Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Recommended 2 Inch Receiver Ball Mount With 2 Inch Rise And 2 Inch Hitch Ball
  The Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs, # C45155, has the 2-1/4 inch rise that you mentioned. A 1/4 inch won't make much difference at all and will allow allow you to tow safely, so I recommend this ball mount for your application. The pin and clip are included with this ball mount and the 2 inch ball is welded to the unit.
  view full answer...
• Troubleshooting A Ball Mount That Gets Stuck During The Installation In My Hitch Receiver
  While your 2021 Ford Bronco Sport has a 2" hitch receiver, it is Class II. This is unusual. Class II hitch receivers are usually 1-1/4". If you have a ball mount, like the Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs, part # C45155, you should not have to hit a hammer to get the ball mount to fit your hitch receiver. If you feel that the welds are a product defect, you can file them down to help your ball mount get installed smoothly. In addition, sometimes...
  view full answer...
• Ball Mount with 2 inch Rise Recommendation for 2023 Porsche Macan
  Right around a 2 inch rise would be your best ball mount solution to allow you to tow your trailer level. For that the Curt Ball Mount with 2 inch ball part # C45155 would work really well. It has the 2 inch rise you need and comes with a ball mounted to it and a hitch pin and clip so it would be everything you'd need.
  view full answer...
• How To Determine Which Ball Mount To Choose
  We have a very wide variety of ball mounts to choose from. Finding the correct one will depend on a few things though. First you will need to know the distance from the ground to the top of the inside of the trailer hitch once installed. Next, you will then need to measure from the ground to the bottom of the trailer coupler when on as even a surface as possible. The difference will tell you how much drop or rise you will need. As an example, if the trailer hitch measures 12" and the...
  view full answer...
• Ball Mount with 2 Inch Rise and Ball Already Installed in Rise Position
  The Curt ball mount # C45042 only comes with the ball torqued into the drop position but we do have part # C45155. This has the ball in the rise position and it's a 2-1/4 inch rise but it's only a 2 inch ball not a 2-5/16 inch. If you need a 2-5/16 inch ball you'll need to move the ball on part # C45042.
  view full answer...
• How to Choose a Ball Mount for a 2018 Toyota 4Runner
  In order to choose the correct ball mount for your new 2018 Toyota 4Runner you will first need to measure from the ground to the top inside edge of your trailer hitch and then from the ground to the bottom of the coupler on your trailer while level. The difference between the two measurements will tell you the correct amount of rise/drop you need to look for in a ball mount. Once you obtain these measurements you can either let me know what they are so I can make a recommendation or use...
  view full answer...
• What Do I Need for Mounting My European Model of Thule EasyFold XT 933300?
  I have a possible solution for you. I went ahead and called my contact at Thule, and he gave me some European specs for the Thule EasyFold XT 933300. Since the European Thule EasyFold XT utilizes a hitch ball mount between 22mm-80mm, your best bet is the Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs # C45155. The Curt fusion ball mount will satisfy both the shank length requirement and the ball size requirement for mounting the 933300. If you need a hitch recommendation...
  view full answer...
  
• How to Install the Thule Camber into the Hitch of my 2006 Honda HR-V
  The Thule Camber 2 Bike Rack part # TH9058 is designed to work with both the 2" and 1-1/4" hitches. It is possible that a ball mount like the Curt Fusion Ball Mount for 2" Hitches part # C45155 is currently installed into the hitch and will need to be removed before installing the bike rack. To do this there is a pin and clip holding it. Pull the clip then the pin and the ball mount will slide out allowing you to then install the rack. Check out the linked video which will show how the...
  view full answer...
• How to Determine Correct Ball Mount Rise/Drop for Towing with a 2015 Subaru Outback Wagon
  To choose the correct rise/drop for a ball mount you'll first want to park both your 2015 Subaru Outback Wagon and your single jetski trailer on level ground and then take some measurements. For your Outback Wagon you want to measure from the ground to the top inside of the hitch receiver, and then for your trailer you want to measure from the ground to the bottom of the coupler. If your hitch is higher then you need a drop but if your trailer is higher you need a rise. Simply subtract...
  view full answer...
