Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch

Part Number: C58001

In Stock

$15.42

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt accessories and parts brackets 4 flat 5 c58001

curt accessories and parts brackets 4 flat 5 easy mount bracket for 4- or 5-way trailer connector - 2 inch hitch

curt accessories and parts trailer wiring mounting hardware

curt accessories and parts trailer wiring brackets easy mount bracket for 4- or 5-way flat connector - 2 inch hitch

Show All (4) Product Images

Show Fewer Product Images

In Use/Installed

0 accessories and parts curt trailer wiring brackets c58001

0 accessories and parts curt trailer wiring mounting hardware easy mount bracket for 4- or 5-way flat connector - 2 inch hitch

0 accessories and parts curt mounting hardware brackets c58001

2011 chevrolet silverado accessories and parts curt trailer wiring brackets easy mount bracket for 4- or 5-way flat connector - 2 inch hitch

0 accessories and parts curt trailer wiring brackets easy mount bracket for 4- or 5-way flat connector - 2 inch hitch

2011 chevrolet silverado accessories and parts curt mounting hardware brackets c58001

2011 chevrolet silverado accessories and parts curt trailer wiring brackets c58001

Show All (7) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch customer photo

Show All (16) Customer Images

Show Fewer Customer Images

Videos

An In-Depth Look at the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector

What to Know About the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector

Clean Up Your Trailer Wiring

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required. 1-800-940-8924 to order CURT accessories and parts part number C58001 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch. Accessories and Parts reviews from real customers.

All Info
Reviews (115)
Q & A (0)
Related Parts
Photos

CURT Accessories and Parts - C58001

Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required.

Features:

Electrical bracket lets you mount your trailer connector to your hitch quickly and easily
- Holds (1) 4-way or 5-way flat connector
- Fits 2" x 2" trailer hitch receivers
Sturdy steel construction is long-lasting
Black powder coat finish resists corrosion
Notched design allows for access to pin and clip or hitch lock
Fast, simple, no-drill installation
- Fit bracket over hitch receiver opening and secure around lip with included hardware

Specs:

Overall dimensions: 6-1/8" wide x 3-1/4" tall x 1-1/8" deep
Diameter of mounting hole: 1-3/4"

58001 Curt Easy Mount Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat Plugs

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

Wrong item was ordered
Did not arrive in time
Too difficult to install

2% of customers were not satisfied

Wrong item was ordered
Did not arrive in time
Too difficult to install

4.8

115 reviews

5 Stars		(97)
4 Stars		(12)
3 Stars		(2)
2 Stars		(4)
1 Star		(0)

by: Creigh 04/27/2026

Fit perfect on the hitch. Needed longer bolts to secure the vehicle flat plug, as it was thicker than a standard plug.

Click to Enlarge

by: John Doe 02/06/2026

Well designed and works well once installed. Depending upon the weld design, it might be a challenge for some. I had to bend the bolts to clear the welds on my Ranch Hand bumper.

Click to Enlarge

by: Sam 05/10/2025

Easy to install. Feels heavy duty. Hopefully enough to withstand abuse from a carwash and snow or rain splash.

Sam One Year Later

5/11/2026

Connector has worked great. There have been no continuity problems.

Claire H.

5/11/2026

@Sam Nice, glad it’s working great for you! Always good to hear no issues

by: Jim B. 06/20/2019 One Year Later

The bracket fit the receiver hitch and keeps the electrical plug from dragging or coming loose. When I tightened the lower retainer, the flat 4-prong plug was loose. As I re-tightened the retainer mounting bolts, it (the end of the retainer) began to bend slightly. See attached pic. Using a heavier or stronger gage metal will prevent this bending. Overall, I still give it 5 stars as I have had no problems with the plug falling onto the ground. Properly tightened, it holds the plug. I would recommend this product to everyone who has had a wiring plug falling onto the ground and being dragged drag on the ground

Click to Enlarge

by: Chris 03/05/2024

Ahh I absolutely love this product! I actually reached out to etrailer asking about running the trailer wiring not out of the trunk and I was recommended this bracket. Super easy to install. The directions recommended bending the lower flange to make a tighter fit around the hitch. Blah. I did this initially and I didn’t like the way it fit because it kind of bowed out. I straightened it back out and added a spacer. The spacer is great in my opinion. Once tightened down they made for a perfect fit. Super easy to use. Great product. Love the more flush look of the pin. Way to go!

