Product Experts Available Now!
Call 800-298-8924
Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens
(94 reviews)
Price: $5.24
In Stock
Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens
Item # MCL13R2B
Retail:$7.81
Our Price: $5.24
You Save: 33%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (94)
- Q & A (11)
- Photos
- Why etrailer?
Optronics Trailer Lights - MCL13R2B
- Clearance Lights
- Rectangle
- LED Light
- Red
- 2-1/2L x 1W Inch
- Surface Mount
- Optronics
- Submersible Lights
- Rear Clearance
- Side Marker
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
Features:
- Rectangular LED mini trailer light functions as a clearance light or a side marker when properly mounted
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Red lens over white LEDs
- Compatible with 12V DC electrical systems
- Surface mounts to trailer - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 2-1/2" long x 1-1/16" wide x 5/8" thick
- Distance between mounting holes (center on center): 1-7/8"
- Diodes: 2
- Power draw at 12.8V: 0.046 amps
- Lifetime warranty on LEDs
Manufacturer Cross Reference
- This light functions as an exact replacement for:
- Peterson M168R
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL13R2B Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Rectangle - Red Lens - P2 Rated
Alternate part number: MCL-13R2B
California residents: click here
Customer Reviews
Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens - MCL13R2B
Average Customer Rating: 4.9 out of 5 stars (94 Customer Reviews)
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
- MCL13R2B
by: 01/15/2021
938079
- MCL13R2B
by: 01/08/2021
Every bright light 935225
- MCL13R2B
by: 01/06/2021
934152
- MCL13R2B
by: Thomas12/01/2020
917990
- MCL13R2B
by: Kerry11/07/2020
Excellent light. I ordered 2 and installed them. Will have to give them some time going in and out of water to see how they hold up, but initially they are awesome. 909446
- MCL13R2B
by: Matt08/28/2020
Easy to mount and connect, very bright, quick shipping 870675
- MCL13R2B
by: Gerald07/22/2020
USED ON BOAT TRAILER GUIDE . SMALL & VERY BRIGHT !!! 848636
- MCL13R2B
by: Gary07/22/2020
Exact replacement for broken light. Fast shipping and reasonable price. Thank you. 848293
- MCL13R2B
by: Jason05/14/2020
We use these lights here at Treeline Helicopters as indicator lights on our aerial tree saws, they are exactly as pictured and great quality, we’ve also used several heavy trailer products from etrailer and are very happy with the fast shipping and customer service! 799820
- MCL13R2B
by: John03/15/2020
Thank you for the great service 766409
- MCL13R2B
by: Bobby03/13/2020
THE SERVICE WAS VERY GOOD THANK YOU 765663
- MCL13R2B
by: John02/02/2020
Thank you 746741
- MCL13R2B
by: Dave N.j01/25/2020
My order arrived in a timely manner and was packed very well. The marker is just the right brightness and after all the bad weather it still looks the same and functions very well. The pricing was the best I could find also. Thank you ettrailer 745106
- MCL13R2B
by: Duncan01/07/2020
As ordered 737277
- MCL13R2B
by: Roger10/15/2019
As described. Quick shipment. Thanks. 717654
- MCL13R2B
by: Gary07/16/2019
this one came as pictured. no defects gary 671140
- MCL13R2B
by: Richard S10/08/2018
Installed these on my new fenders Easy to install. Nice looking 572682
- MCL13R2B
by: Daniel07/22/2018
Lights came in last nite. I have a wells cargo double axle 6x12 trailer that I'm going to "spiff"up.im adding and replacing old marker lites and these mini LED lites with chrome trim were the answer! I will send you pics of before and after when they're mounted. Great looking lites and good price . 545026
- MCL13R2B
by: Bobby05/11/2018
Excellent product.....Been using these for 15yrs...on boat trailers.....Never a failure! Using the frame on a boat trailer is a big No No.....Most problems are Bad grounds....Run a separate Ground wire to your lights and waterproof the connections and your lights will last and function correctly! 506740
- MCL13R2B
by: Chris03/22/2018
Exactly the part I needed for the new boat trailer fenders. 487662
- MCL13R2B
by: bow hunter extreme01/09/2018
Good quality and its bright. 465839
- MCL13R2B
by: Harry10/24/2017
Bought a couple of running lites for my trailer. Shipped very promptly. Great product and great proce. 445679
- MCL13R2B
by: lvb10/14/2017
Great lights! Very bright. And being LED they are very low drain on electrical system. 442735
- MCL13R2B
by: bob08/24/2017
as advertised and on time 424686
27
99
Show More Reviews
Ask the Experts about this Optronics Trailer Lights
- What Gauge Wire is Optronics LED Mini Clearance or Side Marker Trailer LightThe Optronics LED Mini Clearance or Side Marker Trailer Light # MCL13R2B (Red Lens) and # MCL13A2B (Amber Lens) use 18 gauge wires on both their power and ground wire. I have added links to video reviews and installs of both lights for you to check out as well.
