Replacement Tail Light Options for 2002 Pro Craft Boat Trailer
Updated 08/14/2013 | Published 08/10/2013 >
Products Featured in This Question
Question:
I have a 2002 ProCraft boat trailer with WesBar submersible trailer lights. I broke the outer lens, but the inside waterproof module is still good. This lens has clips on the sides and a single Phillips head screw in the bottom front corner for mounting. I cant find that lens design. Is there a replacement or am I going to have to change the whole fixture?
asked by: Jack
Expert Reply:
My technical contact at Wesbar informed me that the submersible light that you have was discontinued a while back so replacement lenses are unavailable. Replacing your tail lights is going to be your best option.
The Wesbar Submersible Right Hand Tail Light # 403076 that you referenced is the closest they currently have to the one that you have on your 2002 Pro Craft boat trailer. If you need the left hand light as well, it is # 403026.
Another option is the Optronics Aero Pro Submersible LED Trailer Tail Light Right Hand # STL36RB and # STL37RB for the left hand. The dimensions on these are 7-7/8 L x 3-1/4 W x 2-7/8 D inches.
Continue Researching
- Q&A: Can Trailer Parts Be Looked Up Using A VIN?
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator w Electric Lockout - Disc - 2" Ball - Primed - 7.5K
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator With Electric Lockout - DX49FR
- Q&A: Replacement Master Cylinder for Older Model Titan Model 60 Brake Actuator
- Q&A: Replacement Master Cylinder for Dexter UFP A-60 Brake Actuator
- Shop: Tie Down Marine Slides for Boat Trailer Bunks - Fits Two 8' Long 2x6 Bunks - Black
- Shop: Brake Actuator with Electric Lockout - Bolt On - Disc - 2" Ball - 7,500 lbs
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator - Drum - 2" Ball - Primed - 7.5K
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Shop: Dexter DX7.5L A-60 Brake Actuator - Weld On - Drum - 2" Ball - Raw Metal - 7,500 lbs
- Shop: Trailer Wiring
- Video: All About the CE Smith Carpeted Bunk Boards for Boat Trailers
- Video: CE Smith Carpeted Bunk Boards for Boat Trailers Feature Review
- Q&A: Wiring Harness for 2011 Toyota Tundra With Factory 7-Way
