Product Experts Available Now!
Call 800-298-8924
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
(390 reviews)
Price: $28.79
In Stock
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
Item # STL36RB
Retail:$32.88
Our Price: $28.79
You Save: 12%
Orders above $99 qualify for Free Shipping
In Stock, Ships Today
- All Info
- Reviews (390)
- Q & A (30)
- Videos (1)
- Photos
- Why etrailer?
Optronics Trailer Lights - STL36RB
- Tail Lights
- Rectangle
- LED Light
- Red
- Surface Mount
- 8L x 3W Inch
- Optronics
- Submersible Lights
- Stop/Turn/Tail
- Side Marker
- Rear Clearance
- Side Reflector
- Rear Reflector
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.
Features:
- Rectangular trailer tail light provides stop, turn, and tail light functions
- Built-in side marker and rear clearance light with reflex reflectors
- Sealed, waterproof construction is submersible
- Light is designed specifically for boat trailers
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable plastic housing
- Red lens over white LEDs
- Mounts on surface of trailer - hardware included
- 3-Wire pigtail
- White wire is for ground
- Brown wire is for the tail lights
- Green wire is for the stop and turn lights
- PC rated light produces a 180-degree beam pattern
- DOT compliant
Specs:
- Configuration: passenger's side (right-hand side)
- Driver side: STL37RB (sold separately)
- Dimensions: 7-7/8" long x 3-1/4" tall x 2-7/8" deep
- Diodes: 17
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.181 amps
- Side marker light: 0.047 amps
- Lifetime warranty on LEDs
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
STL36RB Optronics Aero Pro Combination LED Taillight for Marine Trailers More Than 80" Wide - Red Lens - Right Side
Alternate part number: STL-36RB
California residents: click here
Video of LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Optronics Trailer Lights - Multi-function LED Tail Light - STL36RB
Ellen: Hey everyone. I'm Ellen here at etrailer.com, and today, we're taking a quick look at the LED tail light for your trailers that are going to be over 80" wide.This is going to give you seven functions in one light, so we'll have our reflectors on the face here. That's going to be our rear reflector. We'll also have side reflectors. Turn that to the side, you can see, it reflects the light, catches the light. If anybody happens to see your trailer in the dark, it'll still be illuminated even when the lights aren't on, so it makes us more visible.And then we'll also have our actual lighting functions.
So I'm going to hook this up to power and ground so we can take a look at those functions. We'll have three wires to connect. Our white wire goes to ground, that ring terminal on there. Our brown wire's going to go to 12 volt power, a constant power. And then our green wire is going to be our turn signal and our stop.I'll turn on my power source and we can see our light turns on.
So this is going to be our rear light and our side marker light, so that's going to be two much more functions, so we're up to four now. And then it's also, whoop, connection just went out here. This isn't the light, that's my box is a little funky. There, our light's back on. And then if we hit the brakes, that's going to be our fifth function, gives us our brake light, and our sixth will be that turn signal for us as well.So it's also going to be our side marker light.
If you look at the side, still gives us that side light illuminated over there. So gives us all the functions we need in one single light. This is for the passenger side. If you want the driver's side, it is available here at etrailer.com using part number STL37RB and it's going to have all those same functions with an additional light at the bottom to illuminate your license plate. So that's going to have eight functions instead of the seven.But as far as this light here, it is, again, an LED light, so it's going to be very efficient, long-lasting.