Click to Enlarge

by: Seth 08/24/2026 One Year Later

Works well. Easy to install and stays in place.

by: Ron 05/16/2021

Great product to complement new electrical wiring for my hitch. It holds the wire securely in place for when it’s needed.

Click to Enlarge

by: Devin 04/16/2026 One Year Later

It's a great way to secure wires and it keeps everything looking tidy and intentional.

by: Steve 04/23/2018

Works great! Install was simple. Now the flat connector doesn't dangle :)

Click to Enlarge

by: Emil 03/04/2026

Great mounting bracket for the flat four plug. Keeps it secure and close to the vehicle. Just need to put the spacers on different ways to get the fit right. When tightening it up be sure they are in position so you don’t distort the bracket.

by: Austin W. 03/23/2026

This is a really elegant solution for keeping the wires nice and neat.

by: Tracy 03/04/2026

You guys have the best customer service I have ever seen. Keep it up, your great Americans. All your products so far have been excellent.

by: Ed 09/20/2018

Good product but not for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III on a Town & Country. Because the hitch fits tight against the bumper this does not fit. I was in a time crunch to travel, so I kept it and made it work by bending it and pushing the bumper up so I could slide it on the hitch.

Ed One Year Later

1/13/2020

No issue, the way I had to bend it for it to fit has work out fine, and no issues with the bumper even though it pushes the bumper up a little.

by: John E. 05/10/2025

Installed with a Curt brand hitch on a 2025 Kia Sportage SX-Prestige Hybrid, and when it gets tightened the outer frame tends to bend a bit causing a gap.
Otherwise it is a decent product.

by: Richard W 04/23/2018

I purchased the Curt trailer wiring harness about 2 yrs ago. I didn't like having it running out the back hatch. I use my trailer a lot. I purchased the Curt 58001 mounting brkt. I reviewed the wiring install video and saw the grommet that you normally use for the power line to the harness from the battery. Now I had the hole to run the trailer connector wiring thru with out make another hole and having to splice the connector wiring.
I cut a slot in the middle of the grommet for the wire and then continued to cut the grommet so I could slip the wire to the center of the grommet, put on some liquid electrical tape and ran the wire to the bracket. As waterproof as original. Mounting bracket made a nice, practical connection point. I greatly appreciate your videos and etrailer is my go to source.

by: bertman 10/06/2017

Fits as stated and seems to be good quality. Installs in about 5 minutes
Even if the nuts loosen over time the part won't fall off unless the bolts completely fall out.

Click to Enlarge

by: Eric F 12/15/2016 One Year Later

The mount bracket is a great way to finish the hitch project; includes a hard mounting point for the light assembly from the vehicle. The hard mounting point makes attaching/detaching the male/female ends of the light cables a snap. The bracket has been on my vehicle for a year without any issues.

by: Jonathan G. 03/08/2015

Very easy to install. Great solution to a common problem.

Click to Enlarge

by: Morgan A. 09/09/2018

Perfect solution for conveniently & safely mounting trailer wiring for a 2" hitch receiver! Very quick & easy to mount, solid, and helps keep wiring above safety chains. I looked at several other mounts that are clamped to the receiver, but this is much easier.

by: Mark 10/21/2024

Good fit for my 2020 Mazda CX 9. 4 pin flat wiring harness fits in between the brackets. Not sure what the extra solid brackets with two holes in them were for. The limited directions didn't list them. Otherwise a good product.

by: Jonathan 11/28/2020

I've been blown away by every Curt product I've bought. This one didn't disappoint. The metal is heavy and strong, the powder coat is thick and indestructible, the fasteners are stainless and exactly right, and the product itself is a great solution to the problem of mounting the trailer electrical connector.

by: Ronald 11/26/2024

I installed the bracket on my new etrailer hitch. The install was quick and easy. It looks good and works great.

by: Matthew 10/07/2018

I already recommended this to all of my family. It's great having your wiring harness fixed in one place. It makes plugging in easy, but it will also save your wiring from the stress of the road. I didn't want any rattling on the road so I cut some vinyl tube to fit over one of the carriage bolts. I could vinyl both bolts on one receiver and only one carriage bolt on the other, so use as you see fit.

by: Donald 10/05/2019

I just installed the hitch and wiring harness today(Saturday). I thought I followed the video to the T but my car lights didn’t work. I called and they told me it would be Monday. I was disappointed but understood. Three hours later I get a call and they walked me thru my mistake. What great customer service this was my third purchase and if I need more they will get my business!

by: Anthony F 11/21/2024

I like the idea of this mounting bracket. Still working with the pressure applied to keep the wire harness from moving.

