Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
(52 reviews)
Price: $320.89
In Stock
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
Item # 8-219-4UC3-EZ
Our Price: $320.89
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (52)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-219-4UC3-EZ
- 8 on 6-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- EZ Lube
- 1/2 Inch Stud
- Dexter
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles that require 2-1/8" inner diameter grease seal
- Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately)
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Wheel stud diameter: 1/2"
- Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS-2125DL
- Inner diameter: 2.125"
- Outer diameter: 3.376"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-219-96 Dexter 12" Hub and Drum Assembly for 5.2K to 7K Axle with Hardware - 8 on 6-1/2 - EZ Lube
Replaces 8-219-4UC3-EZ
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not fit
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 - 8-219-4UC3-EZ
Average Customer Rating: 4.7 out of 5 stars (52 Customer Reviews)
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: 12x2 Brakes 6k-7k 8 lug drums04/01/2015
I have a 1999 Kaufman 50' 3 car wedge tri-axle trailer with Dexter 12x2 8 lug 6k lb axles (3 axles) so I ordered new drums (loaded with bearrings, seals, races, lug nuts) and separately ordered backing plates with brakes. Previously I ordered an equalizer shackle kit from etrailer.com and they shipped very fast with free shipping, so i have been a return customer and will continue to be. Great service, fast shipping great prices, and everything works how it should.
by: RandyG12/09/2016
I have ordered all my trailer brakes from e-trailer
I have always been very happy with what I've ordered
If there was something I wasn't sure about I'd look on there web site and find it
Before I ordered from them I shopped around in my own town for parts
what I found is
E-trailer had better parts and someone who was willing to help and not just give you something so you would leave their store because you was asking to many questions
by: Jesse 01/25/2024
great company to work with
by: Skippy08/20/2023
Very fast shipping. Excellent packaging. Instructions were very good.
by: Joel C.07/19/2017
I installed the left assy. today and all went well thanks to all the support and videos. All questions were answered thoroughly and I knew I was in good hands all the way. The product arrived packaged very well without any issues. I will be installing just the break assy. on the right side so that they break even. The only thing I noticed, and I don't know why is that the 8 pressed bolts on the hub were a smaller size than the ones on my 5er. I am glad the nuts were supplied, and hope the smaller size does not interfere with the wheel mounting. 5+ stars for e-trailer.
Instead of crimping the wires together, I soldered them together and then shrink wrapped them, then added water resistant electrical tape around the shrink wrap. I figured this would be more secure than crimping.
by: Alpha11/27/2023
Super customer service!!
by: Marc02/25/2023
Bad seal for the bearings
Jenny N.
2/25/2023
We can take care of that for you. I will have our Customer Service team contact you.
by: Griffin09/09/2022
I gave the wire portion of my order two stars, giving this part of the order one star. I'd give my overall experience with etrailer one star as well. Two main reasons for low ratings: packaging and customer service/support.
by: kdanie03/18/2017
I ordered the Dexter version specifically to avoid any issues but I had one anyway, the studs are smaller dia. than the OEM hubs that came on my Dexter axles. They send new lug nuts with the kit but they are not appropriate for my aluminum wheels requiring additional expense for new lug nuts. Other than the stud size they are exact replacements.
by: David02/24/2019
had to replace all four drums on EZ lube axles as I had already replaced the brakes with the newer never adjust brake kits and this was the perfect patch. Only thing is this kit comes with the Dexter 10-10 grease seal which has a 2.125 I.D. After measuring the axle seal shaft diameter that was 2.252 I went with a double lip seal GS-2250DL leaving it with a .002 interference fit. My order came in only a couple off days and all the parts were as described and in great packaging.
by: Tonna06/20/2018
I contacted James and he helped with with customer support that you just don’t find any more. He took the time to answer my questions and make sure that the parts I needed were the parts I ordered and received. My entire order arrived on the date that they said it would. I would highly recommend E trailer and have already. Recommended them to several fellow ranchers and farmers.