There's no brittle filaments that can burst on you and need to be replaced. If anything should happen, you can replace this cover by removing the four screws around the corners here. This cover can be replaced if that happens to get damaged, cracked, or anything like that.Comes with the mounting hardware. Those carriage bolts are going to slide into these slots. We'll have three slots available so you can get the right width for your attachment points. I'll give you some measurements on the distance between those. Again, that is going to be two carriage bolts, two flat washers, and then two nuts to secure that in place.The housing is made out of a durable plastic. This is going to be a red lens over white LEDs and it is going to be PC rated, which means that it can offer that clearance and side marker function. Basically just gives you 180 degrees of visible light going around there, so even if you're at the back or at the side, it's still going to give you that lighting function that you need to be DOT compliant.Now, as far as the size of our light, overall it's about 7-7/8" long and then it's going to be 3-1/4" tall and about 2-7/8" deep. The wiring coming off the back, it's going to be about 15" of wire to work with there. It's longer than my ruler by about 2", so say roughly 15", a decent amount of wire to work. Of course, you will probably have to add a little bit more wire onto there to get it connected to the rest of your system. Our mounting holes at the back, between the farthest two they're going to be 4" apart center to center. Between the next two it's going to be 2" apart, center to center, and same thing for these, so each of them is 2" apart for those slots so you can get those dialed in.This does have a total of 17 diodes. Our power draw at 12.8 volts is going to be 0.181 amps for our stop and turn signal, and for our side marker light, it's going to be 0.047 amps. And there is a lifetime warranty on those LEDs from Optronics.That's pretty much going to do it for our look at the LED tail light for your trailers over 80" wide. Again, if you need the driver's side, that's going to be STL37RB. I'd highly recommend you check that out since you will need the pair of them to go on your trailer, but that's going to do it for our look, and thanks for watching.
Customer Reviews
LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger - STL36RB
Average Customer Rating: 4.9 out of 5 stars (390 Customer Reviews)
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.
- STL36RB
by: Tim09/24/2018
trailer light works great. Thanks for offering top quality products 568338
- STL36RB
by: Glenn03/18/2019
These lights are fantastic, they are brighter than the standard boat trailer lights, able see license light reflection in sun light, and finally they have supplied S.S. nuts and bolts. No rust!! I would have rated these 5 star if the nuts and bolts would have been standard size instead of metric. Just took extra time to find mm socket to fit!! 612690
- STL36RB
by: Brian12/30/2019
Both products greatly increased the brightness of my taillights which is what I wanted. They have worked since then without fail. The postal service originally lost my order and etrailer didn't hesitate to get another one sent out at no charge. Awesome customer service! 736123
- STL36RB
by: Tim12/30/2019
Easy order and perfect match to my trai ler. 734859
- STL36RB
by: Amy11/15/2019
great company to deal with.fast shipping and great products. 725839
- STL36RB
by: Rick F08/28/2019
Still working and bright 696705
- STL36RB
by: Jesse08/12/2019
before and after[old and new]...all is good... 683867
- STL36RB
by: Tim07/18/2019
Lights arrived quickly and work great 671963
- STL36RB
by: Ron B06/26/2019
Lights get submerged in the lake at least twice a week and never a problem. 662901
- STL36RB
by: Tim B.06/07/2019
Before purchasing these lights for my boat trailer, I had gone through two sets of lights with incandescent bulbs trying to find lights that wouldn't fill with water and cause damage to the bulbs and sockets. After a year of use, these lights still never leak when the trailer is put in the water. And the brightness of the LEDs is a huge improvement over the incandescents they replaced. 654500
- STL36RB
by: Stephen Crosby06/01/2019
Exactly what I wanted and fast shipping . 651295
- STL36RB
by: Neil05/15/2019
Optronics LED trailer lights are really very good. They work well, are very bright, and hold up well, except when you back your trailer into a tree. 642419
- STL36RB
by: Danny03/27/2019
very bright perfect for my boat trailer 614401
- STL36RB
by: Kenneth03/21/2019
Everything about the transaction went smoothly. Customer service helped a lot. I was trying to match this light with an existing light. Match looks perfect. Have not installed yet. Waiting for a break in the weather. I don't anticipate any issues. 613467
- STL36RB
by: Gabe11/08/2018
Great product. I replaced my old trailer lights on my 2002 Ranger 520 and these lights fit perfectly. Fast shipping and a fair price. Very Pleased. 581151
- STL36RB
by: Darrel11/02/2018
It was an exact replacement part. Good product and excellant service. Thanks 579585
- STL36RB
by: Robert10/04/2018
