Can I Take the Inner Tube of the Ram Gooseneck # GCSQTW-30008 and Put it in My Outer Tube on Trailer

Updated 02/23/2025 | Published 02/16/2025

Products Featured in This Question

Ram Gooseneck Coupler - Topwind - 7" Adjustment - Square - 2-5/16" Ball - 30K

(315)

$276.73

Demco eZ-Latch Gooseneck Coupler - Square Inner Tube - 2-5/16" Ball - 30K GTW

(47)

$222.73

Question:

I purchased a gooseneck with a square ram receiver. It is one that has the spinner adjustment on top. For some reason the replaced the inner tube with one that was not for this type of receiver. I did not have the ability to connect the spinner. Anyway, I ordered a entire new receiver from etrailer. My question is, can i just take the inner tube from the new one and put it in the outer tube that is already welded on the trailer? Seems like is should but thought i would ask anyway.

asked by: Jerry

Expert Reply:

Hello Jerry,

Great question. It all depends on on if it is compatible. If your current set up is not a topwind coupler then it isn't going to work because the # GCSQTW-30008 does not use traditional pin-adjustment holes (please refer to picture I attached) like other gooseneck couplers. Instead, it relies on the spinner nut mechanism at the top to secure and adjust the height of the inner tube. If you find that it is not compatible please let me know so I can have someone from customer service reach out with a return label. Then you can purchase something like the Demco eZ-Latch Gooseneck Coupler # DM43KV which does have the adjustment holes.

What kind of coupler do you currently have on there?

expert reply by: Kate F

Arrow Showing Adjustment Hole on Gooseneck Coupler Inner Square Tube
(click to enlarge)

Jerry B.

2/20/2025

I have one that has the spinner on top. But the inner part is not the original and is not the spinner. Hope this makes sense.

Kate F.

2/23/2025

@JerryB I think I am understanding Jerry. If the inside of the one you received is the same as the one on the trailer, then you are good to swap it over. But, if the 2 parts you received from us do not work together, if you send me some pictures I can get a label sent to you to return for a full refund. Please let me know.