by: Caleb06/21/2016
Super fast shipping. Product was in my hands less than 12 hours after I ordered it. Installed and was back up and running in no time flat. Will def be doing business with again in the future for all of my fleets trailer parts.
by: Chester05/14/2016
Bearing races had surface rust. Cleaned with light sandpaper but I cannot be sure the bearings were not compromised.
by: Cary R.03/08/2016
Very happy with how fast it was shipped and received. It was ordered on Thursday afternoon and arrived the following Monday. Very good quality. I have ordered other items from e-trailer and very happy with their service.
by: Mike08/06/2015
Wrong outer bearing and dust cap, 1 out of 4 hubs. Had to use old parts. Everything else worked fine.
by: James 05/03/2021
Went through the packaging and everything seems to be there. Will know in about a week.
James
5/4/2022
Love the self adjusting brakes. They work great
by: Michael07/14/2018
Parts were delivered on time and were exactly as expected. Everything fit and functions as desired. This was my third experience with e trailer, and customer service was once again second to none.
by: Scott 08/28/2015
American Made, great product, fit perfect and the service and available videos made etrailer purchasing a no-brainer.
by: Ted S.01/12/2015
Perfect fit for my Keystone tri-axle trailer. Thanks Marica
by: James05/22/2021
Had to use the original hub over the bearing. New ones were 1/8” larger in diameter and would not fit.
by: beaner01/17/2017
Great replacement back up hub for trave ling.
by: Donald C.03/13/2015
Everything seems to go together as they are supposed to. Had a little problem with delivery. But once I inquired and the rep discovered the problem she was quick to fix it. I would give an A+ to customer service. Some problems just happen. But how you fix that problem speaks volumes.
by: James03/17/2022
WOW!!Received my order so very quickly and in great condition. the representative I spoke to was very courteous and assured me that the item I ordered would be exactly what I had ordered!!!
Mahalo, all the way from HAWAII11
by: John 09/20/2022
Good Service
by: Gary11/12/2014
Product was exactly what was ordered and delivered quickly. I wish all on-line companies were this proficient.
25
52
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Will 1/2 Inch Wheel Studs Fit Dexter Hub 8-219-4UC3-EZ?If you measured the stud size on your hub and drum assembly and they measured 1/2 inch then they may work with the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ, which also uses 1/2 inch wheel studs. The fact they are both 1/2" does not necessarily mean they will thread onto the new studs as they may be different thread pitches. Keep in mind those are for E-Z Lube axles so if you did not have those you could also use the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3. You will...
view full answer... - Lug Nuts Shearing off Hub and Drum of 7,000 lb Dexter AxleI can only make a guess and can't know for certain, but generally speaking, the two main reasons that lug nuts shear off is that they are overtightened - though you can rule that out if you are sure they were torqued to the manufacturer's specs - or that your wheels have elongated, wider holes. This would make the wheel have excessive movement on the lug nut and cause enough vibration for it to shear off. If you need to replace the hub and drum on your 7,000 lb Dexter axle you can use...
view full answer... - Lug Nut Torque Recommendation for Dexter Hub # 8-219-4UC3-EZ to 17.5 inch Wheel95 ft lbs would be good for torquing the lug nuts of the trailer hub part # 8-219-4UC3-EZ to a 17.5 inch diameter trailer wheel. The acceptable range would be 90 to 120 ft lbs for your setup.
view full answer... - Will a Wheel With Bolt Pattern 8 on 170MM Fit on the Dexter Hub/Drum # 8-219-4UC3-EZ?You will need an adapter to mount a wheel with 8 on 170mm bolt patter to the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ with 8 on 6-1/2" bolt pattern.