Delivered timely as expected, perfect fit and exact replacement for my Nitro Z8 boat trailer. Wires are exact same color match, all you have to do is remove the broken tail light assembly by removing 2 bolts. Cut to length, strip and attach to existing colored wires, Works perfectly. I recommend using Marine grade heat shrink too. If I break another one I will definitely purchase replacement here. Thanks again. 571723
- STL36RB
by: Kevin08/07/2018
The Over 80" Areo Pro Trailer light I received a year ago has worked excellent. I have had no issues with this product. Much better light than original equipment. If you are looking to buy new lights I suggest you look at this light very strongly. 550999
- STL36RB
by: Tim06/06/2018
Works exactly as described. Easy to wire and attach to trailer. No issues whatsoever and delivery was quick. 518404
- STL36RB
by: Don06/01/2018
Everything is looks fine thanks 515121
- STL36RB
by: William02/28/2018
Exactly what I needed and ordered 479828
- STL36RB
by: Gary01/01/2018
Easy to insall and see, looks good and works well. 464339
- STL36RB
by: Brian12/17/2017
Bought a brand new trailer and from the get go some of the regular lights were intermittent. Finally had enough and ordered LED's to replace them all; have not had a single light issue over a year later. All were direct drop in replacements, fit and look great. Thanks etrailer.com! 461012
- STL36RB
by: Bri12/11/2017
In use over a year now in my boat trailer with 40 trips to the lake... no issues. 459232
- STL36RB
by: Bob L.,10/26/2017
Good product. Good price. Quick shippin g. 446509
26
398
Show More Reviews
Ask the Experts about this Optronics Trailer Lights
- Optronics LED Trailer Tail Lights for 1999 Bass Tracker Boat TrailerSince you want to use the Aero Pro Submersible LED trailer tail lights on your Bass Tracker trailer you will want to order part # STL36RB for the right-hand or passenger side and part # STL37RB for the left or driver side. The driver side light matches this design but it has additional LEDs for the extra functions it provides, such as license plate illumination.
view full answer... - LED Trailer Taillight Recommendation for a 3110 Feather Lite Car TrailerI looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part # STL36RB and # STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get from Featherlite though as they aren't like anything we carry.
view full answer... - Replacement LED Marker Lights for Featherlite 3110 Tandem Axle Aluminum Car Hauler TrailerI checked the Featherlite website for photos of the LED lights used on their tandem axle aluminum car hauler trailer model 3110. The specs for this trailer indicate it uses LED type clearance and stop/turn lights but brand and dimensions are not provided. We do offer replacement LED lights for most trailer applications. Our main page for LED lights, which is linked for you, allows you to sort the results shown by just clicking on the characteristics you need, such as shape, color and...
view full answer... - Availability of Wesbar 102640 Capsule Trailer Lights AssembliesThe newer version of the light you referenced would be the part # 403026 for the left hand side and part # 403076 for the right hand side. If you current light is sealed there would be no way to replace the inner capsule.
view full answer... - LED Tail Lights with a Plug-In Connector for a 2008 Bass Tracker- Trailstar Boat TrailerWe do have the lights you are looking for. For the right hand side use Aero Pro Submersible LED Trailer Tail Light # STL36RPG. It is the same light only with a 2-wire molded plug. The matching left hand side is # STL37RPG.
view full answer... - Why are Some Lights Listed as Over 80 Inches and Others Under 80 InchesThe reason there are trailer light kits listed for under 80 inches and over 80 inches is that there are different lighting regulations for vehicles that have widths that are larger than 80 inches in width than ones that are less than 80 inches wide. You will need to check with your local laws and regulations on trailer lighting also. Check out the LED Submersible Right Hand Light # STL8RB and the LED Submersible Left Hand Light # STL9RB. These are stud mounted, submersible, rectangle...
view full answer... - Recommended Replacement Trailer Stop, Turn and Tail Light for an Optronics ST-36Although the # STL36RB light you referenced is the same size and shape as the other ST-36 Optronics lights, it is an LED light. The ST-36 by itself would have a standard bulb. If you need a replacement light with the standard bulb, you would use # ST36RB. To install either version of the light, you will need to cut off the plug and connect the wires from the light directly to the trailer wiring. You can view a standard trailer wiring diagram at the included link if you need it for...
view full answer... - Matching Left Hand Side Light to Go with Trailer Light # STL36RB The matching left hand light to go with the # STL36RB is the part # STL37RB. We also sell this as a kit with a bracket and wiring part # TLL36RK.
view full answer... - If Trailer Light # STL36RB is the Right Hand Light, What is the Compatible Left Hand Trailer LightThe compatible left side trailer light you are looking for is the Over 80 inch, Aero Pro Submersible LED Trailer Tail and License Light, 2 Wire, 8-Function, 23 Diode, # STL37RB. This is the same light just for the left side. It has the same functions and specs as the right side light that you have referenced with the exception that the left side light has 1 additional function and diodes for the license plate light.
view full answer... - Replacement Rear Trailer Light Assembly Passenger SideThe replacement light assembly that you will need is # STL36RB. This assembly is for the rear right side of the trailer. For your information, the other side or left side of the trailer is # STL37RB.
view full answer... - Trailer Tail Light Options for a Tear Drop TrailerThe Aero Pro Submersible LED Trailer Tail Light, # STL36RB, is a surface mount light. To mount this light you would need to have 2 or 3 bolts sticking out from the surface of the trailer because this light has slots on the back that fit over the bolt head and hold it in place. Is does not come with mounting hardware and a special bracket is not needed. The license plate light is made to shine down through the bottom. I would go with a flush mount light like # STL34RB. These lights...
view full answer... - Replacement Trailer Light Recommendation for a 2004 Pro Team 175 Boat TrailerI tried to find pictures of your trailer so that I could determine what trailer lights it would have and could not find a solid picture that I could use to know for certain what you have. One picture looked very similar to the # STL36RPG and the # STL37RPG that you referenced so there is a great chance these lights would work. If your lights measure 7-7/8" L x 3-1/4" W x 2-7/8" D then these would work.
view full answer... - Will Optronics Trailer Light STL36RB Fit a 2-3/4 Inch Wide Mounting Surface on a TrailerThe Optronics trailer light # STL36RB, mounts by attaching 2 or 3 bolts to the trailer frame and then sliding the light over the bolts. The back of the light has mounting slots to fit over the bolt heads. I have included a picture that shows this and the spacing.
view full answer...![]()
- Replacement LED Lights for Optronics Tail Light ST37According to my research the ST37 Optronics light can be replaced by the LED Tail Light # STL36RB (Passenger side) and STL37RB (Driver side). To verify this I do recommend measuring your lights to make sure they have the same (or similar) 7-7/8" long x 3-1/4" tall dimensions. These lights do come with mounting hardware to ensure you have a seamless installation when you replace your old lights. I have added a link to a video review of the lights I highly recommend checking out.
view full answer... - Is there an LED Replacement Available for the Low Profile Submersible Boat Trailer LightsThere is an LED version to replace the whole light on your trailer, you could use the Over 80 inch, Rectangular Submersible LED Trailer Tail Light, # STL36RB and STL37RB. The part you were looking at is not available in an LED version. I have added a link to all of our LED trailer lights. You can use the icons at the top of the page or the filters on the left hand side to search for LED lights that may suit your need.
view full answer... - What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail LightsA trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part # TLL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the clearance light built in and an additional red, rear side marker light would be required if you used an under 80 inch rated light on a trailer that is over 80 inches wide. Using an over 80 inch taillight on a trailer like yours that is under...
view full answer...![]()
- LED Replacement Lights for a Boat Trailer with Wesbar 105826 Tail LightsFor an LED replacement that is nearly identical to the Wesbar 105826 light you can use # STL36RB for the right side and # STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use # STL36RPG and for the left use # STL37RPG. I have linked a couple of review videos for you as well.
view full answer... - Optronics LED Trailer Tail Lights with 3-Prong PlugFor an LED-version of the Optronics light # ST66RPG you can use their parts # STL37RB and # STL36RB. These do not include the 3-prong plug but we offer these, right-angle part # A47PB and straight plug part # A45PB.
view full answer... - Comparing Optronics Aero Pro and Glolight Trailer Tail LightsThere would be a noticeable difference if you had both the Aero Pro light # STL37RB and the Glolight, # STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the top and bottom bars that light up solid. Both lights are going to be plenty bright. Light # STL37RB has 23 diodes which will be very bright as you can see in the picture submitted by reviewer Becky P. She is using tail lights # STL37RB...
view full answer...![]()
- Replacement Tail Light Options for 2002 Pro Craft Boat TrailerMy technical contact at Wesbar informed me that the submersible light that you have was discontinued a while back so replacement lenses are unavailable. Replacing your tail lights is going to be your best option. The Wesbar Submersible Right Hand Tail Light # 403076 that you referenced is the closest they currently have to the one that you have on your 2002 Pro Craft boat trailer. If you need the left hand light as well, it is # 403026. Another option is the Optronics Aero Pro Submersible...
