Recommended Lock for the Demco eZ-Latch Gooseneck Coupler Adapter

Question

Question:

Is this demco gooseneck auto latch coupler lockable to prevent theft? I would prefer a tube that has a lockable function either integrated or by simply attaching an external lock in a hole on it, I’m trying to avoid a separate “gooseneck coupler lock” on a non-locking coupler. Thanks for the help

asked by: Connor G

0

Expert Reply:

Hey Connor, there is no integrated lock for the Demco eZ-Latch Gooseneck Coupler # DM73KV but you can use the InfiniteRule Lock for Demco eZ-Latch Trailer Couplers # IR66FR to lock it, no Gooseneck coupler lock necessary.

What kind of trailer do you have? If you have any other questions, please feel free to drop a comment and let me know!

expert reply by: Bryce D

0

Jameson C.

10/30/2025

Hey Connor, did the InfiniteRule lock work well with your Demco eZ-Latch gooseneck coupler? Knowing how it fit could help others looking for a simple way to secure their setup.

Reply

Answer 1

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 2

Hey Philip. I do appreciate you reaching out but we do not have a way to look up an Airstream VIN, so I am afraid we are not going to be of much help here. I suppose you could try measuring the box to verify what model you actually have. There should…

view full answer...

Answer 3

Hello Danny, Does that mean that your trailer is bigger than all the others, just like everything else in Texas..... bad joke, I know. I have not heard of any issues with the Texas Pride and not being able to use the Demco eZ-Latch Gooseneck Coupler…

view full answer...

Answer 4

Hello James, thanks for reaching out. Yes, there is an option for the 18K BTU Chill Cube unit that comes with a thermostat that controls both the furnace and the AC. What you will need is the following: - Furrion Chill Cube RV AC w Air Distribution…

view full answer...

Answer 5

Hey Dennis, you can definitely replace your current AC units with Chill Cubes but you should note that all of the Chill Cubes are rated at 18k btu. So if you have a roof ducts you'd want the part #FR49TD or if there aren't any ducts you'd…

view full answer...

Answer 6

Hi Nathaniel, Great choice on switching to the Furrion Chill 18,000 BTU! You're going to love the performance and efficiency it brings. One of the biggest advantages of the switch is that Furrion has upgraded their refrigerant from R410A to the…

view full answer...

Answer 7

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 8

Hello Dave, The issue that I am running into is the width, and finding something in aluminum. The options we carry are 10" wide, in either cold rolled steel or galvanized. Here are the part numbers we have available: - Single Axle Jeep Style…

view full answer...

Answer 9

Hello Jerry, Great question. It all depends on on if it is compatible. If your current set up is not a topwind coupler then it isn't going to work because the #GCSQTW-30008 does not use traditional pin-adjustment holes (please refer to picture I…

view full answer...

Answer 10

To add a 5th wheel hitch to your short bed 2024 Ram 2500, I recommend the B&W Companion with Slider item #BWRVK3670. This 5th wheel hitch has a 20,000 lbs capacity and will mount directly to the puck system for easy installation and removal. It…

view full answer...

Recommended Lock for the Demco eZ-Latch Gooseneck Coupler Adapter

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching