Compatibility of TRU67FR Spindle and Dexter 42655UC1 Idler Hub

Question

Question:

please confirm the following part #s will work together: AS6000F 42655UC1 thanks

asked by: Scott G

1

Helpful Expert Reply:

We carry the # AS6000F spindle as part # TRU67FR. The spindle and the # 42655UC1 hub you mentioned aren't compatible.

If you wanted to use the # TRU67FR (AS6000F) spindle, you'd need to use the compatible hub which is part
# AH60880FCOMP. This is an agricultural hub which isn't meant for higher speed road use, and has an 8 on 8 bolt pattern which is pretty much relegated to farm equipment.

If you need a spindle that's compatible with the # 42655UC1 hub, which has a more commonly used for trailers 6 on 5-1/2 inch bolt pattern and is usable on the road, you'd want to use the # TRU57FR spindle.

expert reply by: Mike L

1

Answer 1

Thanks for reaching out, James! The T-One Vehicle Wiring Harness #118572 you're looking at is for the Sedan version of a 2012 Volkswagen Jetta. Since you have a Wagon you'll need universal wiring like the Curt Powered Tail Light Converter w/…

view full answer...

Answer 2

Hello Juan. A 6,000 lb rated spindle, such as the Agricultural Spindle #TRU67FR is intended to be used with a 3" outer diameter axle tube. With the ID being 2-3/4". We do not carry any axle tubing here at etrailer though. We do have…

view full answer...

Answer 3

So the install of a spindle like the #TRU97FR really needs to be done by a welder who has done the job before and has the special jigs for the job. It's a precision job and we can't recommend a method for it aside from taking it to someone…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Compatibility of TRU67FR Spindle and Dexter 42655UC1 Idler Hub

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching