Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches

Ask the Experts about this Master Lock Trailer Hitch Lock

• Locking Hitch Pins For 2" and 1-1/4" Hitch Receivers That Are Keyed Alike
  There are two different sized pins that come with the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches part # 2866DAT. One pin works with a 1-1/4" hitch receiver and the other works with 2" hitch receiver. They will use two different keys on the same key ring. The Master Lock Hitch Receiver and Coupler Latch Lock Set part # 2848DAT also comes with a lock for a 1-1/4" hitch receiver and a 2" hitch receiver but they both use the same key. However it sounds...
  view full answer...
• Trailer Hitch Lock Recommendation for 2014 Ram 1500 with Factory Hitch Receiver
  Unless you have a separate use for an 1-1/4" hitch receiver lock, you will only need one hitch lock for the 2" factory hitch on your 2014 Ram 1500. The Fastway Trailer Hitch Receiver Lock # FA86-00-3050 is my personal favorite for a couple of reasons. The barrel style key offers much better security than standard flat key mechanisms since they are almost impossible to drill or pick. Also, there are replacement keys readily available if you ever find yourself in a situation where you're...
  view full answer...
• Is The Master Lock Hitch Receiver Lock Compatible With Ball Mounts For 2 Hitches
  The Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches Item # 2866DAT is compatible with Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Drop - 5,000 lbs Item # C45131. It comes with both pins to fit 1/2" and 5/8" hitch pin holes.
  view full answer...
• Do Hitch Pins and Hitch Lock Have Trailer Weight Ratings
  Standard hitch pins like # PC3 and hitch locks like # 2866DAT do not have specific trailer weight capacities because all of them are capable of towing more weight than any trailer hitch they will fit. You do not need to have any concerns with the weight capacity of a hitch pin or lock.
  view full answer...
• Compatability of Hitch Locks With Draw-Tite Class 3 Hitch On My 2006 Honda Pilot EX
  I checked our records and you purchased the Draw-Tite Class III Max-Frame Trailer Hitch, item # 75599. Either of the hitch locks that you have selected, # 2866DAT and # 1480DAT will work with your 2 inch receiver hitch, in the second hole. The first hole in the receiver of your hitch is designed for a J-Pin Stabilization Pin and Barrel Lockset for 2" Trailer Hitches, item # 63201, and is not designed as the attachment point for the bike rack hitch pin. You will need to install the bike...
  view full answer...
• Where to Measure to Determine if Span of Hitch Lock 2866DAT Is Long Enough
  The usable span of the # 2866DAT that you referenced is 2-3/4 inches. You would need to measure the width of your hitch to know if that would be enough. Most likely it would be pretty close.
  view full answer...
• One Hitch Lock for 1-1/4 Inch and 2 Inch Trailer Hitches
  We do not have a locking pin with a sleeve but I do have an awesome recommendation for you. Since you would have to keep track of the sleeve any way you could use Master Lock lock set # 2866DAT. It has a 1/2 inch pin and a 5/8 inch pin that use the same lock. Instead of storing a sleeve somewhere you would be storing the pin that isn't being used.
  view full answer...
• Locking Hitch Pin for Factory Trailer Hitch on a 2010 Ford Explorer
  The design of Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches Item # 2866DAT does sound like the style that you would need to use with your 2010 Ford Explorer factory trailer hitch. That is unless I am thinking of the opposite problem in which case you would use a traditional flush lock such as # e98880 for 2 inch hitches or # e98879 for 1-1/4 inch hitches. I have linked videos of these locks for you. If you do not think the swivel head or flush locks will work...
  view full answer...
• Locking Hitch Pin and Anti-Rattle Device for the Brophy Hitch Adapter # HT5R
  I do have a solution for you to add a locking hitch pin and an anti-rattle device to your Brophy Hitch Adapter # HT5R but since it has a solid shank that isn't threaded the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 won't work properly like it does with your Thule T2 Pro XTB # TH9034XT. Instead what you will need to do is use the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT and the Roadmaster Quiet Hitch # RM-061-125 to lock and...
  view full answer...
