Available 8-Lug Trailer Hubs for Spindle TRU67FR
Updated 03/04/2019 | Published 03/01/2019
Products Featured in This Question
Question:
Can you get a hub that is 8 on 6.5 for spindle TRU67FR
asked by: Howard C
0
Expert Reply:
None of the available 8-on-6-1/2 hubs use the bearings required for a fit on agricultural spindle # TRU67FR. That spindle requires a hub that uses bearings 506849 and 501349. We have one hub that fits that spindle, part # AH60880FCOMP, but this has an 8-on-8 bolt pattern.
We do offer trailer hubs with the 8-on-6-1/2 wheel bolt pattern. These include both hub/drums like Dexter # 42866UC3-EZ and idler hubs like # 42865-KIT and all appear on the linked page.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Agricultural Spindle for 6,000-lb Trailer Axles - 2-3/4" Diameter
- Trailer Spindles
- Agricultural Spindle
- Without Flange
- 506849
- 2-3/4 Inch Diameter
- Round
- For 6000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Q&A: Replacement Trailer Rim With A 4,000 Plus Capacity
- Q&A: Can I Swap Out My Kodiak Hub and Rotor for a Deemaxx Hub and Rotor?
- Q&A: Are There Hubs for a Straight Spindle with 1-1/4" or 1-3/8" Diameter
- Q&A: What are the Measurements of Optronics Replacement Side Marker Lens # AL9RB
- Q&A: What Size Axle Does the Spindle part # TRU37FR Fit
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Trailer Maintenance Schedule
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 2011 Ford Super Duty with 5th-Wheel/Gooseneck Trailer Tow Prep Package