How To Mount 4-Way Connector To 2020 Mazda CX-5 With Trailer Hitch Receiver
Updated 01/23/2021 | Published 01/21/2021
Products Featured in This Question
Question:
do the make a wire harness that is made to mount on a bracket under the car rather than having the wires inside the car and running them out when in use?
asked by: Jesse D
Helpful Expert Reply:
Absolutely!
Starting with the harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118746 which is a plug and play harness confirmed to fit your 2020 Mazda CX-5. I included an installation video of the harness, but you will need to do it slightly different. You will need to cut a slot in one of the grommets in the floor of vehicle, allowing the harness to pass through underneath the vehicle.
Then to mount the harness you can use the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector # C58001 which simply bolts to the etrailer Trailer Hitch Receiver # e98902 you were looking at, or another great option is the Hopkins Knockout Adapter for 4-Way Flat Trailer Connector # HM47605 which will require you to drill a 1-1/4" hole in the bumper of your vehicle for it to mount.
I included videos for each of the products mentioned, and a picture of the Hopkins # HM47605 installed on a customers vehicle for you to take a look at.
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Spare Tire Cover
- Search Results: trailer deck screws
- Search Results: tire cover
- Search Results: trailer jack bearing
- Shop: Trailer Hitch
- Video: Redline Tie Down Anchors TFX225ACQ Review
- Video: Review of the Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Q&A: Comparing Curt and Draw-Tite Hitches for 2019 Mazda CX-5
- Q&A: Can Draw-Tite 76138 Class III Hitch Be Installed on 2022 Mazda CX-5 Without Using a Lift
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Dimensions of the Bulldog Jack Support Plate # BDSPBQ50
- Video: Ultimate Overview of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118746
- Video: An In-Depth Look at the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector
- Video: Best 2020 Mazda CX-5 Trailer Hitch Options
- Video: Setting up the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2020 Mazda CX-5
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
- Q&A: Recommended Hitch and Wiring for Carrier Platform on a 2020 Mazda CX-5
- Shop: Brake Controller
- Search Results: 4 flat mounting bracket
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2021 Mazda CX-5
- Q&A: Will Hopkins 4-Way Trailer Connector Fit Brophy Mounting Bracket # BK4F
- Search Results: 18136 mount bracket
- Search Results: wiring harness mounting bracket
- Search Results: trailer wiring harness
on Trailer Hitch
