Hitch Pins and Clips

It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…

Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…

Hi Tracy, The etrailer Replacement Fabric for etrailer Slide-Out Topper part #e65QV is 96" wide (8ft) and 48" (4ft) deep. It will work with etrailer brand and Solera slide out toppers. The replacement fabric is also packaged with poly cord.…

Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…

Hey Christian, Yes, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL29DR will fit your 2016 Ram 2500 Crew Cab with running boards as long as you have a factory hitch receiver or no receiver at all. If your 2016 Ram 2500 Crew Cab with…

Hey Chris! The etrailer Trailer Hitch Pin and Clip #e45TR doesn't have an actual rating. This is designed to work with accessories up to Class V and in general it can handle whatever your hitch can. That being said, it looks like the AirSafe…

Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…

Hey Scott! Yes, there is an option that will work with your 20" spare. The Draw-Tite Trailer Hitch Receiver #DT45508 does not have the same spare tire size restriction as the Curt. This is also a Class V hitch with a 2-1/2" receiver and a…

Hey Sue! It looks like your 2026 Subaru Crosstrek Premium has the same frame and mounting holes as the US model so you can use an aftermarket hitch. I recommend our own etrailer Trailer Hitch Receiver #e98912 which fits gas and hybrid models. This is…

Hey Kerri. The Replacement Fabric item #e96QV is going to be white when it's rolled up. This black fade fabric is designed to replace the ones on 15' wide awnings like our etrailer item #e24QV. What kind of awning do you have and what color…

It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…

Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…

Hi Tracy, The etrailer Replacement Fabric for etrailer Slide-Out Topper part #e65QV is 96" wide (8ft) and 48" (4ft) deep. It will work with etrailer brand and Solera slide out toppers. The replacement fabric is also packaged with poly cord.…

Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…

Hey Christian, Yes, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL29DR will fit your 2016 Ram 2500 Crew Cab with running boards as long as you have a factory hitch receiver or no receiver at all. If your 2016 Ram 2500 Crew Cab with…

Hey Chris! The etrailer Trailer Hitch Pin and Clip #e45TR doesn't have an actual rating. This is designed to work with accessories up to Class V and in general it can handle whatever your hitch can. That being said, it looks like the AirSafe…

Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…

Hey Scott! Yes, there is an option that will work with your 20" spare. The Draw-Tite Trailer Hitch Receiver #DT45508 does not have the same spare tire size restriction as the Curt. This is also a Class V hitch with a 2-1/2" receiver and a…

Hey Sue! It looks like your 2026 Subaru Crosstrek Premium has the same frame and mounting holes as the US model so you can use an aftermarket hitch. I recommend our own etrailer Trailer Hitch Receiver #e98912 which fits gas and hybrid models. This is…

Hey Kerri. The Replacement Fabric item #e96QV is going to be white when it's rolled up. This black fade fabric is designed to replace the ones on 15' wide awnings like our etrailer item #e24QV. What kind of awning do you have and what color…