  
• Weight Capacity for and Parts Needed to Tow with a 2017 BMW X1
  From what I could find online it looks like the towing capacity of your 2017 BMW X1 ranges from 1,023 lbs - 1,177 lbs depending on the exact model. You should be able to find specifics on this in your owner's manual as I couldn't locate one online. If you don't have your owner's manual or can't find the capacities then you can always contact your local dealer with your VIN for that capacity. The reason why the Curt Trailer Hitch Receiver # C13303 that you referenced has such a higher weight...
  view full answer...
  
• Which Curt Hitch Will Fit My 2022 Honda CR-V Hybrid?
  If you are looking for an American made Curt hitch that will fit your 2022 Honda CR-V Hybrid so you can pull your little trailer with, you will want the Class III # C13397. Though you will need to check your owner's manual for the max capacities of your CR-V, but this is rated up to 3,500 pounds towing and 525 pounds of tongue weight, so it will be the one to get. As a side note, you will also need some wiring if you will be towing. With that said, I recommend the Tekonsha T-One Vehicle...
  view full answer...
• Will Curt Trailer Hitch C13381 fit a 2019 VW Tiguan 4Motion
  Yes, as long as your 2019 Volkswagen Tiguan 4Motion is a model S, SE, SEL or SEL Premium, the Curt # C13381 Trailer Hitch will fit perfectly. Just note that the hands-free liftgate sensor will be limited to either side of the receiver as the 2 inch square receiver will interfere with it in the center. If you're planning on towing a trailer, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat # C56403 to power up your trailer lights. This is the only custom harness...
  view full answer...
• Trailer Wiring and Ball Mount for 2023 Subaru Crosstrek Towing U-Haul Trailer
  The rental trailer will require a 4-way connector so for your 2023 Subaru Crosstrek you'd want the part # C56040 which installs very easily. U-Haul states that the coupler height of their trailers is right at 18 inches so since we know the hitch height of the Curt # C13382 you have installed is right at 15-1/2 inches you'd need a rise of 2-1/2 inches like with what the Curt # C45155 would be perfect for. It even comes with the ball mounted.
  view full answer...
• Recommended 3 Rise Ball Mount For 2 Trailer Hitch Receiver
  I was able to confirm that the Curt Fusion Ball Mount for 2" Hitches - 2" Ball # C45155 does have a 2-1/4" rise. Since your hitch height is 15", and the trailer coupler height is 18" you will need a ball mount with a 3" rise to make your trailer level. To do that I recommend the Draw-Tite Ball Mount for 2" Hitches # 2753 which will give you 2-3/4" rise making you very close to level and includes a hitch pin and clip, and using 2" Hitch Ball # 63845, or 1-7/8" Hitch Ball # 19260 to match...
  view full answer...
• How To Obtain 18" Coupler Height with Curt Trailer Hitch CU64FR for 2014 Subaru Forester
  The Curt Trailer Hitch Receiver part # CU64FR while installed on a 2014 Subaru Forester will sit around 16" off the ground when measuring to the top inside edge of the receiver tube opening. Therefore, in order to get an 18" coupler height you'll need a ball mount with 2" rise, the Curt Fusion Ball Mount for 2" Hitches part # C45155 has everything you need.
  view full answer...
• Towing My Two Bonafide SS127 Kayaks With A 2019 Subaru Forester Using The OEM Trailer Hitch
  Yes, you can use the Malone EcoLight Sport Trailer with J-Style Carriers for 2 Kayaks - 400 lbs, part # MAL93FR, to carry your two Bonafide SS127 kayaks on your 2019 Subaru Forester. The last parts you will need are the hitch ball and ball mount for the 2" coupler. You will need to determine if you need a ball mount with a rise or a drop. You want your trailer to be level when it is being towed. I have included a weblink with instructions on how to find this figure. It involves finding...
  view full answer...