• Hitch Sizes Compatible with North Carolina Tar Heels "NC Logo Trailer Hitch Receiver Cover CTH9S
  You are correct that the Siskiyou North Carolina Tar Heels "NC" Logo Trailer Hitch Receiver Cover # CTH9S does fit most 1-1/4-inch Class II and 2-inch Class III hitches. I both checked with the manufacturer and took a look at our inventory and two sets of brackets are indeed included, as shown in the photo. If you want a lock to protect this cover from theft I suggest hitch lock # 2866DAT which will fit both hitch sizes.
  view full answer...
• Does Master Lock Hitch Lock Fit Curt Ball Mount for 2 Inch Hitch
  Thanks for the purchase of the Curt Ball Mount for 2" Hitches # C45070, and the lock you mentioned - the Master Lock Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT - is absolutely compatible with the Curt ball mount.
  view full answer...
• Metal Ford Trailer Hitch Cover Options for 2 inch Hitch Receiver
  The Ford Logo Trailer Hitch Receiver Cover # PC002236 that you were looking at is all metal and you can use the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT to secure it to your hitch receiver. If you'd like something that doesn't require assembly then we have the Stainless Steel Cover # AUT-FOR-C.
  view full answer...
• How to Install ToyLok Mounted Retractable Cable Lock to 4x4 Bumper on 2020 Alpha Wolf
  The U-Bolt mounting kit that comes with the ToyLok ATV/UTV Mounted Retractable Cable Lock # LC337120-337114 can be found separately as part # LC337114. To mount this to your bumper you'll have to get a bit creative because the U-Bolts are designed to fit 3/4" - 1" ATV-UTV racks so there is no way that they will wrap around your 4" square bumper if that's what you had in mind. Another solution would be to install a hitch receiver on your 4" square bumper, like the Curt # E-100, and then...
  view full answer...
• Availability of Equal-i-zer Part # 90-00-0600 and Locking Hitch Pin
  The Equal-i-zer part number you referenced is our part # EQ37060ET which is an entire weight distribution system rated for a tongue weight range of 200 lbs - 600 lbs. For a locking hitch pin to use with it the # 2866DAT is an easy to use and solid choice.
  view full answer...
• Compatibility of Draw-Tite Sportframe Trailer Hitch # 24826 With Curt Cargo Carrier # C18110
  The Draw-Tite Sportframe Class I Trailer Hitch # 24826 is indeed a correct fit for your 2009 Honda Fit. This hitch will install without drilling using the included hardware but some trimming of part of the wheel well is needed for a secure fit. The Curt Cargo Carrier # C18110 that you referenced is fully compatible with this Class I hitch. Before loading up your cargo I suggest you check your Fit owner's manual to confirm the vehicle's tongue weight capacity (the weight loaded on its...
  view full answer...
• Replacement Locking Hitch Pin for Subaru Bicycle Rack Made by Yakima
  Yakima did make the Subaru-branded bike rack but they do not offer any replacement parts directly; these proprietary parts can only be purchased from Subaru. Your Forester could be equipped with either a 1-1/4-inch or a 2-inch hitch receiver. The diameter of the hitch pin will be 1/2-inch for 1-1/4-inch hitches or 5/8-inch for 2-inch hitches. You can measure the size of the receiver opening on your hitch (or the hitch pin hole itself) to determine which size pin you need. If your...
  view full answer...
• Cargo Carrier And Hitch For 2011 Chrysler 300 To Carry Folding Wheelchair
  If you do not have a hitch on your 2011 Chrysler 300, I recommend a hitch and a cargo carrier. After doing some research on your vehicle I found that the towing weight capacity is 1,000 lbs. that means the maximum tongue weight capacity or total weight a hitch could handle is approximately 100 lbs. I recommend the Draw-Tite Trailer Hitch, part # 36548. This is a Class ll hitch and has a 1-1/4 inch receiver opening. I also recommend a flat hitch-mounted cargo carrier like the Rola...
  view full answer...
• Locking Hitch Pin Recommendation for Use with Curt Cargo Carrier # C18110
  For a locking hitch pin to use with the Curt Cargo Carrier part # C18110 the Swivel Head Lock aprt # 2866DAT would be a great option confirmed to fit. I attached a review video for this lock for you to check out as well.
  view full answer...
