Gravel roads develop ruts and low spots that collect water. This scrape blade mounts behind your ATV or UTV to smooth uneven surfaces and move loose gravel toward the road's center. Black Boar implement lift required (sold separately).
Traffic pushes gravel out of place, leaving ruts and low spots where water collects. Pull this scrape blade behind your ATV or UTV to smooth uneven surfaces and redistribute loose gravel along your driveway, private road, or trail. You can also move displaced gravel back toward the center of a road to help maintain its crown, allowing rainwater to drain toward the roadside ditches instead of pooling in the driving surface.
The blade has five positions: straight at 0° or angled 7.5° or 15° to either side. Keep it straight to smooth an area, or angle it to move loose dirt and gravel in the direction you need. To change the angle, raise the blade, remove the hitch pin and spring clip, rotate the blade to the new position, and secure the pin again.
This scrape blade attaches to the Black Boar manual implement lift (CAM82PC - sold separately) or the electric implement lift (CAM95PC - sold separately), not directly to your ATV or UTV hitch. The blade attachment tube and angle bracket assemble with the included hardware, and a hitch pin and spring clip secure the blade to the lift. Raise the blade to travel between work areas, then lower it to grade the surface. The lift holds the selected working angle as the blade lowers.
To assemble either lift, you'll need a 3/4" wrench, a 3/4" socket (PTW38524 - sold separately), and a torque wrench (PT87ZR - sold separately) capable of 70 ft-lbs. The manual lift also requires a grease gun (L30-310 - sold separately) with moly lithium grease (LM54FR - sold separately). For the electric lift, you'll need a wrench or socket that fits your ATV or UTV battery terminals to connect the included wiring harness.
The extra weight of a lift and implement can make the back of your ATV sag. The Black Boar suspension lock (CAM85PC - sold separately) supports the rear suspension to limit sag during implement work.
The scrape blade is one of several Black Boar implements that work with the same lift. For maintaining gravel roads and trails, switch to the landscape rake (CAM65PC - sold separately) to gather loose debris and spread gravel. For soil preparation, the chisel plow (CAM75PC - sold separately) loosens compacted ground, and the disc harrow (CAM45PC - sold separately) breaks up clods and works the topsoil. The plugger (CAM92PC - sold separately) removes small cores from the ground to aerate lawns, and the cultipacker (CAM42PC - sold separately) breaks up remaining clods and firms a prepared seedbed. Add the implements that match the work around your property without buying another lift for each job.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.