115

true

Show More Reviews

See what our Experts say about this CURT Accessories and Parts

Do you have a question about this Accessories and Part?

Can 2024 Subaru Outback Wagon Curt T-Connector 4-Way Be Ran Under the Vehicle
It makes perfect sense, and I completely agree with you Chris! The wiring manufacturers tell people to drape it over the tailgate as a simple solution, but the clean look and readily available access makes mounting the 4-Way connector next to your hitch receiver much more desirable. It looks like some of our other customers have been able to find a hole under the spare tire to route the Curt T-Connector 4-Way # C56040 through so that's what I recommend checking out on your 2024 Subaru...
view full answer...
Best Trailer Hitch For Towing A Small Trailer With A 2022 Kia Sportage
Hi Christopher! To tow a small trailer with your 2022 Kia Sportage, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e72TR you were looking at. The price is currently the best, and the matte black finish makes it blend in better than the gloss finish other manufacturers use. Plus it's American made, so it's the one to get! To power the lights on the trailer, you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer...
view full answer...
Recommended Hitch, Wiring Harness, and Mounting Brackets for a 2017 Toyota RAV4 Hybrid
Hey Shannon! I'll start by confirming that the EcoHitch Hidden Trailer Hitch item # 306-X7219 will fit the 2017 Toyota Rav4 Hybrid. Out of those two wiring harnesses, I recommend going with the Curt item # C56350 over the Tekonsha item # 118578 because of reliability. This custom-fit T-connector plugs into your Toyota's wiring harness, which is located in your rear cargo area. It will provide you with a 4-way connector. The Curt item # C42CR and item # C57202 are not going to be the...
view full answer...
Recommended Wiring Harness for a 2025 Subaru Outback and How to Run It to the Hitch
Hey Mike there should be a grommet under the spare tire that you can route the Curt Wiring Harness item # C56040 through. This was there on the previous models and we've had customers do what you're wanting successfully. You can use the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector item # C58001 to attach it to your hitch so it is in a safe accessible location. The Curt Wiring Harness item # C56040 is custom fit for the 2025 Subaru Outback. It plugs into your Subaru's...
view full answer...
Does The Curt Trailer Hitch Receiver Require Removal Of Dampening Rod On 2020 Lexus RX 450h F Sport?
The Curt Trailer Hitch Receiver # C13282 will mount to the same holes as the dampening rod on your 2020 Lexus RX 450h. So the dampening rod will be permanently removed from your Lexus. Since the main purpose of the dampening rod is to remove body flex, the receiver will do the same job once it is installed. For wiring you will need a 4-pole, you will need the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector# HM11141945 if you have the factory...
view full answer...
Mounting Option for Trailer Wiring on 2021 Lexus GX460
Hey Lisa! The Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT uses zero-contact interface sensors that clamp onto your vehicle’s existing taillight wires. The sensors read the signal through the insulation, so you never have to splice or tap into anything. It’s a clean setup that keeps your factory wiring fully intact. Have you installed any trailer wiring before? We have install videos on the product page to help, but if you haven't done it before it'll save you a headache...
view full answer...
Bracket to Get 4-Way Closer to Hitch on Toyota 4Runner
Hey Bryan, The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 will only work for your 2021 Toyota 4Runner if you have the factory 7-way. The cable you mentioned is a US Car connector and would plug into the back of the socket. If you don't have that and have a wired in 4-way, the best we can offer is a 4-way mounting bracket like the standard # 18144 or the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch # C58001 which installs on your...
view full answer...
Will the Curt 5-Way Mounting Bracket Work w/ the Hopkins Ergonomic 5-Way Flat?
No, I am sorry it will not Keith. The Curt Mounting Bracket for 5-Way Flat Trailer Connector item # C58303 is designed for a standard 5-flat connector like item # HM37908. The grips and the cover on item # HM47890 aren't going to fit inside the space on that bracket. Instead you'll want to use the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector item # C58001. This one mounts to your hitch receiver and sandwiches the connector into place so it'll have plenty of room. What...
