Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
Updated 07/16/2020 | Published 03/04/2014
Question:
Will a Dexter trailer hub fir a Lippert axle?
asked by: Gene W
Expert Reply:
Many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that number, I can tell you what parts you will need.
Otherwise, if you could not find that tag, you can simply select a hub by matching the bearing and grease seal part numbers from your existing hub. The part numbers for the bearings are usually stamped into the metal of the bearing and the grease seal number is usually stamped in the rubber. I have attached a photo that shows where the part numbers are located. You will also want to make sure you choose a hub with the correct weight capacity and bolt hole pattern. I have attached a help article that explains how to find the bolt hole pattern.
If the hub or bearings were damaged and you cannot locate the part numbers, you can take a few measurements on your spindle. This will tell us what bearings and grease seal you need for us to choose the correct hub. The photo that I attached also shows what measurements to take on your spindle. These measurements must be exact, to the nearest thousandth of an inch, so I recommend using a precise measuring tool such as a digital or dial caliper. Using a ruler or tape measure will not give an accurate measurement for this.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: door hinge
- Search Results: camera
- Search Results: backup camera
- Shop: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black
- Search Results: demco a frame
- Search Results: aluminum ramp
- Shop: Trailer Hitch
- Search Results: 421r
- Shop: TecNiq S18 PC/P2 Surface Mount Marker Light - Clear Lens - Red LED
- Shop: etrailer RapidRamps 6' Long Bolt-On Trailer Ramps for over 6-1/2' Wide Trailers
- Shop: LED Trailer Clearance or Side Marker Light - Submersible - 2 Diodes - Amber LEDs - Clear Lens
- Shop: Lippert Components Clear Oil Cap Kit
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Q&A: Backup Camera that Will Plug In Line with a 7-Way Trailer Connector on a 2005 Toyota Tundra
- Shop: Pace Edwards UltraGroove Retractable Hard Tonneau Cover - Electric - Aluminum - Matte Black
- Search Results: firestone 2625
- Shop: Suspension Enhancement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Q&A: Difference Between the Fulton F142400 and F142401 Winches
- Q&A: What Size Input Jack is on the Replacement Breakaway Cable # BX2940931
- Q&A: What Drum do I Need to Replace My Lippert Drum with 696690 Stamped on it?
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: Bearing Kit for Dexter D35 Trailer Axle
- Shop: Brake Controller
- Q&A: Replacement of Lippert 5200lb Axle, Electric Drum Brakes, and Hub and Drum Assembly
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Video: Measuring To Choose The Right Trailer Axle
on Trailer Hubs and Drums
Berj K.
7/11/2020
i would like to order dexter never adjust brake/hub and brake controller for a utility trailer that never had brakes. i have a lippert axle 3500#. serial#: 045 003540279 LC135-SIAXTK-73-60 NOSP-US-L-545-7242