• Ball Mount to Use with etrailer Hitch for 2013 Nissan Rogue and Apogee Optimax
  We aren't familiar with the coupler height of an Apogee Optimax but it sounds like you assume it would be right at 15 inches which is a pretty standard height. And if that's the case a ball mount with 2-1/4 inch of rise and a 2 inch ball like the Curt Fusion part # C45155 that you referenced would work great with the hitch that fits your 2013 Nissan Rogue part # e98846. If you needed trailer wiring you'd then need the # C56033.
  view full answer...
• Recommendations For Setting Up A 2022 Subaru Outback Wagon To Tow A Trailer
  To get your 2022 Subaru Outback Wagon ready to tow a trailer, you will need to start with a hitch. The Curt Class III # C67JR is definitely a great place to start. This American made hitch will be one of the most, if not the most, hidden options we currently have available, so it will have a nice clean look once installed. The install is a bit labor intensive, but not overly so and I did include an install video to help. This will also measure 15-1/2" from the ground to the inside top of...
  view full answer...
• Is it Better to Go with Higher or Lower Rise Ball Mount than Needed
  You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the Curt Class III Drawbar # C45270. This is considered an extra long ball mount, measuring 13 inches from the hitch pin hole to the ball hole. Another option is the Curt Ball Mount for 2 Inch Hitches - Angled Shank # C45230. This ball mount has...
  view full answer...
• Will Curt Powered Tail Light Converter Fit 2016 Volkswagen GTI SE
  Yes, the Curt Powered Tail Light Converter # C59236 will work for your 2016 Volkswagen Golf GTI SE. If you check out the attached installation video you can see us install it on a 2017 GTI. If you don't already have a trailer hitch then I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7309 because it is the only option available that has both a hidden crosstube (for better ground clearance and looks) as well as a 2" receiver which makes it compatible with a wider variety...
  view full answer...
• Will Curt Fusion Ball Mount Work for Towing Lawn Care Trailer With 2000 Lexus RX 300
  You can use the Curt Fusion Ball Mount # C45152 to tow your lawn care trailer with your 2000 Lexus RX 300. The only reason you wouldn't be able to use it is if you don't have a 2" trailer hitch receiver like the # e64KR on your vehicle. This ball mount uses a 1-7/8" ball. If you need a 2" ball instead then you would need the # C45155
  view full answer...
• Adjustable Ball Mount For A 2014 Mercedes Benz GLK
  To get your ball to the height you are wanting on your 2014 Mercedes Benz GLK I recommend using an adjustable mount. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black Item # BWTS10038B. It provides a 1-7/8" ball and a 2" ball for different trailer couplers and fits 2" receivers. It is going to provide a 5-1/2" rise so it is going to provide the adjustability you are looking for. I recommend making sure the trailer doesn't exceed the weight capacity...
  view full answer...
• Multi-Purpose Ball Mount With a Rise To Tow A Trailer and Carry a Bike Rack
  I have an option for you but there is not a multi-purpose ball mount like part # D210 available that is designed with a rise. I recommend to use the Malone 2" Dual Purpose Hitch Receiver part # MPG544 which is designed to carry an accessory and tow a trailer. You would just use a ball mount with a 2" rise in the adapter like part # C45155 which has a 2-1/4" rise and includes a pre-welded 2" ball. Please keep in mind the use of any hitch adapter cuts the tongue weight capacity of the...
  view full answer...
• Towing Capacity of a 2012 Toyota Prius V
  According to the owner's manual for your 2012 Toyota Prius V, "Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers." If you choose to do so anyway you will need a trailer hitch, wiring harness, and ball mount/hitch ball. For this, I recommend using...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?