bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. Utility Trailer
  5. 1001 - 2000 lbs
  6. Manual Jack
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
Fulton

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K

Part Number: FXP10W0301
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$94.91
Retail:$135.99
You Save: 30%
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the old Fulton bolt-thru swivel jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating is ideal for trailers near saltwater. Great Prices for the best trailer jack from Fulton. Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K part number FXP10W0301 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1730)
  • Q & A (0)
  • Photos

Fulton Trailer Jack - FXP10W0301

  • Boat Trailer
  • Utility Trailer
  • 1001 - 2000 lbs
  • Manual Jack
  • Weld-On
  • Side-Mount Jacks
  • Swivel Jacks
  • With Wheel
  • 10 Inch Lift
  • Fulton
  • Marine Grade

Replaces the old Fulton bolt-thru swivel jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating is ideal for trailers near saltwater.


Features:

  • Supports, lifts, and lowers your boat or recreational trailer
  • Swings up and down smoothly
    • J-bolt handle lets you position jack quickly
  • Makes it easy to move your trailer in tight spaces
    • Caster turns a full 360 degrees
  • Resists rust and corrosion, even in areas with salt
    • Premium Z-Max zinc coating has a 600-hour salt spray rating
  • Lasts for years thanks to durable steel construction
  • Avoids winch posts, tool boxes or other accessories mounted on your trailer
    • Sidewind handle lets you crank jack without your hand getting smashed
  • Incorporates a grease zerk for easy maintenance
    • No need to remove and re-lubricate gears
  • Mounts on your existing bolt-thru swivel bracket
    • Weld-on bracket (P9012-00 - sold separately) can also be used for mounting


Specs:

  • Fits mounting brackets for Fulton XP bolt-thru jacks
    • Pin hole spacing: 3" on center
    • Overall bracket dimensions: 4-1/2" wide x 4-1/2" tall
  • Lift capacity: 1,200 lbs
  • Bracket height:
    • 12-3/4" Retracted
    • 22-3/4" Extended
  • Screw travel : 10"
  • Clearance: 10-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 6"
  • Limited 5-year warranty


Dimensional diagram shows the outer diameter of the bolt-thru hole on the mounting plate of the XP10W 0301 Fulton jack Dimensional diagram shows the inner diameter of the bolt-thru hole on the mounting plate of the XP10W 0301 Fulton jack

Excellent Corrosion Resistance

The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time. So, the more you tow around it, the more you need to protect your trailer from it.


A rusted trailer jack welded to a trailer frame

The Z-Max zinc finish on this jack offers great corrosion protection, even with occasional use around saltwater, to help ensure that it doesn't end up looking like the one above. Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Traditional zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. Fulton's Z-Max finish lasts for 600 hours in the salt spray test - 30% longer than a standard powder coat finish.


The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion.


How to Determine the Lift Capacity You Need in a Jack

A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.



XP10W 0301 Fulton Trailer Jack - Swivel - Sidewind - 10" Travel - 1,200 lbs

Installation Details FXP10W0301 Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

1726 reviews
5 Stars
(1492)
4 Stars
(160)
3 Stars
(33)
2 Stars
(14)
1 Star
(27)
Replaces the old Fulton bolt-thru swivel jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating is ideal for trailers near saltwater.

by:

Good product



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
1726
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Correct Replacement Fulton Jack and Winch Strap for Essex Vortex Boat Trailer
    I can see you have a Fulton Bolt-Thru Trailer Jack so you can replace this with the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 which is a direct bolt-on fit and has a 1,200 lb weight capacity. Then for the Fulton XLT1401 Winch, I recommend the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200 which will work great as a direct replacement strap.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement for Fulton Magnum Series Trailer Jack
    The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 if you have a bolt-thru mounting bracket or part # FTJ120W0301 if you have a snap-ring mounting bracket. I have attached a photo of each to help you distinguish which you have.
    view full answer...
    Image 1 for
  • Replacement Jack For A 2004 Ranger Reata VS180 Boat Trailer
    Hey Jeff, Does your Fulton jack have a swivel mount like the # FXP15L does where you can pull a lever and turn the entire jack to get it up out of the way? I've attached a picture of the # FXP15L below as well showing it with a welded on mount instead of using the clamp mount. If this is the case you can swap out just the jack and keep using the same mount welded to the frame. You'll need to remove the snap ring with some pliers and can then pull the jack off of the mount and measure...
    view full answer...
  • Jack Recommendation for Trailer Frame that is 3.5 inch by 3.5 inch
    The jack won't fit unfortunately since the max frame width it can fit is 3 inches but you could pretty easily go with a weld on jack like the Fulton # FXP10W0301.
    view full answer...
    Image 1 for
  • How to Determine if the Fulton Swivel Marine Jack JXP10W0301 Will Fit a Trailer
    I tried searching for the part number you listed but could not find anything with Fulton or online. However, if the mounting bracket on your trailer looks like the part # P9012-00 the Fulton Jack part # FXP10W0301 is going to fit and work well.
    view full answer...
  • Difference Between Snap Ring and Bolt On Boat Trailer Jacks
    A boat trailer jack that uses a snap ring works differently than one that is a bolt-on, like yours, because the mounting bracket for a bolt-on jack and snap-ring jack will be different. Because you have a Fulton 1,200 lb bolt-on jack, I assume your mounting bracket that is welded on accepts a bolt, like part # P9012-00. If this is the case you are going to want a compatible, bolt-on jack, which is the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. This jack has a 1,200 lb capacity,...
    view full answer...
    Image 1 for
  • Is Replacement Hardware Available for Fulton Magnum Series Jack?
    I do not see something we carry that would be an exact replacement. If you can give me your jack's model number it would help me find if we have something that will work for you because the replacement mounting brackets match up to certain manufacturer and models of jacks.
    view full answer...
    Image 1 for Image 2 for
  • Replacement 1200 Pound Fulton Boat Trailer Jack
    From the pictures you sent in the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 is the type of jack you're looking for. The mounting plate that is welded to the trailer, part # P9012-00, looks to be fully intact. You may need new hardware though, part # F0933325S00.
    view full answer...
    Image 1 for
  • Is the Mounting Bracket Included with the Fulton Bolt-Thru Swivel Marine Jack Part # FXP10W0301
    The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part # P9012-00. The plate that you are referring to will attach to the above bracket. As you mentioned, you will need to cut/grind the old bracket off and weld the new one on in order to use this jack. I have attached a review video of the jack for you as well.
    view full answer...
  • Trailer Jack for Use in Off Road Conditions
    The Fulton F2 Swing-Up Trailer Jack with Dual Wheels # F1413060334 may get around better in the conditions you're camping it. It will be hard to find a jack that will move that great on soft surfaces though. The weld-on Fulton Adapter Kit # F500320 mounting holes measure 3-1/2 by 4-1/2 inches.
    view full answer...
    Image 1 for
  • Replacement Fulton Jack for 1999 Javelin Trailer
    The 1/2" pull pin like the one the # FXP10W0301 is their current standard. If you want to use the same mount I would try to see if the pin fits since there is only a 1/8" difference. If not, you could enlarge the hole slightly so the pin can get in there. If you don't want to mess with that the other option would be to get the Fulton Bolt-Thru Swivel Marine Jack w/ Caster # FXP10 and bolt it on next to the old mount.
    view full answer...
  • Replacement Jack for Fulton Magnum on 2003 Ranger Boat Trailer
    The Fulton Bolt-Through Swivel Jack, part # F1411300301 will allow you to use the existing bracket welded to your trailer frame. The jack has a 1500 lb lift capacity, so if your trailer's tongue weight is less than that amount, it'll work great for you. If the through bolt that attaches the jack to the frame mounted bracket is worn or damaged, a replacement is available as part # F0933325S00 which includes the bolt, nut and bushing. This is the highest capacity jack of its type that Fulton...
    view full answer...
    Image 1 for Image 2 for
  • Replacement for Fulton Magnum Series Trailer Jack
    The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 if you have a bolt-thru mounting bracket or part # FTJ120W0301 if you have a snap-ring mounting bracket. I have attached a photo of each to help you distinguish which you have. The bolt holes you are referring to are used as an alternative to mounting the mounting bracket to the frame of the trailer, not the jack to the mounting bracket. I called...