• Hitch Cargo Carrier, Cargo Net & Hitch Lock for 2014 Fiat 500L
  The hitches made for your 2014 Fiat 500L are the light-duty Class I type and in one of these you will need to use a Class I-compatible hitch-mount cargo carrier. One thing to keep in mind is that the combined weight of your chosen carrier and what you load onto it cannot exceed the hitch tongue weight (TW) rating of 200-lbs. This means that a good choice will be one of the lighter carriers that will not use up too much of the hitch capacity. The Curt hitch carrier # C18110 weighs in...
  view full answer...
• Available Military Theme Hitch Covers
  We sure do! We have hitch covers for all branches of the military and public service, and also for college and pro sports teams, vehicle brands, hobbies and many other interests. You can see all military-related hitch covers using the link provided. The other link will display every theme of hitch cover we offer. You can click on the hitch size you have to see the covers that will fit. For example, for a Navy Seal hitch cover we offer items like # AMG102397 which fits 2-inch hitches. For...
  view full answer...
• Recommendation for a Hitch Mounted Cargo Carrier on a 2017 Subaru Forester
  I found a cargo carrier that will fit your 2017 Subaru Forester. The Curt Cargo Carrier, # C18110, is rated for both Class I and Class II trailer hitches that use the 1-1/4 inch hitch receivers. This cargo carrier weighs 30 lbs, which will allow you up to 170 lbs of cargo.Your Subaru's tongue weight rating is at 200 lbs according to the 2017 Forester Owner's manual. I also recommend the Trailer Hitch Receiver Lock, # 2866DAT, to secure your cargo carrier to the hitch of your Forester. I...
  view full answer...
• Hitch Cargo Carrier Recommendation for Use in Curt Hitch C11303 on 2014 Hyundai Elantra Sedan
  We can help you select a suitable hitch-mount cargo carrier for use in the 1-1/4-inch Class I hitch on your 2014 Elantra sedan. Please note that the carrier you referenced will not work in your particular hitch but we have four other options for you. Please click on the link provided to see all Class I-compatible fixed (non-folding) hitch cargo carriers. From among these the one I suggest you consider is the Curt Hitch Cargo Carrier # C18110, because it offers 3-3/4-inches of height...
  view full answer...
• Diversi-Tech Hitch Lock Recommendation for a 1-1/4 Inch Hitch
  For a lock for your 1-1/4 inch hitch I would recommend you get lock set # 2866DAT. The Blue Ox Base-Plate-to-Tow-Bar Lock # BX8859 that you referenced is designed to be used as a lock for base-plates to tow-bars. While it could possibly be used as a hitch lock, I would not recommend you use it as one since it has never been tested for that.
  view full answer...
• Recommended Hitch Mounted Platform Carrier For 2013 Kia Sorento SX
  The lightest carrier we offer that has the biggest shank rise and will fit hitches that are either 1-1/4 or 2 inches is the Curt Hitch Cargo Carrier, part # C18110. This carrier has a 3-3/4 inch shank rise. Since this will fit both Class ll and Class lll hitches, this may work well for your 2013 Kia Sorento. This carrier weighs only 30 lbs and has a weight capacity of 300 lbs. If you want to secure the carrier to the vehicle hitch, I recommend a Hitch Receiver Lock, part # 2866DAT....
  view full answer...
• Compatible Trailer Hitch Lock for a Class I CURT Trailer Hitch and Surco Cargo Carrier
  The CURT Trailer Hitch, # 11110, is a Class I trailer hitch with a 1-1/4 inch receiver. It uses a 1/2 inch diameter hitch pin hole. All of the locks you have mentioned # 2866DAT, and # 7682 will all fit it. They will also fit the Surco Cargo Carrier, # 52017. Out of the 3 locks, I would go with # 5200. These are among our best selling locks. For the trailer hitch, CURT requires the use of a stabilizer strap, # 18050, on any non-trailer load (such as a cargo carrier or bike rack)...
  view full answer...
• Which Locking Hitch Pin For Swagman Original 3 Bike Rack
  I have another option but since the Swagman Original 3-Bike Rack # S64152-2 uses a threaded anti-rattle hitch pin the Swivel Head Trailer Hitch Receiver Lock # 2866DAT will not work. The correct locking hitch pin is the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks # S64027. I included a video for the # S64027 for you to take a look at.
  view full answer...