Hey Eric, thanks for reaching out. I went out to our warehouse and measured the Demco eZ-Latch Gooseneck Coupler #DM43KV. From the bottom edge of the coupler to the center of the first adjustment hole was 10-3/4". Then the adjustment holes are…
Hello Jerry, Great question. It all depends on on if it is compatible. If your current set up is not a topwind coupler then it isn't going to work because the #GCSQTW-30008 does not use traditional pin-adjustment holes (please refer to picture I…
Hello David, thanks for reaching out. The Curt Offset Ball #C68ZV will fit the 2024 GMC 2500, but it will only work on the 8' bed models. If you have the short bed, an additional piece, Curt part #60669 is required. The problem is this part will…
Hi Kenneth; the covers are different between bed sizes on your 2024 Ford F-350. The #PE66QJ and #PE87QJ you looked at will only fit the 8' bed. For the same covers on the 6-3/4' bed you need the #PE46QJ or #PE77QJ.
The 205/75-15 tire and wheel combo is 27.1 inches in diameter, which would be the largest diameter available that doesn't exceed 27.5 inches. The maximum capacity for these tires is a load range D tire which have a capacity of 2,150 lbs at the…
Hey Connor, there is no integrated lock for the Demco eZ-Latch Gooseneck Coupler #DM73KV but you can use the InfiniteRule Lock for Demco eZ-Latch Trailer Couplers #IR66FR to lock it, no Gooseneck coupler lock necessary. What kind of trailer do you…
According to my available research, you are referring to the aluminum and vinyl version of the Pace-Edwards Switchblade Tonneau Cover your 2022 Ford F-350 Super Duty with a 6-3/4 foot bed. This is the #PE46QJ (Pace-Edwards part number SWF176). We…
Hey Rick, thanks for reaching out! The Replacement Part #AM3101 is designed specifically for the Ranch Hitch. You might be able to customize it to fit your gooseneck coupler, but I don't have any insight into whether that would actually work, and…
So long as you do not have a dually the answer is yes. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL29DQ are compatible with in bed hitches like the B&W item #BW73FR when installed on a 2025 Ford…
The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…
Hey Eric, thanks for reaching out. I went out to our warehouse and measured the Demco eZ-Latch Gooseneck Coupler #DM43KV. From the bottom edge of the coupler to the center of the first adjustment hole was 10-3/4". Then the adjustment holes are…
Hello Jerry, Great question. It all depends on on if it is compatible. If your current set up is not a topwind coupler then it isn't going to work because the #GCSQTW-30008 does not use traditional pin-adjustment holes (please refer to picture I…
Hello David, thanks for reaching out. The Curt Offset Ball #C68ZV will fit the 2024 GMC 2500, but it will only work on the 8' bed models. If you have the short bed, an additional piece, Curt part #60669 is required. The problem is this part will…
Hi Kenneth; the covers are different between bed sizes on your 2024 Ford F-350. The #PE66QJ and #PE87QJ you looked at will only fit the 8' bed. For the same covers on the 6-3/4' bed you need the #PE46QJ or #PE77QJ.
The 205/75-15 tire and wheel combo is 27.1 inches in diameter, which would be the largest diameter available that doesn't exceed 27.5 inches. The maximum capacity for these tires is a load range D tire which have a capacity of 2,150 lbs at the…
Hey Connor, there is no integrated lock for the Demco eZ-Latch Gooseneck Coupler #DM73KV but you can use the InfiniteRule Lock for Demco eZ-Latch Trailer Couplers #IR66FR to lock it, no Gooseneck coupler lock necessary. What kind of trailer do you…
According to my available research, you are referring to the aluminum and vinyl version of the Pace-Edwards Switchblade Tonneau Cover your 2022 Ford F-350 Super Duty with a 6-3/4 foot bed. This is the #PE46QJ (Pace-Edwards part number SWF176). We…
Hey Rick, thanks for reaching out! The Replacement Part #AM3101 is designed specifically for the Ranch Hitch. You might be able to customize it to fit your gooseneck coupler, but I don't have any insight into whether that would actually work, and…
So long as you do not have a dually the answer is yes. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL29DQ are compatible with in bed hitches like the B&W item #BW73FR when installed on a 2025 Ford…
The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Explore robust gooseneck couplers designed for 30,000 lbs GTW. Perfect for heavy-duty trailers, these couplers offer durability and performance. Ideal for enthusiasts who need reliable towing solutions.
Some users note that adjustment holes may be off-center, causing a crooked appearance. However, this doesn't affect performance and can be adjusted during installation for a better fit.
These couplers are designed to absorb shock and vibration, providing a smoother towing experience. They help protect your trailer and cargo from road impacts, making them a great choice for heavy-duty use.
A rounded surface disperses weight better, reducing deformation on the ball and easing removal. Flat surfaces may cause more wear but can still perform well if designed properly.
Many couplers come unpainted, which means no paint to grind off or breathe in. This allows for customization or immediate use without worrying about finish wear over time.
This rating ensures the coupler can handle heavy loads, making it suitable for large trailers like horse or flatbed trailers. It provides peace of mind knowing your coupler can manage the weight safely.
Filters