    view full answer...
    Image 1 for
  • Replacement Trailer Jack for Weld On Mount Shelby Jack Model Number 5874A8
    Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 for example. This is compatible with jacks like # FXP10W0301. Your other option is to ditch the welded plate if it doesn't match up and use a mount like that found on the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind...
    view full answer...
    Image 1 for
  • Replacement For Shelby Jack With Weld-On Mounting Bracket
    We don't have the dimensions of the weld-on mount for your Shelby jack, but it looks similar to the Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00. That mounting bracket uses a 1/2" bolt with pin holes measuring 3" apart center-to-center, so you'll want to compare your bracket's measurements. If they are the same, you can use the following: - Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301 Otherwise, your best option is...
    view full answer...
    Image 1 for Image 2 for
  • Determining Correct Replacement Jack For 1999 R71 Ranger Boat Trailer
    Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. You will need to confirm that this jack will be compatible by measuring the mount on your trailer. The # FXP10W0301 needs a mount that uses a 1/2" diameter mounting hole with pin holes that are 3" apart on center. If your mount has these measurements this jack will be an exact replacement. If your mount does NOT have...
    view full answer...
    Image 1 for Image 2 for
  • Replacement for Shelby 5764A Trailer Jack on 2000 Four Winns Horizon 180
    Swapping the mounting hardware on a jack can be done, but it will depend on the specific mounting hardware of the jacks. Shelby jacks and parts are becoming more difficult to locate, so I would recommend replacing your Shelby hardware with something more easily replaceable in the future like the etrailer Marine Jack # MJ-1200B, which has a 1200 lb capacity and 11" lift. If you want to try to match the existing Shelby mounting plate, we do have one jack that may work. The Fulton Bolt-Thru...
    view full answer...
    Image 1 for
  • Replacement For Shelby Trailer Jack 5764A Missing Handle
    Since Shelby is no longer in business, and jack handles are not universal, what that means is there isn't a replacement handle available, so your only option is to get a brand new jack. Since the Shelby is a weld-on jack, the best option we have for a replacement is the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301. You will also need Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00. Of, if you have room on your trailer...
    view full answer...
  • Replacement Trailer Jack for Shelby Model 5764A on Boat Trailer
    We offer weld-on and bolt-on trailer jacks that are similar to the Shelby 5764A jack you wish to replace but the jacks we offer are not exact replacements. We do have a jack that has a mounting plate similar to the Shelby mounting plate., It is part # FXP10W0301. This jack has a 1,2000 lb weight capacity and has a 10 inch lift. The plate used for this jack is part # P9012-00. I have attached a photo of the mounting plate with the dimensions. You can take the same measurements on your existing...
    view full answer...
    Image 1 for
  • Recommended Replacement Jack For Broken Shelby Model 5856A Swivel Trailer Jack
    I have an option for you, but since Shelby is out of business you will not be able to purchase another Model 5856A jack. Instead I recommend replacing it with the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 which will fit your existing jack mount so it will be an exact replacement, and you will actually have a little stronger of a jack as this jack has a 1200lb lift capacity compared to your Shelby jack that had a 1000lb capacity. I...
    view full answer...
  • Replacement Bolt-On Fulton Trailer Jack
    Thank you for the photo it was helpful in determining what you need. The replacement would be the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 which has a bolt-through mount, 1,200 lb lift capacity and has bracket heights of 12-3/4" retracted and 22-3/4" extended. I've added a link to a video review of this jack for you to look at.
    view full answer...
    Image 1 for
  • Disassembling and Replacing Fulton Magnum Series Trailer Jack
    The roll pins that are used in jacks like the Fulton model on your trailer can be difficult to remove because they fit very tightly into place. I just recommend using a punch that is a bit smaller in diameter than the pin and then tap it with a hammer until it loosens up and can be taken out. If you need to replace the unit, we do offer a nice selection of Fulton 1,200 pound trailer jacks that should be very similar to what you have. I recommend looking at the Fulton Bolt-Thru Swivel Marine...
    view full answer...
  • Replacement for Shelby Jack 5856A
    I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 as a replacement for your Shelby 5856A. This works with a bracket like the # P9012-00 that matches your description. This has a 1,200 lb lift capacity and a 10" lift. It also comes with a limited 5-year warranty.
    view full answer...
  • Replacement Jack For A Dorsey Boat Trailer
    I do have a few options for you however, it looks to me like you have a plate bolted onto your trailer with a bracket welded to the top of that. If you are referring to the plate bolted to the frame in which the bracket is welded atop of, we do not have a jack that will fit those bolt holes and replace the custom brackets. Instead you will need to leave your existing brackets on, and replace the jack with either the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 or the Fulton Round,...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Noah M
Updated by:
Noah M
Employee Ryan F
Updated by:
Ryan F
Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<