view full answer...![]()
- Number of Diodes in Optronics Trailer Taillights STL16RB/STL17RB and STL36RB/STL37RBThe trailer taillights part # STL16RB and # STL17RB have 18 diodes and the tailligths part numbers # STL36RB and # STL37RB have 17 diodes so they are very similar.
view full answer... - How to Determine Replacement Lens for TrailerWe may have a replacement lens for your trailer but there is no way for us to know the light or the lens you currently have. So you will need to know the part number of your light in order to get the correct replacement lens. For example, the Replacement Tail Light Lens for Optronics ST36RB and ST37RB # A39RB fits LED Tail Lights # STL36RB. If you can't find the part number you will need to replace the entire light assembly. You can do this by simply measuring your current light and...
view full answer... - Do You Have a Replacment Lens for Optronics Light part STL37RBI spoke with my contact at Optronics and they do not have a replacement lens for the LED STL37RB or part # STL36RB. They do have them for the incandescent version, part # ST37RB or part # ST36RB. If you have the incandescent lights, the replacement lens is part # A39RB.
view full answer... - Right Hand Taillight Recommendation to Match the part # STL37RBThe Left Hand Optronics Light part # STL37RB is sold individually. For the matching right hand side light you would want the part # STL36RB.
view full answer... - Recommended 3 Wire LED Replacement Option for # ST66RPGFor the LED version of the # ST66RPG taillight, you will want the Over 80", Aero Pro Submersible LED Trailer Tail Light, 2 Wire, 7-Function, 17 Diode, RH # STL36RB and LH # STL37RPG.
view full answer... - Can Amber Light be Used as Turn Signal on Motorcycle Trailer?The Miro-Flex LED Turn Signal # MCL48AB can be used as an amber turn signal with your motorcycle trailer. It will work alongside the tail lights you referenced, Aero Pro - LH # STL37RPG and Aero Pro - RH # STL36RB, with the wiring you already have on your trailer. I've added links to review videos of these products for you to check out as well.
view full answer... - Availability of Replacement Led Light Assemblies to Replace 4 by 8 inch Bargman LightsWe have the Waterproof, Over 80 inch Aero Pro LED Trailer Light Kit w 25 foot Wiring Harness, item # TLL36RK, which includes the # STL36RB and # STL37RB lights you mentioned along with the connectors, mounting hardware, license plate bracket, wiring and side marker lights needed for installation. The lights are surface mounted 2 inches on center with the carriage bolts, nuts and washers provided. The back of the lights have a slot that accepts the head of the carriage bolt and the light...
view full answer... - Availability of Replacement LED Taillights For a 1990 Prowler 5th WheelWe have not found a supplier yet that makes a replacement LED surface mount trailer light like you are referring to. You could use the Waterproof, Over 80 inch Aero Pro LED Trailer Light Kit w 25 foot Wiring Harness, item # TLL36RK, which includes the lights, license plate bracket and all of the mounting hardware for the light you mentioned. The problem with these lights is that you will need to be able to access the back side of the mounting surface that the lights will be attached to....
view full answer... - LED Tail Light, Marker Light, License Plate Light, and Interior Lights for a 1976 Horse TrailerStarting with the tail lights, # STL36RB and # STL37RB are LED lights and mount on studs (surface mount). For side marker lights you can use # AL82AB with grommet # A91GB, and base # A91BOB. For a license plate light with bracket you can use # LPL55CB. We have numerous interior LED light options and I have included a link to them to the right. And to add a 7-Way trailer end you can use # H20046. Because there are so many light options if these won't work for you, let me know what...
view full answer... - Trailer Tail Light Recommendation that Needs Mounting Studs that are 2-1/2 inches LongNone of the stud mounted trailer taillights are going to have studs that are 2-1/2 inches in length. What you could do is get a Aero Pro Submersible LED Trailer Tail and License Light # STL37RB and then swap out the carriage bolts that come with it for longer ones that would fit your trailer. The matching other right hand light would be # STL36RB.
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer lights for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Brian T
Installed by:
Cole B
Installed by:
Robert C
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.