LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
(110 reviews)
Price: $18.81
In Stock
LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
Item # MCL84RB
Retail:$57.23
Our Price: $18.81
You Save: 67%
Orders above $150 qualify for Free Shipping
In Stock
- All Info
- Reviews (110)
- Q & A (15)
- Photos
- Why etrailer?
Optronics Trailer Lights - MCL84RB
- Clearance Lights
- ID Bar
- LED Light
- Red
- 17L x 1-1/2W Inch
- Surface Mount
- Rear Clearance
- Submersible Lights
- Optronics
16-1/2" Long x 1-3/8" tall. Waterproof identification light bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.
Features:
- LED trailer light functions as an identification bar for trailers wider than 80"
- 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately)
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable stainless-steel base
- Red lens over white LEDs
- Surface mounts on trailer - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
Specs:
- Dimensions: 16-1/2" long x 1-3/8" wide x 1-5/8" thick
- Distance between mounting holes (center on center): 16-1/16"
- Diodes: 9
- 3 per light
- Power draw at 12.8V: 0.153 amps
- Wire length: 50"
- Lifetime warranty on LEDs
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck Lite # 15050R
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
MCL84RB Optronics LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - White Base - Red Lens
Alternate part number: MCL-84RB
California residents: click here
Customer Reviews
LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens - MCL84RB
Average Customer Rating: 4.7 out of 5 stars (110 Customer Reviews)
16-1/2" Long x 1-3/8" tall. Waterproof identification light bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.
- MCL84RB
Smitty S - 11/18/2017
by: Smitty Smithsonite11/18/2016
Still looks great, and more importantly, it has made it through a complete New England season cycle without ONE LED failing! Thing sat buried in snow for weeks, parked with the tail facing North where it gets no sun at all! Stays wet most of the time over there. Through all the heat, humidity, and torrential downpours of New England summers, they still live on. Nice, bright LEDs too.
Comments
2 years since the installation, still working great! Glad I bought these.
Smitty S - 11/18/2017
- MCL84RB
by: Ayla M.10/13/2016
These lights are amazing! They are the brightest LED lights I have found. They are bright in the day time and super bright at night! Easy installment with the videos they have available on their website. I will be shopping with etrailer.com from now on. Best prices around.
- MCL84RB
by: Light Bar06/26/2021
As always, the service was excellent and the light bars work as they should. After a year, still plugging along. Couldn't ask for anything more.
- MCL84RB
Paul M - 06/10/2020
by: Paul M06/09/2019
I self installed all of these LED trailer lights on my boat trailer. They look awesome and work great even through multiple launches in the lake under water. I would recommend this lights and the prompt service from etrailer
Comments
I continue to be impressed with this trailer LED. They work all the time and continue to perform while underwater at the boat ramp while launching my boat. Highly recommend.
Paul M - 06/10/2020
- MCL84RB
by: billdozer04/21/2021
I changed out my original Wesbar incandescent trailer running lights to LED. The thin line series snapped right into the original base. Looks great and they are water proof.
- MCL84RB
by: Thomas06/30/2019
Great product! One of the few LED ID light bars that I could find that is a direct replacement for my old, broken one, 16” (16 1/4”?) long from center to center of the mounting holes. Easily wired to my boat trailer and I mounted it with stainless steel rivets. Also, was about $10 less expensive than on that other online site, and fast shipping. Very satisfied!
- MCL84RB
by: Bader08/30/2014
These are my favorite lights for a long time. I bought the LED lights to replace my old ones that were incandescent bulbs. They are installed under the rear of my Sierra's tail gate.
- MCL84RB
by: Arizona Tom D04/09/2021
No brainer. If you need parts and pieces for your trailer, use etrailer.com and you won't be disappointed.
- MCL84RB
Dan P - 08/21/2018
Dan P - 08/21/2018
by: Dan Pelletier08/21/2017
Quick response, awesome service and fast delivery . Did complete restoration on my utility trailer and these are by far the best led lights for the job . Very happy with the end results. Would recommend this to any dyi person.
Comments
I’ve got no complaints, If I restore another trailer this is the place to purchase all my led lights ! They work great !
Dan P - 08/21/2018Comments
I’ve got no complaints, If I restore another trailer this is the place to purchase all my led lights ! They work great !
Dan P - 08/21/2018
- MCL84RB
by: Richard08/03/2021
Very good quality and bright lights.
- MCL84RB
Jon - 11/08/2018
by: Jon11/01/2017
Replaced my plastic frame OEM light because one of the mounting tabs cracked off. This new metal one is durable, LEDs are bright, hole spacing matched the old one, and it looks great.
Comments
Thank you for the follow up. I am still satisfied with the light bar and it seems to be holding up with no issues after the first year of use.
