bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 4000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2016 Ford Transit T250
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13143
In Stock
$220.03
Retail:$354.95
You Save: $134.92
Trailer Hitch
Not Confirmed to Fit

2016 Ford Transit T250

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13143 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (631)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13143

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Fits Standard 2" Accessories: Works with bike racks, cargo carriers, and towing gear
  • Tows up to 4,000 lbs (GTW): Handles small campers, boats, and utility trailers safely
  • Holds up to 600 lbs (TW): Supports heavy-duty loads and hitch-mounted equipment
  • Bolt-On Installation: Mounts directly to frame using included hardware—no welding needed
  • Corrosion-Resistant Finish: Gloss black powder coat over base coat for long-term rust protection
Made in USA

Features to know about

Get More Done with a Solid Class III Hitch: 4,000 lbs GTW and 600 lbs TW

When you want to haul bikes, tow a small camper, or pull a utility trailer, this hitch delivers the strength you need. With a 4,000-lb maximum gross trailer weight and 600-lb tongue weight rating, it’s built for everyday towing and gear hauling. Using a weight distribution setup boosts capacity to 5,000 lbs GTW and 600 lbs TW, giving you plenty of margin for lighter trailers or cargo carriers.

Clean Look That Blends In: Concealed Cross Tube Design

No one wants a hitch that hangs down like an afterthought. The concealed cross tube keeps most of the hardware tucked out of sight so only the 2" receiver is visible under the bumper. It gives your vehicle a clean, factory-style finish while still being ready for racks, cargo trays, or towing accessories whenever you need them.

Simple Bolt-On Install: No Welding Required

You don’t need a lift or special tools to mount this hitch. It bolts directly to existing points on the frame, so there’s no drilling or welding involved. All necessary mounting hardware and instructions come in the box for an easy DIY setup in your garage or driveway.

Built to Last Through Every Season: Powder-Coated Steel Construction

The sturdy, fully welded steel frame is finished with a gloss black powder coat over a protective base layer for superior rust resistance. That double-coat finish helps the hitch handle road salt, rain, and grime without letting corrosion take hold. Once installed, you’ve got reliable strength and long-term durability for towing season after season.

Specs

Receiver Opening

  • Size: 2" x 2"

Class

  • Rating: Class III

Weight Capacity

  • Maximum gross trailer weight: 4,000 lbs
  • Maximum GTW when used with weight distribution: 5,000 lbs
  • Maximum tongue weight: 600 lbs
  • Maximum TW when used with weight distribution: 600 lbs

Warranty

  • Limited lifetime warranty

13143 CURT Class 3 Trailer Hitch Receiver

Installation Details C13143 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

631 reviews
5 Stars
(577)
4 Stars
(43)
3 Stars
(6)
2 Stars
(2)
1 Star
(3)
Review Sort Icon
by:
2012 Lexus RX 350
Trailer hitch was relatively easy to mount to my 2012 Lexus RX350, however, the instructions were a little unclear on torque spec for the bolts. The torque specs were on the page for trimming the plastic undertray, not on the hitch installation page. totally missed them and had to resort to looking them up on the website. Other than that, all is good.
by:
2015 Lexus RX 450h
This was a perfect fit. The price is right. Free shipping, quick delivery. Good instructions, all of the required fasteners. You cannot beat Etrailer
by:
2011 Lexus RX 350
Pretty easy and straight-forward to install. Please please please try to do the job on a lift or jackstands even. I felt that this would have been 20 times harder if I had to install on the ground.
by:
2014 Lexus RX 350
Perfect fit, and I like the quality bolts and washers that came along with it. Very straightforward installation on a 2014 Lexus RX350. Just a little extra labor trimming the plastic underbody tray to clear.
by:
2011 Lexus RX350
2011 Lexus RX350: Hitch arrived faster than expected. Shipping box was damaged but thanks to proper packing there was no damage to the product. Hitch was exactly as described, fit perfectly and looked even nicer than I imagined. It looks nice because you can't really see it all. All you can see is the square tube opening where the ball mount is inserted and the safety chain loops. Even then they're hardly noticeable because they're below the bumper. I also ordered a rubber tube cover which gives it a very clean appearance. Thanks etrailer for a quality product, descriptive installation instructions and great service. The only real difficulty was lifting the hitch into place because I was doing the install by myself lying on the floor of my garage. A bit precarious at times but managed to do the complete install start to finish in less than an hour and a half. If you do have an extra pair of hands to help lift hitch into place, don't hesitate to use them.
Landon S. profile picture

Landon S.

7/28/2015

Ive really only used it a handful of times but it has always performed perfectly.

by:
2014 Lexus RX 350
Bought this hitch for my wife's 2014 RX-350. Installation went just as easy as the demo video explained it. As I'm not a tiny guy I put 3 inch wood blocks under the back wheels after setting the parking brake, and did the job myself. As I'm particular to do things right I took my time - totaling about 1.5 hours till all was done and everything put away. I won't actually use it till July to pull a trailer so I can't comment on how that works, but I don't expect any issues as it is bolted in place very solid.
Ralph S. profile picture

Ralph S.

