The WeatherTech Front Auto Floor Mats #WT54TZ you were looking at are made specifically for the factory vinyl floor in your 2026 Ram 2500. For the rear, WeatherTech does not have a matching custom-fit rear mat…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…
Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…
Hi Tracy, The etrailer Replacement Fabric for etrailer Slide-Out Topper part #e65QV is 96" wide (8ft) and 48" (4ft) deep. It will work with etrailer brand and Solera slide out toppers. The replacement fabric is also packaged with poly cord.…
Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Thanks for your question Brian. I've included a graphic showing the hole spacing for the mounting bracket on #ARK79FR. Of note, this jack does not include the hardware or a backing plate in order to mount it to your trailer frame. It is meant to…
Hey Noah, so the vertical bike racks like the Thule Revert #TH73VA are so tall they end up putting quite a bit more leverage and torque on the hitch they are installed in. This is why Curt doesn't want you to use them with their hitches like the…
Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Bent pin hitch pins and clips keep bike racks, ramps, and trailers secured without fuss. If your 2" class 5 or a recessed factory receiver leaves a 2.5" span too tight for the clip, look for extra long options and match the pin diameter—some setups use 1/4". Also check chain-loop clearance so the pin or clip doesn't crowd your safety chains.
No, these locks permanently learn the first key used and cannot be reset. Plan to sell the locks with the vehicle and get a new set for the next vehicle.
Yes, etrailer locks can be ordered keyed alike so you only keep track of a single key. Select the keyed alike option on each lock. If you're mixing receiver and coupler locks, choose keyed alike on both so they match.
Pick a locking bent pin for added security. They also help avoid the spring cotter style clips and the banged knuckles that can come with them. Some locking ends can wiggle a bit when locked, so check for a snug fit and confirm it doesn't crowd your safety chain loops.
It may be frozen tumblers. Use the straw on a can of WD-40 to direct lubricant into the lock core. Insert and remove the good key repeatedly to work it in, and reapply as needed until it frees up.
Yes, just match the usable pin span to your hitch. If your current pin's span is too short to get the clip on, choose an extra-long bent pin. Check for clearance around the receiver tube and safety chain loops so the clip or lock can be attached without interference.
Fits 1-1/4 and 2 Inch Hitch
Fits 2 Inch Hitch
Fits 5th Wheel Hitch
Filters