view full answer... - Does Dexter E-Z Lube Hub and Drum Assembly 8-219-4UC3-EZ Require Drum Turning Before InstallationThe new hub/drum assemblies like # 8-219-4UC3-EZ that we sell are ready to install. They do not require turning. Cast into the hub you will find the drum's maximum re-bore diameter. If you do in the future have these drums turned be sure to remain within that spec.
view full answer... - Is There 5,200 lb Trailer Hub that has 8 Lug Bolt PatternYes, for 5,200 standard trailer axles we have the hub part # 8-219-4UC3-EZ which is a fit for 5,200 lb axles and has the bolt pattern of 8 on 6-1/2 inches like you said you need.
view full answer... - Do You Carry The Dexter K08-219-96 Trailer Hub and Drum Brake Assembly?Yes, we have the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ that you are looking for. Our part number is different but this is the Dexter K08-219-96 assembly.
view full answer... - What Studs Does the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles UseThe Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 # 8-219-4UC3-EZ uses 1/2" wheel studs like what you currently have. The wheel bolts and lug nuts are included with this assembly.
view full answer... - How To Upgrade From 6 on 5-1/2 Inch Hubs to 8 on 6-1/2 Inch Hubs On a 5,200 Lb or 6,000 Lb AxleIf you have a 5,200 lb or 6,000 lb axle with 6 on 5-1/2" hub/drum assembly that uses 25580 inner and 15123 outer bearings then you can upgrade to an 8 on 6-1/2" hub/drum assembly that uses 25580 inner and 14125A outer bearings because both the 15123 and 14125A outer bearings have the same inner diameter of 1.250". For this, we have the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ which will work well on a 5,200 lb or 6,000 lb axle
view full answer... - Will Dexter Hub # K08-285-96 fit a Lippert axle # nv2422811Yes, the Dexter Hub # K08-285-96 will fit on a Lippert axle # nv2422811. They are both rated for 8K and the bearings and grease seal match up between them. The axle is actually rated at 7K, but that is because it comes with 7K brakes. It is actually an 8K axle and 8K hub.
view full answer... - How To Switch for 5 on 4-1/2 Inch to 4 on 4 Inch Hubs On a Motorcycle Trailer In order to switch for trailer hubs with a 5 on 4-1/2" bolt pattern to trailer hubs with 4 on 4" bolt pattern you'll need to know the bearing numbers. If you have L44649 bearings then you can easily switch to the 4 on 4" bolt pattern using the Trailer Idler Hub Assembly part # AKIHUB-440-2-2K which is pre-greased so there's no mess involved. In order to confirm your bearing numbers you'll need to pull the hubs apart. If you have any other bearing combo then you would't be able to switch hubs.
view full answer...
- What Is the Torque Spec for Axle Nut When Used with Oil Bath HubsThere isn't an exact torque value for the spindle nut regardless of whether or not the hub uses grease or oil. The nut will need to be tightened until there is no side to side play on the hub. It is more of a process by feel rather than specific torque value. The process would be the same for both grease and oil bath hubs.
view full answer... - Will a Dexter Trailer Hub Fit on a Lippert Trailer AxleMany times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that number, I can tell you what parts you will need. Otherwise, if you could not find that tag, you can simply select a hub by matching the bearing and grease seal part numbers from your existing hub. The part numbers for the bearings are usually stamped...
view full answer...
- Hub Pilot Diameter of the Trailer Hub and Drum Assembly # 8-219-4UC3-EZ I went and pulled a Trailer Hub and Drum Assembly # 8-219-4UC3-EZ from our warehouse to measure the snout of it where a rim would fit over it and found it to be 3.5 inches.
view full answer...
- What is Required to Change the Bolt Pattern on Trailer HubsTo change your hub bolt pattern will require you to change hubs to one that has the bolt pattern you need. You will need to know what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. If you get back to me with that information I will help you pick out the right hub...
view full answer...