Jon - 11/08/2018
- MCL84RB
by: Joshua Stanz06/25/2017
I installed this on my trailer immediately upon arrival and took my boat to the lake for the day and when I came home I inspected all my lights and "one" of them has moisture inside of the housing just within one day of lunching the boat. My side marker lights are sealed with epoxy and made in the USA "which I purchased at my local trailer store" and they are perfectly dry inside the housing. Not sure how these are made but they seem like there is no quality control on these led light housings.
- MCL84RB
by: Wesley11/20/2021
exactly what I needed and ordered!
- MCL84RB
Mac M - 09/13/2019
by: Mac M08/28/2018
My original and one other replacement were made of plastic. Prop back wash broke both of them. The stainless unit has worked well and the mounting holes lined up so installation was easy. Looks good and should for years to come
Comments
Light bar is holding up better than new. All of my purchases with etrailer have worked out great and I will continue to use them in the future.
Mac M - 09/13/2019
- MCL84RB
by: Galen11/09/2020
Ordered the light bar for the top of my horse trailer. It fit perfect based on the product description, wired it up and it worked great. Good product at a good price.
- MCL84RB
by: Rod08/19/2019
Every time I have placed an order with etrailer , I have dealt with very friendly and helpful people . My orders have always been shipped very quickly and arrive on time and in great condition . I have nothing but good to say about the company or the products that they carry . I'll be ordering again when I need something for my trailers ect. Thanks for all your help .
- MCL84RB
by: Dan Pelletier08/21/2017
Quick response, awesome service and fast delivery . Did complete restoration on my utility trailer and these are by far the best led lights for the job . Very happy with the end results. Would recommend this to any dyi person.
- MCL84RB
by: Jim05/17/2021
Everything was as advertised no surprises or defects,satisfied with products
- MCL84RB
Matt - 10/12/2020
by: Matt10/08/2019
Fit perfectly an install was easy. Much easier when the boat was off the trailer.
Comments
After one year, still works great. Perfect fit replacement for my boat trailer
Matt - 10/12/2020
- MCL84RB
Raymond - 09/18/2019
by: Raymond09/13/2018
Easy to install! Very bright even in the daylight! Plenty of lead wire makes wring connections convenient and easy! We will defiantly be purchasing this item again when the occasion rises.
Comments
A year later, and could not be happier! Product is mounted on a Vacuum Truck. In and out of Industrial environments daily. Covered at times with splatter of acidic and corrosive materials, washed at end of the day.
Raymond - 09/18/2019
- MCL84RB
by: Timothy05/13/2021
High quality product. really good servi ce.
- MCL84RB
by: Keith08/15/2020
Good construction and price. Just what I needed to replace my original ID bar without drilling new holes. Completed my LED replacement. My LQ horse trailer now pulls less than 1 amp for the whole rig.
- MCL84RB
by: John L.02/03/2015
This unit was not a perfect fit for my 2004 Carson dump trailer, but with a sharp drill bit and cutting oil, it was an easy installation. This has a power and ground wire, unlike the original, but an easy fix as well. Looks good. We will see how it holds up on a construction dump trailer.
- MCL84RB
by: Jess05/19/2020
Replaced the original Carry-On identifier light because over time the aluminum failed. Had to drill new fastener holes and reroute the wiring but nothing hard to do.
29
114
Show More Reviews
Ask the Experts about this Optronics Trailer Lights
- Comparing Optronics Trailer Lights MCL-83 and MCL-93The MCL-83 measures 17 inches long overall and 1-1/2 inches deep. It draws 0.141 amps at 12.8 volts. Light MCL-93, # MCL93RB, is 16-1/2 inches long overall and 1-5/8 inches deep. It draws 0.051 amps at 12.8 volts. Both are LED lights just with different measurements and power draw ratings.
view full answer... - Replacement ID Bar Light Recommendation for Horse Trailer You can hit reply to this email with the picture and I'll take a look.
view full answer...![Image 1 for]()
- Looking for LED 3-Light Trailer Light for a Wide TrailerThe center mount 3-light trailer lights that you are looking for are classified as clearance lights. If you were looking under tail lights, that may explain why you could not find them right away. I have attached a link to all of the LED 3-light trailer lights we offer for you to check out.
view full answer... - Looking for Sealed 3-Light Truck Trailer Identification LED Light Bar in AmberI spoke to my contact at Optronics and the Sealed 3-Light Truck Trailer Identification LED Light Bar, # MCL84RB, is not offered in amber. However, we do have a couple of light bars that may work for you. We offer the Sealed Amber 3-Light Truck and Trailer Identification Light Bar # MC93AB with black base and # MC99AB with white base. I have included a couple of short videos for you.
view full answer... - Is the Trailer Identification LED Light Bar # MCL84RB SubmersibleThe Sealed, 3-Light Truck, Trailer Identification LED Light Bar # MCL84RB that you referenced is submersible, but we still recommend you unplug your trailer lights when backing your trailer down the boat ramp so as to prevent any shorts due to the trailer's wiring.
