Hub And Drum Recommendation For Lippert Trailer 7000k Axle

Updated 03/12/2014 | Published 03/11/2014

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2

(672)

$254.15

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(354)

$172.55

Question:

I asked this question if a Dexter wheel hub would fit the Lippert axles, I gave the information that was asked. Here is the information again from my lippert wheel hubs, outer brg. cone 14125A, outer brg. cup race 14276, Inner brg. 25580, inner cup race 25520, grease seal double lip 2.25inch ID X 3.376inch OD, Hub-drum 1/2inch studs, 8 on 6.50, E-Z lube, Lippert axle NV#193716.

asked by: Gene E

Expert Reply:

The Dexter E-Z Lube Hub and Drum assembly that would work for your Lippert axles with the bearing and seal numbers you provided is part # 42866UC3-EZ. This fits 5200 lb to 7000 lb axles that require a 2-1/4 inch ID grease seal. The drum dimensions for this measure 12 inches diameter by 2 inches wide.

I spoke with my contact at Dexter and they told me they do not test fit their hubs and drums on other manufacturer axles. Based on the bearing and race numbers you provided this will work for you.

expert reply by: Jeffrey L