- 8 Lug Hub and Drum Recommendation for Lippert 5,200 lb Trailer AxleYes, the hub and drum part # 8-219-4UC3-EZ that you referenced would fit and work well for you. This is a 5,200 lb hub and drum that will fit your axle and has the 8 lug bolt pattern you need as well.
view full answer... - Replacement Hub Recommendation for Lippert 6,000 lb AxleYes, the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ that you referenced is a confirmed fit for your Lippert 6k axle that you mentioned but you'll need to verify the grease seal dimension on your spindle. You'll need yours to measure 2.125 inches for this hub to fit. If instead you measure 2.25 you'll need the hub # 42866UC3-EZ instead as it comes with the correct seal for that dimension.
view full answer...
- Hub And Drum Recommendation For Lippert Trailer 7000k AxleThe Dexter E-Z Lube Hub and Drum assembly that would work for your Lippert axles with the bearing and seal numbers you provided is part # 42866UC3-EZ. This fits 5200 lb to 7000 lb axles that require a 2-1/4 inch ID grease seal. The drum dimensions for this measure 12 inches diameter by 2 inches wide. I spoke with my contact at Dexter and they told me they do not test fit their hubs and drums on other manufacturer axles. Based on the bearing and race numbers you provided this will work for you.
view full answer... - Difference Between Hub/Drum # 8-219-4UC3-EZ and # 42866UC3-EZThe only difference between the two hubs is the inside dimension of the grease seal included with the hub drum. The # 42866UC3-EZ uses a 10-36 grease seal with a 2.25 inch inside diameter and the # 8-219-4UC3-EZ uses a 10-10 grease seal that has a 2.125 inside diameter. To determine which is compatible with your existing spindle, you will need to use a digital or dial caliper to measure the surface of the spindle that the grease seal rides against (see diagram). If this surface of your...
view full answer...
- Recommended 8-Lug 12 inch Trailer Hub and Drum Assembly with 2.125 Inch Inner Diameter Grease SealThe hub and drum assembly you are looking for is part # 8-219-4UC3-EZ. This is exactly the same hub as part # 42866UC3-EZ that you referenced, but it comes with the grease seal with a 2.125" innder diameter.
view full answer... - Difference Between 8-219-4UC3-EZ and 42866UC3-EZ 12 Inch Trailer Hub/Brake DrumsYou are correct, the only difference between the # 8-219-4UC3-EZ and # 42866UC3-EZ is the ID of the grease seal. The # 8-219-4UC3-EZ uses a grease seal that has a 2.125 inside diameter while the # 42866UC3-EZ uses a seal with a 2.250 inside diameter.
view full answer... - Are LM67048 and 15123 Bearings Interchangeable On 5,200 Lb AxlesThe LM67048 and 15123 outer bearings are interchangeable since they both measure 1.250" diameter. They are commonly used on 5,200 lb axles. For replacement hubs, we offer the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ part # 8-219-4UC3-EZ for 8-bolt or part # 8-201-9UC3-EZ for 6-bolt. These both use 15123 outer bearings but can be used where the old bearing was a LM67048.
view full answer... - Are Grease Caps Interchangeable It sounds like you are looking for grease caps for an axle with a Lippert hub. The grease caps we offer are designed to fit hubs with specific inner diameter hubs. For example, if you have a hub that measures 3.355 inside diameter, part # 75DC would work for you.
view full answer... - Recommended Hubs/Drums Along With Compatible Wheel And Tire AssembliesIt sounds like you have 7,000 lb Dexter axles by the part numbers you gave. All of the assemblies for that size Dexter axle have 8 on 6-1/2 inch bolt pattern or a 5 spoke utility which is what it sounds like you have. My recommendation is to get the Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - E-Z Lube # 8-219-4UC3-EZ hubs and then you can use special trailer wheels with the more standard options on your utility trailer. For your tires and wheels,...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
David F
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joel C.
7/20/2018
No problems. Install was easy, and product worked fine. The only issue was the studs were a different size than what was on the trailer. I had to purchase new nuts at a different Web site.