view full answer... - Is Optronics Sealed 3-Light Truck Trailer Identification LED Light Bar # MCL84RB Offered in AmberAccording to my technical contact at Optronics their Sealed 3-Light Truck Trailer Identification LED Light Bar # MCL84RB is not offered in an amber version. For reference I have linked you to our main page for all LED-type amber clearance lights.
view full answer... - Can a LED Identification Light Replace a Non-LED Light on a TrailerIf you wanted to replace the broken identification bar on your trailer with an LED version like the part # MCL84RB you certainly could. An LED setup will last longer, be brighter and will draw less amperage so it would be a great option.
view full answer... - LED Marker/ Clearnace Lights for Cargo TrailerThe Optronics LED Trailer Clearance and Side Marker Light, part # MCL67RB is similar in dimension to the Bargman 99 series. The light features mounting holes that measure 3 inches apart, center-to-center, and has a power wire lead. The lamp grounds through its connection to the trailer frame. This lamp would be a great choice for side marker/ clearance lights for your enclosed trailer. Optronics also offers a light bar, part # MCL84RB which could be used for a light bar for the rear...
view full answer... - Recommended U-Bolts, Rollers and Boat Trailer Lighting/Wiring for a 1984 Shoreline TrailerThanks for sending us the pictures! Since you are installing a Bolster-and-swivel-bracket assembly part # CE10001G-4 and need a 4-1/8 inch width by 3-1/2 or 4-inch length U-bolt, we currently don't offer a close match. I would recommend going to a local hardware store to locate a U-bolt with the dimensions you need. I would go with a stainless steel u-bolt because it is corrosion resistant and ideal for marine applications. For the lighting and wiring on your 1984 Shoreline boat trailer,...
view full answer...![Image 1 for]()
![Image 2 for]()
- Recommendation For LED Boat Trailer Light Kit For Submersible ApplicationsSounds like you need something like the Submersible Over 80" Aero Pro LED Trailer Light Kit w 25' Wiring Harness, Item # TLL36RK. The lights in this kit are sealed and have a waterproof construction. The LEDs are very efficient and last 50 times longer than incandescent bulbs. This kit is for trailers that are over 80 inches so if your trailer is under 80 inches then you can use a similar kit, Item # TLL9RK. Since you want something waterproof that will hold up in salt water, I...
view full answer... - LED Trailer Light Recommendations for a Trailer Over 80 Inches in WidthI attached a help article that details all of the various taillight requirements for trailers based on their dimensions. A good kit to start with would be the part # TLL36RK, for an ID bar part # MCL84RB and then for red ID lights for the rear part of the side of the trailer part # MCL-91AK.
view full answer...![Image 1 for]()
![Image 2 for]()
- Lighting and Conspicuity Tape Recommendation for a 36 Foot Long TrailerI attached a help article on trailer lighting requirements based on size of the trailer. Based on your dimensions you would want the # TLL36RK to start and then would also need a # MCL84RB and a couple more clearance lights like part # MCL95AB. You will also need conspicuity tape as well like part # RTR150711PB. See the mentioned help article for placement of the lights and tape.
view full answer...![Image 1 for]()
![Image 2 for]()
- Recommended Trailer Light Kit for a Boat TrailerSounds like you are describing the Submersible, Over 80" Aero Pro LED Trailer Light Kit w 25' Wiring Harness # TLL36RK. This is a great kit from a great company. Optronics electrical products, including this kit, have typically received great customer reviews! The only thing that I would change when installing this kit is the quick-splice connectors. Since this will be on a boat trailer that is submerged under water the Deka Heat Shrink Butt Connector # DW05744-10 will hold up much better...
view full answer... - Recommended LED Marker Lights for Trailer Over 80 Inches WideThe Trailer Clearance or Side Marker Light w/ Reflex Reflector - LED - 3 Diodes - Red Lens - Black Base # MCL32RBB will have the room to hide wires. The amber lens # MC32ABB is an incandescent bulb. I believe you will want the Oval LED Trailer Clearance, Side Marker Light with Reflector, 6 Diode - Amber # MCL31AB along with the Oval LED Trailer Clearance, Side Marker Light with Reflector, 6 Diode - Red # MCL31RB. For the light bar, I recommend the Sealed, 3-Light Truck, Trailer...
view full answer... - LED Light Kit for Trailer Over 80 Inches WideThe "80" you are referring to is the width of the trailer, and it makes it easier to determine the light kit you need. Since you need tail lights as well as running lights, I recommend the Aero Pro LED Trailer Light Kit for Trailers Over 80" Wide # TLL36RK. This will give you the Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and license plate light that you need for your trailer. For the light strip with three lights you were referring to you will need...
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer lights for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Video Edited:
Zack K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Video by:
Joshua S
Updated by:
Laura H
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
Installed by:
Brent H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.