view full answer...
Towing Set Up For A 2016 Jeep Cherokee Latitude With V6
Hi Brian! The parts you have listed will all work great on your 2016 Jeep Cherokee Latitude with the V6. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e62TR Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56208 Mounting Bracket 4-Pole Flat # 18144 I typically recommend the No-Drill Mount Bracket, Long # 18136 as it can make attaching the # 18144 bracket easier, but with how the hitch attaches to your Cherokee, I don't...
view full answer...
Installation of Trailer Wiring Harness on 2018 Lexus RX 350L
For your 2018 Lexus RX350L the wiring harness # 118255 is not a fit. You will use the harness # 118252 if you have the factory tow package. This harness will be near the hitch on the driver's side of the vehicle and this harness has a protective cap so it won't be as obvious a match until the cap is removed. If you don't easily find the wiring harness then it is likely you don't have the factory tow package. If you don't have the factory wiring, then I recommend the 4-Pole Trailer...
view full answer...
Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota Highlander
The main difference that you will see is the Curt Trailer Hitch Receiver # C45CR has a visible cross tube where the Curt Trailer Hitch Receiver # C99FR has a hidden cross tube. So when you have these mounted on your 2022 Toyota Highlander Limited you will either see just the receiver slot and chain loops that hangs down, or you will see the receiver and cross tube that attach to the mounting plates on the left and right frame rails. I have included images so that you can see the difference...
view full answer...
4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch Receiver
Currently the Vehicle Wiring Harness # C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most useful wiring as I see your CX-50 has a maximum towing capacity of 2,000lbs to 3,500lbs depending on your exact factory options. You can always check with your dealer to determine your exact towing capacity. A Mounting Bracket # C58001 will allow...
view full answer...
Trailer Hitch Recommendation for 2021 Ford Explorer
There won't be any different in fitment when it comes to trims for your 2021 Ford Explorer so I recommend going with the etrailer Trailer Hitch # e29YR because it has a matte black finish that blends in better with your vehicle trim and will do a better job at hiding any scratches from road debris than the other glossy finishes that other trailer hitches have. To round out your towing setup I recommend using the T-One Wiring Kit # 118599 because it's the most reliable (you'll need the...
view full answer...
Best Looking Trailer Hitch Receiver For a 2022 Chrysler Pacifica
The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT46GR is the best looking receiver for your 2022 Chrysler Pacifica. This is due to being the only receiver with a removable 2" receiver. When you are not towing or using the receiver for carrying a hitch mounted accessory you can simply remove the receiver by unlocking it from the main assembly. This will allow you to maintain the factory appearance when not in use. I recommend installing the T-One Vehicle Wiring Harness # TK96FR...
view full answer...
Parts Needed for Towing a Boat Trailer with a 2016 Mercedes-Benz GLE 350
The Curt Trailer Hitch Receiver # C13294 is a great choice for your 2016 Mercedes-Benz GLE 350. The receiver has a 2" square opening and is rated for up to 750lbs of tongue weight and a trailer weight up to 7,500lbs. Be sure to not exceed any weight ratings given from Mercedes on your GLE. Instead of using the Curt 4-Way # C59496 I recommend using the Tekonsha 5-Way Flat # 119177KIT. This kit allows you to draw power from the vehicle battery for the tail lights and reverse lights unlike...
view full answer...
How To Mount 4-Way Connector To 2020 Mazda CX-5 With Trailer Hitch Receiver
Absolutely! Starting with the harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118746 which is a plug and play harness confirmed to fit your 2020 Mazda CX-5. I included an installation video of the harness, but you will need to do it slightly different. You will need to cut a slot in one of the grommets in the floor of vehicle, allowing the harness to pass through underneath the vehicle. Then to mount the harness you can use the Curt Easy...
view full answer...
Recommended 4-Way Trailer Connector Mount for Hidden Crossbar Trailer Hitch
