Replacement Lens for Optronics ST-36-RH Tail Light

Updated 05/21/2020 | Published 05/19/2020

Products Featured in This Question

LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger

(263)

$38.81

LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 23 Diodes - Driver Side

(443)

$51.35

Question:

Is it possible to purchase a replacement Lens for an optitronics ST-36-RH?

asked by: Tom S

Helpful Expert Reply:

From what I was able to find out with my research is that the ST-36-RH that you've got is the same light as our Optronics LED Tail Light # STL36RB; the replacement lens for the STL36RB can be found using part # A39RB.

With that said, Optronics does make changes to their lights from time to time so I've provided a diagram that shows the dimensions of the current STL36RB that you'll want to make sure your current light conforms to. They should be fairly similar, but the important dimensions to look at are the 2 inch mounting slots to determine if this light will fit the existing mounting hardware.

If you find that your lights are a bit older and don't conform to these dimensions, you can replace your existing lights using # STL36RB and # STL37RB. I've linked an installation video of these lights in case you want to go ahead and replace them.

expert reply by: Erik B