view full answer... - Can 20 LED Clearance Lamps Be Added To Trailer Without Overloading Tow Package Wiring on 2015 RamSince the clearance lights you're wanting to add are LED's, you have no worries. Each lamp draws only .046 of an amp at 12 volts. Multiply that by 20, and you have 0.92 amps which is less than an incandescent stop/tail/turn signal lamp would draw. This assumes that your trailer doesn't have and excessive amount of lighting currently.
view full answer... - Recommended Mini LED Side Marker With Red LEDsWe sure do have a red Mini LED Side Marker you are looking for. The # MCL13R2B actually has 2 wires. The white wire is for a ground and should be attached to a clean bare metal surface using the attached ring terminal. The black wire attaches to the running light circuit in the trailer wiring.
view full answer... - What Voltage Does Optronics LED Mini Clearance or Side Marker Trailer Light # MCL13R2B UseThe Optronics LED Mini Clearance or Side Marker Trailer Light # MCL13R2B that you referenced was designed to be used on a 12 volt power system. If you power them with a lower voltage setup you might get them to function but you'll also shorten the lifespan of the light by a considerable amount.
view full answer... - Distance Between Mounting Holes on the # MCL13R2BThe mounting holes of the Sealed, Mini LED Side Marker # MCL13R2B are 2 inches apart.
view full answer...![]()
- Availability of Clearance Light for Trailer that Uses a Power and a Ground LightYou could use the part # MCL95RB with a ground wire if you wanted to. All you would need to do is run the ground wire to the mounting stud of the light before you tighten it down. Or the part # MCL13R2B is a somewhat similar light that uses two wire for power and ground. It is also submersible.
view full answer... - Recommendation for LED Waterproof Corrosion Resistant Rescue Boat Trailer LightsSince your rescue boat trailer is 188 inches (15 feet 8-inches) tongue to tail and 89-1/2 inches (7-1/2 feet) width I recommend the following: I recommend Optronics right side LED trailer light # STL26RB and left side LED trailer light # STL27RB. They are waterproof and corrosion resistant and will mount to all surfaces. These work great with trailers over 80 inches wide. The left side has a built-in license plate light. The rear clearance and side marker red LED lights # MCL13R2B...
view full answer...![]()
![]()
![]()
- Are Chrome Trim Rings and Foam Gaskets Reqired for Replacement Side Marker Lights for Boat TrailerThe polished chrome ring, # A13C2B, is not required for mounting the sealed mini side marker lights, # MCL13A2B and # MCL13R2B. This is decorative trim ring only. The foam gasket, # A13G2B, would be used if these lights are mounted on the outside of an enclosed trailer, to keep out water and road grime. The foam gasket also provides some cushioning that may increase the life of the side marker lights. For your boat trailer the foam gasket would not be required but might be a good idea...
view full answer... - Is There Red Version of Optronics Trailer Clearance Light MCL85ABThe red version of the # MCL85AB was the part MCL85RB which we no longer can get. The most similar replacement at this time would be the part # MCL13R2B.
view full answer... - Replacement LED Light Recommendations For TrailerFor a grommet mount red 2 inch clearance light I recommend part # MCL55R1224B. This light uses a 2-wire pigtail, part # A46PB for installation. If you need amber, you would order part # MCL55A1224B. Installed without a grommet, these lights measure 2 inches diameter x 1 inch deep. You can use the 2 inch grommet part # A54GB for this light for a flush mount. It would require a 2-5/16 inch mounting hole. The tail lights I recommend are the Optronics GLOLight LED Stop/Turn/Tail Light,...
view full answer... - Similar Red Version of the Optronics Clearance Light # MC30ABI wish Optronics had a red version of the part # MC30AB but at this time they do not. For a somewhat similar red clearance light that has mounts that are 2 inches on center we have the part # MCL13R2B which would be a great solution.
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer lights for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Tyler C
Video Edited:
Patrick B
Video Edited:
Chris R
Installed by:
Shane H
Updated by:
Brian T
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.