The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75600 for your 2018 BMW X5 does not have a designated mounting location for your 4-way trailer connector. So, for the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT which is a confirmed to fit option. You can run the 4-way connector out the same bumper hole as the hitch or create a separate hole. My recommendation is either use the Hopkins Knockout...
view full answer...
Does The Exhaust Have to Be Lowered When Installing Curt Trailer Hitch Receiver On 2022 Toyota RAV4?
The Curt Trailer Hitch Receiver # C13416 can be installed on your 2022 Toyota RAV4 Hybrid XLE without having to lower the exhaust. It will be easier to lift it into place with a 2nd set of hands to get around one of the exhaust tips and then the second. I recommend using a Nylon Brush # 814092 to clean out the threads on the frame nuts to prevent the chances of damaging the hardware during installation. I recommend installing the Curt Vehicle Wiring Harness # C56434 when you install the...
view full answer...
Location of Plug In Connectors For Curt Wiring Harness C56272 On a 2018 Ford Edge
All the 4-way vehicle wiring harnesses like the Curt T-Connector Vehicle Wiring Harness # C56272 that fit your 2018 Ford Edge will require connecting directly to the tail light connectors. If you plan to run your 4-way permanently outside your Edge I recommend using either the 2" Curt Easy Mount Bracket # C58001 or 1-1/4" Curt Easy Mount Bracket # C58002 to secure the 4-way on the end of your receiver. If you do not already have a receiver I recommend the Curt Trailer Hitch Receiver #...
view full answer...
Best Trailer Hitch For a 2022 Toyota Highlander
I recommend the etrailer Trailer Hitch Receiver, # e75ZR for your 2022 Toyota Highlander. along with the Tekonsha T-One Vehicle Wiring Harness, # TK99FR. Use the Mounting Bracket, # C58001 to secure the connector to the end of the receiver tube. The etrailer # e75ZR is a 2" x 2" Class III, fully welded trailer hitch receiver bolts onto your Toyota Highlander's frame with no welding required. The Tekonsha T-One Vehicle Wiring Harness, # TK99FR plugs directly into existing wiring providing...
view full answer...
Recommended 4-Way Vehicle Wiring Harness For a 2023 VW Taos
I recommend the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 for your 2023 Volkswagen Taos AWD. The Mounting Bracket # C58001 is a great way to secure the 4-way to the end of the Receiver # C38JR. This will reduce the chance of the connector being drug on the ground accidently.
view full answer...
Bumper Panel Modification Required for Trailer Hitch Receiver On a 2021 Lexus RX 350
When installing the Curt Trailer Hitch Receiver # C73DR on your 2021 Lexus RX 350 while there is no drilling required for installation, underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming a portion of the lower fascia panel may be needed to reattach panel or fascia. This could be something like a 3" x 3" hole that can be cut with a cut off tool or by using a small hack saw. I also recommend installing the Tekonsha T-One Vehicle Wiring Harness # 118255 before...
view full answer...
Trailer Hitch Receiver and 4-Way Flat Vehicle Wiring Harness For a 2024 Ford Maverick
Yes, we have the Curt Trailer Hitch Receiver # C84BR which is confirmed to fit your 2024 Ford Maverick. This will provide you with a 2" receiver. We also have the Curt 4-Way # C59496 which will allow you to connect to most small utility trailers and boat trailers. It will also allow you to use Auxiliary Lights # C53201 should you carry a hitch mounted accessory which impairs the view of your tail lights. The Mounting Bracket # C58001 will allow you to secure the 4-way at the end of the...
view full answer...
What Additional Steps Are Required For Installation Of The Curt Receiver # 13707 on Dual Exhaust?
The Curt Trailer Hitch Receiver # 13707 only requires modification to the passenger side exhaust bracket on 2003 and later models with dual exhaust. You will not have to modify the exhaust on your 1997 Mercury Grand Marquis. If you had a 2003 or later model the passenger side exhaust hanger is removed before installing the receiver. Then it is reversed and attached with the additional 5/16" hardware included in the kit after the receiver has been installed. I do recommend installing...
view full answer...

< Previous

12 3. . .5

Next >

Do you have a question about this Accessories and Part?

Info for this part was:

Written by:

Lindsey S

Video Edited:

Dustin K

Video Edited:

Chris R

Installed by:

Cole B

Installed by:

David F

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Isabelle B

Updated by:

Carrie F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.