5/21/2019

I certainly am satisfied with the hitch, it works just fine as expected. Thanks.

by:
Lexus RX 350
So far I can ony report on the “fit and finish”. The hitch reveiver is firmly attached to the frame of my Lexus RX350 with only the receiver visible — unobstusvie 1
by:
2011 Lexus RX 350
We have this hitch installed on our 2011 Lexus RX 350. A local muffler installer who also does trailer hitches did the work in about an hour for about $100. It fits perfectly. We use it exclusively for mounting our Thule receiver bicycle carrier. We are totally satisfied with the hitch and the online selection process on etrailer.com. Although we did not need their phone or online support for this item, we have used their service for other products and feel we can rely on their expertise.

In the photo you can see I have not yet reinstalled the plastic molding that was removed for the installation.
by:
Easy ordering, easy installation. What else can I say.
by:
Pontiac Trans Sport Van
Everything I had hoped it to be! The hitch was delivered right on time as promised. It is of the highest quality, and will certainly last a very long time. I like the way it fits up tight into the bottom trim of the bumper and does not extend below the lowest part of the vehicle. Looks factory but at a much lower cost.

Installation would be easier with two people, especially for lifting it into position and installing the bolts, but I was able to manage it by myself (63 years old). I really appreciate the instructional videos etrailer has created. They are clear and easily understood and I referred to them a couple of times during the process.

I'll be using this primarily to transport my bikes on a tray rack, but like the versatility that I can also use it for small trailers, etc.

For me, this was the best value hitch for the money and I'm very satisfied. I've already recommended this hitch and etrailer to family and neighbors, and can easily recommend both to all.

Thank you!
by:
2015 Lexus RX 350
Well built product; great price and quick delivery. My only comments are: 1) when you provide the directions it would be helpful if you also gave reference points like driver side and passenger side; 2) the hitch extends flush w the fascia which makes it tough to put my Bike rack on the car - all the other hitches that I see (OEM) or after market extend out at least 2 inches - would it be that much of a big deal to extend by an inch or two?
Overall a good product- thank you
by:
Lexus RX350
I recently saw a few ugly trailer hitches installed on Lexus RX 350's. that were big, rusty contraptions hanging below the bumpers. I wanted a hitch that would be hidden and found one on etrailer.com that actually had a great youtube video of installation. The hitch arrived the day after ordering it. I installed it myself without a hoist and it looks factory perfect. I asked trailer.com what wiring harness I would need and was told to contact the dealer who sold the car to the previous owner. With the VIN number, they quickly found out my car had the factory tow package and I knew what harness to purchase. The custom hitch was great and the customer service was the best. I highly recommend etrailer.com
by:
The product works great, but your tracker to find places to install is wrong. Almost wasted the hitch.
by:
2014 Lexus RX 350
The product was reasonably priced, with free shipping, and the quality was exceptional. Arrived as expected. Installation by local mechanics was quick and easy. They even mentioned the product quality was superb. The hitch was needed for a mobility scooter lift. Thank you.
by:
2011 Lexus RX 350
Installed the hitch in about an hour. Didn't have a lift to use, so we jacked up the rear end and put the car on stands. Things went very well. The hitch was as advertised. Thanks.
by:
Easy fit, solid construction and good price compared to other models listed elsewhere.
by:
The hitch was extremely easy to install and has worked flawlessly. The instructions were clear and easy to use and I highly recommend this hitch.
by:
Ford Edge
The delivery is quick, but it didn't pack well. The cover box was broken and my trailer hitch was exposed and got a little bit damage. It's a heavy part and suggest you can have some corrugated paper to protect the edge. Otherwise, this heavy part would punch through the box easily during the delivery.
by:
This is my 5th Curt trailer hitch purchased in the last 3 years. The quality is excellent and the gloss paint is durable as can be. I had an issue of ordering the wrong hitch and the customer service was second to none. I will continue to purchase my Curt hitches from etrailer. Great job! (Btw, love that the hitches comes with the hardware to install them)
Brooke M. profile picture
Etrailer Expert

Brooke M.

6/26/2025

Why thank you, Doug! That is so great to hear :) I hope we are able to continue to help you out with the hitches. :)

by:
2015 Lexus RX 450h
Needed a hitch on our new car for our bike rack. This one fit the car perfectly, hardly shows at all.
by:
2015 Lexus RX 350
Now our RX is ready for the bike rack. Not conspicuous but ready when we want to load the bikes and go. Could not have asked for better product and service.
by:
2013 Lexus RX 350
to be well made. The install instructions were based upon a 2010 Lexus RX350 and I installed the hitch on a 2013 Lexus RX350 without any problem. The install took me about 3 hours working alone without any power tools or lifts. I'm sure a younger person could do it must faster.
by:
Awesome hitch. Looks great on my truck! etrailer.com is the best place to buy with the best prices and fast shipping
by:
2013 Lexus RX 350
Great fit, no issues!
by:
2013 Lexus RX 350
Looks like a factory unit when finished, if you take care trimming the vinyl underskirt. Easily installed with 2 guys and a lift or on the ground with a jack or some support to help with getting the bolts in. Fit is perfect!
25
631
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee Alan C
Video by:
Alan C
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924